Complete List of 2,463+ IS Codes for Civil Engineering

Q: Which is the most important IS code for a civil engineer?

**IS 456:2000 — Plain and Reinforced Concrete: Code of Practice** is the single most referenced IS code in Indian civil engineering. It governs concrete mix design, durability, nominal cover, limit state design of RCC members, detailing, and construction practice. IS 456 is cross-referenced by IS 1893 (seismic), IS 13920 (ductile detailing), IS 10262 (mix design), IS 875 (loads), and IS 800 (composite construction). Next most referenced: IS 800:2007, IS 875 Parts 1-5, and IS 1893 Part 1.

Q: What is the difference between IS 456 and IS 10262?

**IS 456:2000** is the overall code of practice for plain and reinforced concrete — design (working stress and limit state), durability, exposure classes, cover, and detailing. It tells you what the concrete should achieve. **IS 10262:2019** is specifically the Concrete Mix Proportioning guidelines — it tells you how to arrive at the mix (cement, water, fine and coarse aggregates, admixture) that will deliver the grade specified under IS 456. The mix design procedure in IS 10262 uses inputs from IS 456 (target mean strength, max W/C, min cement content) and gives outputs that satisfy durability and strength requirements.

Q: Which IS code is used for earthquake-resistant design in India?

India's seismic design uses the **IS 1893 series**: Part 1:2016 (buildings, zone map, response spectrum, base shear), Part 2:2022 (liquid retaining tanks), Part 3:2014 (bridges, retaining walls), Part 4:2015 (industrial structures), Part 5 (dams, under revision). Always used with **IS 13920:2016** — Ductile Detailing of RCC — which mandates specific detailing for beams, columns, beam-column joints, and shear walls in seismic zones III, IV, and V. Most state PWDs and public-funded projects mandate IS 1893 + IS 13920 for all new construction.

Q: What IS codes are used for steel structure design?

**IS 800:2007** is the core code — limit state and working stress methods for tension, compression, beams, connections, fatigue, fire, and seismic design of steel frames. Supporting: **IS 2062:2011** (hot-rolled structural steel specs — E250 to E550 grades), **IS 808:2021** (steel section dimensions), **IS 4923** (hollow sections — RHS, SHS, CHS), **IS 811** (cold-formed sections), **IS 9595** (arc welding), **IS 4000** (high-strength friction-grip bolts). Fire resistance and composite construction are covered in IS 800 Sections 16 and 10 respectively.

Q: Which IS code is used for wind load calculation?

**IS 875 (Part 3):2015** — basic wind speed (6 zones across India, 33-55 m/s), design wind speed Vz = Vb × k1 × k2 × k3 × k4 (probability, terrain/height, topography, importance factors), design wind pressure pd = 0.6 Vz² (N/m²), force and pressure coefficients. Cyclone-prone areas (Gujarat, TN, AP, Odisha, WB coasts) use k4 = 1.30 for important buildings. Tall or flexible structures (>50 m) require dynamic analysis using the Gust Factor Method instead of the static method.

Q: Which IS code covers TMT bars?

**IS 1786:2008** — High Strength Deformed Steel Bars and Wires for Concrete Reinforcement. Covers grades Fe 415, Fe 500, Fe 500D, Fe 550, Fe 550D, Fe 600 — chemical composition, mechanical properties, bend/rebend tests, weight per metre, and identification marks. **Fe 500D or ductile grades are mandatory in seismic zones III, IV, V** per IS 13920 Clause 5.2 — the higher elongation ensures adequate energy dissipation during earthquakes. ISI mark is mandatory for sale of TMT bars in India.

Indian Standard (IS) codes are the official technical standards published by the Bureau of Indian Standards (BIS) that govern civil engineering practice in India — covering materials, structural design, testing, workmanship, and construction. InfraLens indexes 2,363 IS codes and 100 IRC codes relevant to construction: from structural design codes like IS 456 (Plain and Reinforced Concrete) and IS 800 (Steel Structures), to earthquake design (IS 1893), wind loads (IS 875 Part 3), and material testing (IS 516, IS 2386). Every code page has key clauses, reference values, tables, international equivalents (ACI, ASTM, EN, BS, JIS), QA/QC templates, and instant AI answers with clause references. Search by code number or keyword, browse by category, or download the master Excel — all free.

2,463 codes77 categoriesUpdated April 2026

PDF download links point to Internet Archive / other public sources. InfraLens does not host IS code documents. Details

Most-referenced IS codes for civil engineers

The essential codes you'll use on almost every project. Click any card to see clauses, key values, tables, and FAQs.

IS 456:2000

Plain and Reinforced Concrete

Foundational code for every RCC structure — mix design requirements, nominal cover by exposure class, limit state design, durability, and detailing. Referenced by IS 1893, IS 10262, and IS 13920. Essential for structural engineers.

IS 800:2007

General Construction in Steel

Limit state design of steel structures — tension, compression, buckling, beams, lateral-torsional buckling, bolted and welded connections, fatigue, and fire resistance. Indian counterpart to AISC 360 and Eurocode 3.

IS 875 Part 3:2015

Wind Loads on Buildings

Wind load calculation — basic wind speed zones (33-55 m/s across India), design wind speed (Vz with k1-k4 factors), wind pressure, force coefficients, and gust factor method for tall structures.

IS 1893 Part 1:2016

Earthquake Resistant Design

Seismic zone map (Zones II-V), response spectrum, base shear calculation, importance factor, time period formulas. Mandatory in zones III, IV, V. Pairs with IS 13920 for ductile detailing.

IS 10262:2019

Concrete Mix Proportioning

Guidelines for proportioning concrete mixes — water content, entrapped air, cement content, aggregate ratios. Used with IS 456 exposure classes and IS 383 aggregate specs. Reference for every RMC batching plant.

IS 1786:2008

TMT Bars — High Strength Deformed Steel

Specification for TMT bars — Fe 415, Fe 500, Fe 500D, Fe 550, Fe 550D, Fe 600 grades. Chemical composition, bend tests, weight, identification marks. Fe 500D mandatory in seismic zones III-V.

IS 13920:2016

Ductile Detailing of RCC

Seismic detailing — stirrup spacing in plastic hinge zones, beam-column joints, shear walls, splice locations, strong-column-weak-beam capacity. Mandatory for ductile frames. Pairs with IS 1893.

IS 516:2021

Methods of Test for Concrete

Strength testing — cube and cylinder compressive strength, flexural strength, splitting tensile, NDT. The QA/QC workhorse referenced in every project spec. Sampling frequency per IS 456 Clause 15.

Electrical Installations

42 codes

Code	Title	Year	Status
IS 694	PVC insulated cables for working voltages up to and including 1100 V	1990	Current	View →
IS 732	Code of practice for electrical wiring installations	1989	Current	View →
IS 1293	Plugs and socket-outlets of rated voltage up to and including 250 V and rated current up to and including 16 A	2019	Current	View →
IS 1554 Part 1	PVC insulated (heavy duty) electric cables for working voltages up to and including 1100 V - Part 1: For aluminium conductors	1988	Current	View →
IS 2309	Code of practice for protection of buildings and structures from lightning	1989	Current	View →
IS 3043	Code of practice for earthing	1987	Current	View →
IS 4691	Degrees of Protection Provided by Enclosures (IP Code)	2018	Current	View →
IS 8130	Conductors for insulated electric cables and flexible cords - Copper and copper alloy conductors	1984	Current	View →
IS 12640 Part 1	Miniature circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for ac operation	1988	Superseded	View →
IS 13947 Part 1	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules	1993	Current	View →
IS 16461 Part 1	Low-voltage electrical installations - Part 1: General requirements	2016	Current	View →
IS 16461 Part 4, Section 41	Low-voltage electrical installations - Part 4: Protection for safety - Section 41: Protection against electric shock	2016	Current	View →
IS 16461 Part 5, Section 54	Low-voltage electrical installations - Part 5: Selection and erection of electrical equipment - Section 54: Earthing arrangements and protective conductors	2016	Current	View →
IS/IEC 60898 Part 1	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for ac operation	2002	Current	View →
IS/IEC 62305 Part 1	Protection against lightning - Part 1: General principles	2012	Current	View →
IS/IEC 62305 Part 3	Protection against lightning - Part 3: Physical damage to structures and life hazard	2010	Current	View →
IS 325	Three Phase Induction Motors	1996	Current	View →
IS 730	Copper Wire for General Engineering Purposes	2018	Current	View →
IS 996	Single Phase Small AC and Universal Electric Motors	2019	Current	View →
IS 1288	Methods of Test for Mineral Insulating Oils Used in Electrical Equipment	2000	Current	View →
IS 2147	Degrees of Protection Provided by Enclosures for Low Voltage Switchgear and Controlgear	2019	Current	View →
IS 2274	Code of practice for electrical wiring in residential buildings	1976	Current	View →
IS 3444	Aluminium Alloy Conductors for Overhead Power Lines	2020	Current	View →
IS 3646	Code of Practice for Interior Illumination	2009	Current	View →
IS 3854 Part 1	Switches for household and similar fixed electrical installations - Part 1: General requirements	2013	Current	View →
IS 5831	PVC Insulation and Sheath of Electric Cables	2018	Current	View →
IS 7098 Part 1	Cross-linked polyethylene insulated PVC sheathed cables for working voltages from 1.1 kV up to and including 3.3 kV	1988	Current	View →
IS 7098 Part 2	Cross-linked polyethylene insulated PVC sheathed cables for working voltages from 3.3 kV up to and including 33 kV	1985	Current	View →
IS 9537 Part 1	Conduits for electrical installations - Part 1: General requirements	1980	Current	View →
IS 9537 Part 2	Conduits for electrical installations - Part 2: Flexible steel conduits	1981	Current	View →
IS 9537 Part 3	Conduits for electrical installations - Part 3: Rigid steel conduits	1983	Current	View →
IS 9537 Part 4	Conduits for electrical installations - Part 4: Rigid non-metallic conduits (PVC)	2013	Current	View →
IS 10810 Part 2	Conductors for insulated cables and flexible cords - Part 2: Aluminium conductors	1984	Current	View →
IS 12049	Star Rating for Refrigerating Appliances	2009	Current	View →
IS 12640 Part 2	Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules	1993	Current	View →
IS 13098 Part 1	Cross-linked polyethylene insulated PVC sheathed cables for working voltages up to and including 1100 V - Part 1: For copper and aluminium conductors	1992	Current	View →
IS 14772	Specification for single-phase and three-phase distribution boards	1999	Current	View →
IS 17048	Halogen-free, low smoke (HFFR) cables for working voltages up to and including 1100 V	2018	Current	View →
IS 440	Flux Cored Solder Wire	2020	Current	View →
IS 6307	Porcelain Insulators for Overhead Power Lines	2018	Current	View →
IS 12559	Code of practice for selection, installation and maintenance of electrical equipment for building construction sites	1988	Current	View →
IS 17094	Fire resistant low smoke (FR-LS) cables for working voltages up to and including 1100 V	2019	Current	View →

Soil and Foundation

28 codes

Related:Handbook (SBC)

Code	Title	Year	Status
IS 1498	Classification and identification of soils for general engineering purposes	1970	Current	View →
IS 1888	Method of load test on soils for shallow foundations	1982	Current	View →
IS 1892	Code of practice for site investigations for foundations	1979	Current	View →
IS 2131	Method for standard penetration test for soils	1981	Current	View →
IS 2720 Part 2	Methods of test for soils - Determination of water content	1973	Current	View →
IS 2720 Part 4	Methods of test for soils - Grain size analysis	1985	Current	View →
IS 2720 Part 5	Methods of test for soils - Determination of liquid and plastic limits	1985	Current	View →
IS 2720 Part 7	Methods of test for soils - Determination of water content-dry density relation using light compaction	1980	Current	View →
IS 2720 Part 8	Methods of test for soils - Determination of water content-dry density relation using heavy compaction	1983	Current	View →
IS 2720 Part 16	Methods of test for soils - Laboratory determination of CBR	1987	Current	View →
IS 2720 Part 30	Methods of test for soils - Determination of in-situ shear strength by vane shear test	1980	Current	View →
IS 2911 Part 3	Code of practice for design and construction of pile foundations - Under-reamed piles	2021	Current	View →
IS 2911 Part 4	Code of practice for design and construction of pile foundations - Load test on piles	2021	Current	View →
IS 6403	Code of practice for determination of bearing capacity of shallow foundations	1981	Current	View →
IS 8009 Part 1	Code of practice for foundation on expansive soils - Plain and reinforced concrete foundations	1976	Current	View →
IS 2132	Code of practice for thin-walled tube sampling of soils	1986	Current	View →
IS 2720 Part 10	Methods of test for soils - Determination of unconfined compressive strength	1991	Current	View →
IS 2720 Part 13	Methods of test for soils - Direct shear test	1986	Current	View →
IS 2720 Part 15	Methods of test for soils - Determination of consolidation properties	1986	Current	View →
IS 2911 Part 1/Sec 1	Code of practice for design and construction of pile foundations - Concrete piles - Bored cast in-situ piles	2010	Current	View →
IS 2911 Part 1/Sec 2	Code of practice for design and construction of pile foundations - Concrete piles - Driven cast in-situ piles	2010	Current	View →
IS 2911 Part 1/Sec 3	Code of practice for design and construction of pile foundations - Concrete piles - Driven precast concrete piles	2010	Current	View →
IS 2911 Part 1/Sec 4	Code of practice for design and construction of pile foundations - Concrete piles - Precast concrete piles	2010	Current	View →
IS 4968 Part 1	Method for subsurface sounding for soils - Static cone penetration test	1976	Current	View →
IS 4968 Part 2	Method for subsurface sounding for soils - Dynamic cone penetration test	1976	Current	View →
IS 10807	Code of practice for design and construction of isolated footings	1983	Current	View →
IS 15382	Code of practice for design of retaining walls	2002	Current	View →
IS 2720 Part 11	Methods of test for soils - Determination of shear strength parameters of a soil by consolidated undrained triaxial compression test with pore water pressure measurement	1986	Current	View →

Roads and Pavement

94 codes

Related:IRC Codes Hub

Code	Title	Year	Status
IRC SP 20	Rural Roads Manual	2002	Current	View →
IRC 37	Guidelines for the Design of Flexible Pavements	2018	Current	View →
IRC 58	Guidelines for the Design of Plain Jointed Rigid Pavements for Highways	2015	Current	View →
IS 73	Paving Bitumen - Specification	2013	Current	View →
IS 516 Part 1	Methods of Test for Strength of Concrete: Part 1 Destructive tests on hardened concrete	2021	Current	View →
IS 2386 Part 4	Methods of Test for Aggregates for Concrete: Part 4 Mechanical properties	1963	Current	View →
IS 2720 Part 1	Methods of Test for Soils: Part 1 Preparation of dry soil sample for various tests	1983	Current	View →
IS 2720 Part 3	Methods of Test for Soils: Part 3 Determination of specific gravity	1980	Current	View →
IS 11991	Specification for Wet Mix Macadam (WMM) - Aggregates	1987	Current	View →
IRC SP 11	Handbook of Quality Control for Construction of Roads and Runways	2015	Current	View →
IRC 15	Standard Specifications and Code of Practice for Construction of Concrete Roads	2017	Current	View →
IRC SP 16	Guidelines for Surface Evenness of Highway Pavements	2019	Current	View →
IRC SP 19	Manual for Survey, Investigation and Preparation of Road Projects	2001	Current	View →
IRC SP 21	Guidelines for Design of Intersection and Grade Separated Structures	2009	Current	View →
IRC SP 23	Criteria for Design of Vertical Curves	2012	Current	View →
IRC SP 25	Guidelines for Design and Construction of WBM Roads	2019	Current	View →
IRC SP 27	Guidelines for the Design of Flexible Pavements for Airfield Runways	2009	Current	View →
IRC SP 30	Manual on Economic Evaluation of Highway Projects in India	2009	Current	View →
IRC 34	Recommendations for Road Construction in Waterlogged Areas	2011	Current	View →
IRC 35	Code of Practice for Road Markings	2015	Current	View →
IRC 36	Recommended Practice for the Construction of Earth Embankments for Road Works	2010	Current	View →
IRC 38	Guidelines for Design of Horizontal Curves for Highways and Design Tables	1988	Current	View →
IRC SP 40	Guidelines on Measures for Safety on Existing Two-Lane National Highways	2019	Current	View →
IRC SP 41	Guidelines on Design of At-Grade Intersections in Rural and Urban Areas	2005	Current	View →
IRC SP 42	Guidelines on Road Drainage	2014	Current	View →
IRC 43	Recommended Practice for Sizes and Number of Toll Booths on Highways	1972	Current	View →
IRC 44	Guidelines for Cement Concrete Mix Design for Pavements	2017	Current	View →
IRC SP 44	Highway Safety Code	2019	Current	View →
IRC SP 47	Guidelines on Quality Systems for Road Construction	2018	Current	View →
IRC SP 48	Hill Road Manual	1998	Current	View →
IRC SP 49	Guidelines on Use of Geosynthetics in Highway Engineering	2014	Current	View →
IRC SP 50	Guidelines on Urban Drainage	2013	Current	View →
IRC 52	Recommendations About the Alignment Survey and Geometric Design of Hill Roads	2001	Current	View →
IRC SP 53	Guidelines on Use of Modified Bitumen in Road Construction	2010	Current	View →
IRC SP 55	Guidelines on Safety in Road Construction Zones	2014	Current	View →
IRC 56	Recommended Practices for Treatment of Embankment and Roadside Slopes for Erosion Control	2011	Current	View →
IRC 57	Recommended Practice for Sealing of Joints in Concrete Pavements	2018	Current	View →
IRC SP 58	Guidelines for Use of Fly Ash in Road Embankments	2015	Current	View →
IRC SP 59	Guidelines for Use of Geosynthetics as Reinforcement in Road Embankments	2019	Current	View →
IRC SP 60	Tentative Guidelines for the Use of Waste Materials in Road Construction	2002	Current	View →
IRC 62	Guidelines for Design and Construction of Cement Concrete Pavements for Rural Roads	2014	Current	View →
IRC SP 62	Guidelines for Design and Construction of Cement Concrete Pavements for Low Volume Roads	2014	Current	View →
IRC SP 63	Guidelines for Design of Toll Plazas	2018	Current	View →
IRC 64	Guidelines for Capacity of Roads in Rural Areas	2017	Current	View →
IRC SP 64	Guidelines for Capacity of Roads in Rural Areas	2017	Current	View →
IRC 65	Recommended Practice for Traffic Rotaries	2017	Current	View →
IRC 67	Code of Practice for Road Signs	2012	Current	View →
IRC SP 68	Guidelines for Construction of Roller Compacted Concrete Pavements	2005	Current	View →
IRC SP 69	Guidelines on Traffic Calming Measures for Safe Mixed Traffic	2018	Current	View →
IRC 70	Guidelines on Regulation and Control of Mixed Traffic in Urban Areas	2017	Current	View →
IRC SP 70	Guidelines for the Use of Cement Treated and Recycled Materials in Road Construction	2005	Current	View →
IRC SP 72	Guidelines for the Design of Flexible Pavements for Low Volume Rural Roads	2015	Current	View →
IRC 73	Geometric Design Standards for Single Lane Roads in Rural Areas	1980	Current	View →
IRC SP 73	Manual of Specifications and Standards for Two-Laning of Highways with Paved Shoulders	2015	Current	View →
IRC 75	Guidelines for the Design of High Embankments	2015	Current	View →
IRC SP 75	Guidelines for Design and Construction of Concrete Roads Using Roller Compacted Concrete	2008	Current	View →
IRC SP 76	Guidelines for Conventional and Thin White-Topping	2015	Current	View →
IRC SP 78	Guidelines for Decongestion of Traffic in Urban Areas	2014	Current	View →
IRC 80	Type Designs for Pick Up Bus Stops on National Highways	2018	Current	View →
IRC SP 81	Guidelines for Strengthening of Flexible Pavements Using Benkelman Beam Deflection Technique	2019	Current	View →
IRC SP 82	Guidelines for Design of Reinforced Soil Walls with Inextensible Reinforcements	2015	Current	View →
IRC SP 83	Guidelines for Maintenance, Repair and Rehabilitation of Cement Concrete Pavements	2018	Current	View →
IRC SP 84	Manual of Specifications and Standards for Expressways	2019	Current	View →
IRC 86	Geometric Design Standards for Rural Highways	2018	Current	View →
IRC 87	Guidelines for Planning and Design of Interchanges for National Highways	2018	Current	View →
IRC SP 87	Manual of Specifications and Standards for Four Laning of Highways	2013	Current	View →
IRC SP 88	Guidelines on Provision of Speed Breakers for Control of Vehicular Speeds	2019	Current	View →
IRC 89	Guidelines for Design and Construction of Soil-Nail Supported Structures	2018	Current	View →
IRC SP 89	Guidelines for Soil and Granular Material Stabilization Using Cement, Lime and Fly Ash	2018	Current	View →
IRC SP 90	Guidelines on Designing Noise Abatement Measures for Urban Roads	2010	Current	View →
IRC SP 91	Guidelines for Road Tunnels	2019	Current	View →
IRC SP 92	Manual on Use of Cold Mix Technology in Construction and Maintenance of Roads	2015	Current	View →
IRC SP 93	Guidelines on Requirements for Environmental Clearance for Road Projects	2017	Current	View →
IRC SP 98	Guidelines for the Use of Waste Plastic in Hot Bituminous Mixes	2013	Current	View →
IS 1201	Methods for Testing Tar and Bituminous Materials — Sampling	2020	Current	View →
IS 1206	Methods for Testing Tar and Bituminous Materials — Viscosity	2020	Current	View →
IS 1209	Methods for Testing Tar and Bituminous Materials — Specific Gravity	2018	Current	View →
IS 1755	Code of Practice for Selection and Storage of Bituminous Materials	2015	Current	View →
IS 3812 Part 1	Pulverized Fuel Ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete	2021	Current	View →
IS 8887	Cationic Bitumen Emulsion - Specification	2018	Current	View →
IS 9167	Bitumen Emulsion for Roads	2019	Current	View →
IS 11990 Part 1	Specification for Water Bound Macadam: Part 1 Aggregates	1987	Current	View →
IS 15462	Polymer Modified Bitumen (PMB) - Specification	2019	Current	View →
IS 15682	Hot Applied Thermoplastic Road Marking Materials - Specification	2017	Current	View →
IS 15684	Retro-Reflective Sheeting for Road Signs - Specification	2018	Current	View →
IS 16868	Crumb Rubber Modified Bitumen (CRMB) - Specification	2019	Current	View →
IRC SP 46	Guidelines for Design and Construction of Fibre Reinforced Concrete Pavements	2013	Current	View →
IRC SP 71	Guidelines for Design and Construction of Continuously Reinforced Concrete Pavement	2018	Current	View →
IRC SP 79	Tentative Specifications for Stone Matrix Asphalt	2008	Current	View →
IRC SP 107	Guidelines for Gap Graded Rubberized Bitumen Mix Surfacing	2015	Current	View →
IS 218	Glass Beads for Road Marking	2014	Current	View →
IS 7784	Code of Practice for Design of Parallel Runway Drainage	2010	Current	View →
IS 14792	Use of Geogrids in Permanent Pavement - Guidelines	2000	Current	View →
IS 217	Cutback Bitumen - Specification	1988	Current	View →

Fire Safety

58 codes

Related:Design Rules (Fire)

Code	Title	Year	Status
NBC 2016 Part 4	National Building Code of India 2016 - Fire and Life Safety	2016	Current	View →
IS 2189	Code of Practice for Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System	1999	Current	View →
IS 12349	Fire protection-safety signs	1988	Current	View →
IS 13716	Code of Practice for Fire Safety of Educational Buildings	1993	Current	View →
IS 13848	Code of Practice for Fire Safety of Industrial Buildings	1993	Current	View →
IS 15228	Code of Practice for Installation, Testing and Maintenance of Emergency and Standby Power Systems	2002	Current	View →
IS 15322	Code of Practice for Fire Safety in High Rise Buildings	2003	Superseded	View →
IS 15683 Part 1	Fixed Fire Fighting Systems - General Requirements	2006	Current	View →
IS 16290	Passive Fire Protection for Buildings - General Requirements	2014	Current	View →
IS 16550	Fire Safety in Building Design and Construction - General Guidelines	2018	Current	View →
IS 16568 Part 1	Fire Resistant Door and Shutter Assemblies - General Requirements	2019	Current	View →
IS 16703	Automatic Sprinkler Systems - Design, installation, and maintenance - Code of Practice	2017	Current	View →
IS 951	Portable Fire Extinguishers - General Requirements	2009	Current	View →
IS 1646	Code of Practice for Fire Safety of Buildings (General) : Fire Fighting Equipment and its Maintenance	1997	Current	View →
IS 3614	Specification for Fire Resisting Doors	2017	Current	View →
IS 3844	Code of Practice for Installation and Maintenance of Internal Hydrants and Hose Reels on Premises	1989	Current	View →
IS 8757	Glossary of Terms Associated with Fire Safety	1999	Current	View →
IS 10074	Code of Practice for Fire Safety of Hotels	1982	Current	View →
IS 11057	Recommendations for Fire Safety of Buildings — General Principles of Fire Grading and Classification	2004	Current	View →
IS 12347	Code of Practice for Fire Safety of Buildings: Smoke Control Systems	1991	Current	View →
IS 12407	Graphic symbols for fire protection plans	1988	Current	View →
IS 12777	Method for Classification of Flame Spread of Products	1989	Current	View →
IS 14435	Code of practice for fire safety in educational institutions	1997	Current	View →
IS 15381	Fire Blanket	2003	Current	View →
IS 15683 Part 2	Fixed Fire Fighting Systems - Carbon Dioxide Systems	2009	Current	View →
IS 16182 Part 1	Fire Protection of Electrical Installations - General	2014	Current	View →
IS 1603	Specification for Automatic Sprinkler Heads	1986	Current	View →
IS 1643	Code of practice for fire safety of buildings (general): Exposure hazard	1988	Current	View →
IS 2726	Code of practice for fire safety of industrial buildings: Cotton ginning and pressing (including cotton seed delivering)factories	1988	Current	View →
IS 3034	Fire Safety of Industrial Buildings: Electrical Generating and Distributing Stations - Code of Practice	1993	Current	View →
IS 3058	Code of practice for fire safety of industrial buildings: Viscose rayon yarn and/or staple fibre plants	1990	Current	View →
IS 3079	Code of practice for fire safety of industrial buildings: Cotton textile mills	1990	Current	View →
IS 3594	Code of practice for fire safety of industrial buildings: General storage and warehousing including cold storage	1991	Current	View →
IS 3595	Code of Practice for Fire Safety of Industrial Buildings: Coal Pulverizers and Associated Equipments	2002	Current	View →
IS 3808	Method of test for non-combustibility of building materials	1979	Current	View →
IS 3809	Fire resistance test for structures	1979	Current	View →
IS 3836	Fire Safety of Industrial Buildings - Jute Mills - Code of Practice	2000	Current	View →
IS 4226	Code of practice for fire safety of industrial building: Aluminium/Magnesium powder factories	1988	Current	View →
IS 4886	Code of practice for fire safety of industrial buildings: Tea factories	1991	Current	View →
IS 6329	Code of Practice for Fire Safety of Industrial Buildings - Saw Mills and Wood Works	2000	Current	View →
IS 8274 Part 1	Fire Resistant Structures - General Principles	1992	Current	View →
IS 8758	Recommendations for fire precautionary measures in the construction of temporary structures and pandals	1993	Current	View →
IS 8758	Recommendations for fire precautionary measures in the construction of temporary structures and pandals	2013	Current	View →
IS 8758	Recommendations for fire precautionary measures in the construction of temporary structures and pandals (BI-LINGUAL)	2000	Current	View →
IS 9109	Fire Safety of Industrial Buildings - Paint and Varnish Factories - Code of Practice	2000	Current	View →
IS 10459	Code of Practice for Fire Safety of High-Rise Residential Buildings	1982	Superseded	View →
IS 11457	Code of practice for fire safety of chemical industries, Part 1: Rubber and plastic	2000	Current	View →
IS 11460	Code of Practice for Fire Safety of Libraries and Archives	1985	Current	View →
IS 12456	Fire Protection of Electronic Data Processing Installation - Code of Practice	2004	Current	View →
IS 12458	Method of fire resistance test of firestops	1988	Current	View →
IS 12459	Code of Practice for Fire Safety in Cable Runs	1988	Current	View →
IS 13045	Code of Practice for Fire Safety of Industrial Buildings: Flour Mills	1991	Current	View →
IS 13694	Code of practice for fire safety in iron and steel industries	1993	Current	View →
IS 14689	Code of Practice for Fire Safety in Industrial Buildings (Printing and Publishing Industry)	1999	Current	View →
IS 14850	Fire Safety of Museums - Code of Practice	2000	Current	View →
IS 15394	Fire Safety in Petroleum Refineries and Fertilizer Plants - Code of Practice	2003	Current	View →
IS 16361	Code of Practice for Fire Safety in Existing Buildings	2016	Current	View →
IS 9972	Code of Practice for Fire Safety of Hospitals	1981	Current	View →

Concrete

26 codes

Related:Mix Design QA/QC Templates

Code	Title	Year	Status
IS 383	Coarse and Fine Aggregates for Concrete - Specification	2016	Current	View →
IS 456	Plain and Reinforced Concrete - Code of Practice	2000	Current	View →
IS 516 Part 1/Sec 1	Methods of Tests for Strength of Concrete - Part 1: Hardened Concrete - Section 1: Compressive, Flexural and Split Tensile Strength	2021	Current	View →
IS 1199 Part 2	Fresh Concrete - Methods of Sampling and Testing - Part 2: Determination of Slump	2018	Current	View →
IS 1199 Part 3	Fresh Concrete - Methods of Sampling and Testing - Part 3: Determination of Compacting Factor	2018	Current	View →
IS 1489 Part 1	Portland-Pozzolana Cement - Part 1: Flyash Based - Specification	1991	Current	View →
IS 2386 Part 1	Methods of Test for Aggregates for Concrete - Part 1: Particle Size and Shape	1963	Current	View →
IS 2386 Part 3	Methods of Test for Aggregates for Concrete - Part 3: Specific Gravity, Density, Voids, Absorption and Bulking	1963	Current	View →
IS 4926	Ready-Mixed Concrete - Specification	2003	Current	View →
IS 10262	Concrete Mix Proportioning - Guidelines	2019	Current	View →
IS 12269	Ordinary Portland Cement, 53 Grade - Specification	2015	Current	View →
IS 516 Part 5/Sec 1	Methods of Tests for Strength of Concrete - Part 5: Non-Destructive Testing of Concrete - Section 1: Ultrasonic Pulse Velocity	2021	Current	View →
IS 516 Part 5/Sec 2	Methods of Tests for Strength of Concrete - Part 5: Non-Destructive Testing of Concrete - Section 2: Rebound Hammer	2021	Current	View →
IS 1489 Part 2	Portland-Pozzolana Cement - Part 2: Calcined Clay Based - Specification	1991	Current	View →
IS 3025	Specification for Water for Making Concrete	1991	Current	View →
IS 4034	Method of Test for Fineness of Hydraulic Cement by Blaine Air Permeability Apparatus	1988	Current	View →
IS 6745	Method for Determination of Density of Hardened Concrete	1994	Current	View →
IS 8112	Ordinary Portland Cement, 43 Grade - Specification	2013	Current	View →
IS 8543	Code of Practice for Bonded Post-Tensioned Concrete	2019	Current	View →
IS 9103	Admixtures for Concrete - Specification	1999	Current	View →
IS 9844	Ready-Mixed Concrete — Code of Practice	2006	Current	View →
IS 13111	Non-destructive testing of concrete - Method of test - Ultrasonic pulse velocity	1991	Superseded	View →
IS 13311 Part 2	Non-destructive testing of concrete - Methods of test - Part 2: Rebound hammer	1992	Superseded	View →
IS 1343	Prestressed Concrete - Code of Practice	2012	Current	View →
IS 15607	Fibre Reinforced Concrete - Code of Practice	2005	Current	View →
IS 15658	Self-Compacting Concrete - Guidelines	2006	Current	View →

Fire Fighting

125 codes

Related:Design Rules

Code	Title	Year	Status
IS 2190	Selection, Installation and maintenance of first-aid fire extinguishers - Code o Practice	2010	Current	View →
IS 2925	Specification for Industrial Safety Helmets(Bi-Lingual)	1984	Current	View →
IS 2925	Specification for Industrial Safety Helmets (Bilingual)	2000	Current	View →
IS 4151	Specification for protective helmets for scooter and motorcycle riders	1993	Current	View →
IS 14609	Dry Chemical Powder for Fighting A, B, C, Class Fires -Specification	1999	Current	View →
IS 14851	Maintenance of Fire Hose - Code of Practice	2000	Current	View →
IS 15105	Design and Installation of Fixed Automatic Sprinkler Fire Extinguishing Systems - Code of Practice	2002	Current	View →
IS 15301	Installation and Maintenance of Fire Fighting Pumps - Code of Practice	2003	Current	View →
IS 15908	Selection, Installation and Maintenance of Control and Indicating Equipment for Fire Detection and Alarm System Code of Practice	2011	Current	View →
IS 884	Specification for First-Aid Hose-Reel For Fire Fighting	1985	Current	View →
IS 908	Specification for Fire Hydrant, Stand Post Type	1975	Current	View →
IS 2171	Specification for portable fire extinguishers, dry powder (cartridge type)	1999	Current	View →
IS 2546	Specification for galvanized mild steel fire bucket	1974	Current	View →
IS 2878	Fire Extinguisher, Carbon Dioxide Type (Portable and Trolley Mounted) -Specification	2004	Current	View →
IS 4308	Specification for Dry Chemical Powder for Fighting B and C Class Fires	2003	Current	View →
IS 4947	Specification for Gas cartridges for use in fire extinguishers	2006	Current	View →
IS 5131	Dividing Breeching with Control for Fire Brigade Use -Specification	2002	Current	View →
IS 5290	Specification for landing valves	1993	Current	View →
IS 6234	Portable Fire Extinguishers Water Type (Stored Pressure) -Specification	2003	Current	View →
IS 7673	Fire Fighting Equipment - Glossary of Terms	2004	Current	View →
IS 8090	Specification for Couplings, Branch Pipe, and Nozzle Used in Hose Reel Tubing for Fire Fighting	1976	Current	View →
IS 10204	Specification for portable fire extinguisher mechanical foam type	2001	Current	View →
IS 13039	External hydrant systems - provision and maintenance - Code of practice	1991	Current	View →
IS 13849	Specification for portable fire extinguisher dry powder type (constant pressure)	1993	Current	View →
IS 15397	Portable Fire Extinguisher Mechanical Foam Type (Stored Pressure) -Specification	2003	Current	View →
IS 15517	Gaseous Fire Extinguishing Systems - HFC 227ea (Hepta Fluoro Propane) Extinguishing Systems	2004	Current	View →
IS 15528	Gaseous Fire Extinguishing Systems - Carbon Dioxide Total Flooding and Local Application ( Sub-Floor and In-Cabinet), High and Low Pressure (Refrigerated) Systems	2004	Current	View →
IS 901	Specification for Couplings, Double Male And Double Female, Instantaneous Pattern For Fire Fighting	1988	Current	View →
IS 902	Specification for Suction Hose Couplings For Fire Fighting Purposes	1992	Current	View →
IS 903	Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specification	1993	Current	View →
IS 905	Specification for Delivery Breechings, Dividing And Collecting Instantaneous Pattern For Fire Fighting Purposes	1980	Current	View →
IS 906	Specification for Revolving Branch Pipe For Fire Fighting	1988	Current	View →
IS 907	Specification for Suction Strainers, Cylindrical Type For Fire Fighting Purposes	1984	Current	View →
IS 909	Specification for Underground Fire Hydrant, Sluice Valve Type	1992	Current	View →
IS 910	Specification for Combined Key For Hydrant, Hydrant Cover And Lower Valve	1980	Current	View →
IS 926	Specification For Fireman's Axe	1985	Current	View →
IS 927	Specification For Fire Hooks	1981	Current	View →
IS 928	Specification For Fire Bells	1984	Current	View →
IS 937	Specification for Washers For Water Fittings For Fire Fighting Purposes	1981	Current	View →
IS 939	Specification for Snatch Block for Use with Fibre Rope for Fire Brigade Use	1977	Current	View →
IS 940	Specification for Portable Fire Extinguisher, Water Type (Gas Cartridge)	2003	Current	View →
IS 941	Specification for Blower and Exhauster for Fire Fighting	1985	Current	View →
IS 942	Functional Requirements for 275 1/Min Portable Pump Set for Fire Fighting	1982	Current	View →
IS 943	Functional Requirements for 680-1/Min Trailer Pump For Fire Brigade Use	1979	Current	View →
IS 944	Functional Requirements of 1800-1/Min Trailer Pump For Fire Brigade Use	1979	Current	View →
IS 947	Functional Requirements for Towing Tender for Trailer Fire Pump for Fire Brigade Use	1985	Current	View →
IS 948	Functional Requirements for Water Tender Type 'A' for Fire Brigade Use	1983	Current	View →
IS 949	Emergency (Rescue) Tender - Functional Requirements	2012	Current	View →
IS 950	Functional Requirements for Water Tender, Type B for Fire Brigade Use	2012	Current	View →
IS 952	Fognozzle for Fire Brigade Use - Specification	1986	Current	View →
IS 952	Fognozzle for Fire Brigade Use - Specification	2012	Current	View →
IS 955	Functional Requirements for Dry Powder Tender for Fire Brigade Use	1980	Current	View →
IS 956	Functional Requirements for Rescue Tender for Air Fields	2004	Current	View →
IS 1941	Functional requirements for electric motor sirens, Part 1: ac 3 phase 50 Hz, 415 volts type	2000	Current	View →
IS 2097	Foam Making Branch Pipe and Foam Inductor- Specification	2012	Current	View →
IS 2175	Specification for heat-sensitive fire detectors for use in an automatic fire alarm system	1988	Current	View →
IS 2298	Specification for Single Barrel Stirrup Pump for Fire Fighting Purposes	1977	Current	View →
IS 2696	Functional Requirements for 1 125-1/min Light Fire Engine	1974	Current	View →
IS 2745	Specification for Non-Metal Helmets for Firemen and Civil Defense Personnel	1983	Current	View →
IS 2871	Branch Pipe, Universal For Fire fighting Purpose- Specification	1983	Current	View →
IS 2871	Branch Pipe, Universal For Fire fighting Purpose- Specification	2012	Current	View →
IS 2930	Functional requirements for hose laying tender for fire brigade use	1980	Current	View →
IS 3582	basket strainers for fire fighting purposes (cylindrical type)	1984	Current	View →
IS 3744	Specification hose binding machine	1985	Current	View →
IS 4571	Specification of Aluminium Extension Ladders for Fire Brigade use	1977	Current	View →
IS 4643	Specification for suction wrenches for fire brigade use	1984	Current	View →
IS 4861	Specification for dry powder for fighting fires in burning metals	1984	Current	View →
IS 4862	Specification for portable fire extinguishers for aircraft, Part 1: Halon 1211 Type	2000	Current	View →
IS 4927	Specification for Unlined Flax Canvas Hose for Fire Fighting	1992	Current	View →
IS 4928	delivery valve for centrifugal fire pump outlets	1986	Current	View →
IS 4989	multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires	2000	Current	View →
IS 4989	Foam Concentrate for producing mechanical foam for fire fighting - Specification (Amalgamating IS 4989 (Part 1):1985, (Part 2): 1984, (Part 3):1987	2006	Current	View →
IS 5486	Specification for quick-release knife	1985	Current	View →
IS 5505	Specification for multi-edged rescue axe (non-wedging)	1985	Current	View →
IS 5612	Specification for hose-clamps and hose bandages for fire brigade use, Part 1: Hose-clamps	2000	Current	View →
IS 5612	Specification for hose clamps and hose bandages for fire brigade use, Part 2: Hose bandages	2000	Current	View →
IS 5714	Specification for Hydrant Stand-Pipe for Fire Fighting	1981	Current	View →
IS 5888	Code of practice for design and construction of fire service drill-tower	1970	Current	View →
IS 5896	Code of Practice for Selection, Operation and Maintenance of Special Fire Fighting Appliance, Part I: Combined Foam and Co Crash Tender	2000	Current	View →
IS 5896	Code of practice for selection, operation and maintenance of fire fighting appliances, Part 3: Turntable ladders	2000	Current	View →
IS 6026	Specification - hand-operated sirens	1985	Current	View →
IS 6067	Functional Requirements for Water Tender Type 'X' for Fire Brigade Use	1983	Current	View →
IS 7692	Specification for head forms for testing of helmets	1993	Current	View →
IS 8096	Specification for fire beaters	1992	Current	View →
IS 8149	Functional requirements for twin co2 fire extinguishers (trolley mounted)	1994	Current	View →
IS 8423	Specification for the controlled percolating hose for firefighting	1994	Current	View →
IS 8442	Stand post type water and foam monitor for fire fighting -Specification	2008	Current	View →
IS 9562	Specification for non-metal helmets for the police force	1980	Current	View →
IS 9695	Code of practice for provision and maintenance of water supplies and firefighting	1980	Current	View →
IS 9973	Specification for visors for scooter helmets	1981	Current	View →
IS 9995	Specification for visors for non-metal police and firemen's helmets	1981	Current	View →
IS 10460	Functional requirements for small foam tender for fire brigade use	1983	Current	View →
IS 10658	Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted)	1999	Current	View →
IS 10993	Functional requirements for 2000 kg dry powder tender for fire brigade use	1984	Current	View →
IS 11101	Extended Branch Pipe for Fire Brigade Use	1984	Current	View →
IS 11108	Specification for Portable Fire Extinguishers - Halon 1211 Type	1984	Current	View →
IS 11833	Specification for a dry powder fire extinguisher for metal fires	1986	Current	View →
IS 12717	Functional requirements of fire fighting equipment - High capacity portable pump set (1100-1600 1/min)	1989	Current	View →
IS 12796	Specification for fire rake	1989	Current	View →
IS 12805	Tool Mcleod for fighting forest fires	1989	Current	View →
IS 12835	Design and installation of fixed foam fire extinguishing system - Code of Practice, Part 1: Low expansion foam	2000	Current	View →
IS 12853	Specification of pulaski tool for forest fire	1989	Current	View →
IS 12859	Fire Fighting - Brush Hook for Forest Fires -Specification	1989	Current	View →
IS 12861	Specification for the double-bit axe for forest fire	1989	Current	View →
IS 12862	Specification for fire fighting shovel for forest fires	1989	Current	View →
IS 13385	Specification for fire extinguisher 50-litre capacity wheel mounted water type (Gas Cartridge)	1992	Current	View →
IS 13386	Specification for fire extinguisher 50-litre capacity, mechanical foam type	1992	Current	View →
IS 14933	High-Pressure Fire Fighting Hose -Specification	2001	Current	View →
IS 14951	Fire Extinguisher - 135 Litres Capacity Mechanical Foam Type	2001	Current	View →
IS 15051	High-Pressure Fire Hose Delivery Couplings -Specification	2001	Current	View →
IS 15220	Specification for Halogenated hydrocarbons - halon 1211 and halon 1301 - fire extinguishing media	2002	Current	View →
IS 15221	Safe Handling and Transfer Procedures of Halon 1211 and Halon 1301 (Halogenated Hydrocarbons) - Fire Extinguishing Media	2002	Current	View →
IS 15222	Carbon Dioxide as Fire Extinguishing Media for Fire Protection -Specification	2002	Current	View →
IS 15493	Gaseous Fire Extinguishing Systems - General Requirements	2004	Current	View →
IS 15496	Inspection and Maintenance of Gaseous Fire Extinguishing Systems - Code of Practice	2004	Current	View →
IS 15497	Gaseous Fire Extinguishing Systems - IG 01 Extinguishing Systems	2004	Current	View →
IS 15501	Gaseous Fire Extinguishing Systems - IG 541 Extinguishing Systems	2004	Current	View →
IS 15505	Gaseous Fire Extinguishing Systems - HCFC Blend A Extinguishing Systems	2004	Current	View →
IS 15506	Gaseous Fire Extinguishing Systems - IG 55 Extinguishing Systems	2004	Current	View →
IS 15519	Water mist fire protection systems - Systems design, installation and commissioning - Code of practice	2004	Current	View →
IS 15525	Gaseous Fire Extinguishing Systems - IG 100 Extinguishing Systems	2004	Current	View →
IS 15811	Long-range water-cum-foam monitor with self-inducting, aspirating and non-aspirating jet and spray/fog nozzle forfire fighting -Specification	2008	Current	View →
IS 15821	Gaseous fire extinguishing systems - Physical properties and system design - CF3I extinguishant	2008	Current	View →
IS 15835	Gaseous Fire Extinguishing Systems - HCFC-125 Extinguishing Systems	2009	Current	View →
IS 957	Specification for Control Van for Fire Brigade Use	1967	Current	View →

Water Supply and Plumbing

29 codes

Code	Title	Year	Status
IS 3370 Part 1	Concrete structures for storage of liquids - Part 1: General requirements	2021	Current	View →
IS 3589	Electric Resistance Welded and Submerged Arc Welded Steel Pipes for Water and Sewerage	2020	Current	View →
IS 4985	Unplasticized PVC (uPVC) pipes for potable water supplies - Specification	2021	Current	View →
IS 8329	Centrifugally Cast (Spun) Ductile Iron Pressure Pipes	2020	Current	View →
IS 10500	Drinking water specification (second revision)	2012	Current	View →
IS 12839	Polyethylene water storage tanks (moulded) - Specification	2018	Current	View →
IS 15778	Chlorinated Polyvinyl Chloride (CPVC) pipes for potable water supply - Specification	2023	Current	View →
IS 17429 Part 1	Plumbing services - Code of practice - Part 1: Water supply	2020	Current	View →
IS 17429 Part 2	Plumbing services - Code of practice - Part 2: Drainage and sanitation	2020	Current	View →
IS 779	Copper alloy gate, globe and check valves for waterworks purposes - Specification	1994	Current	View →
IS 780	Sluice valves for waterworks (cast iron or ductile iron body) - Specification	2016	Current	View →
IS 1239 Part 1	Mild steel tubes, tubulars and other wrought steel fittings - Part 1: Mild steel tubes	2004	Current	View →
IS 1239 Part 2	Mild steel tubes, tubulars and other wrought steel fittings - Part 2: Mild steel tubulars and other wrought steel pipe fittings	2004	Current	View →
IS 2556 Part 1	General requirements for water meters - Part 1: Cold water meters (rotary piston type)	1982	Current	View →
IS 3370 Part 2	Concrete structures for storage of liquids - Part 2: Reinforced concrete structures	2021	Current	View →
IS 4984	High density polyethylene (HDPE) pipes for potable water supplies - Specification	2016	Current	View →
IS 8931	Bib taps and stop taps for water services (cast brass, gunmetal) - Specification	2013	Current	View →
IS 10714	Pipe Bedding	2001	Current	View →
IS 11082	Guidelines for water harvesting	1991	Current	View →
IS 11721	Code of practice for plumbing	1995	Superseded	View →
IS 14930 Part 1	Gaskets for use with ASB, CI & DI pipes for water, gas and sewage - Part 1: Elastomeric sealing gaskets (EPDM, NBR) - Specification	2001	Current	View →
IS 15307	Polypropylene (PP) pipes for hot and cold water supplies - Specification	2003	Current	View →
IS 15325	Ductile iron fittings for pressure pipes for water and sewage - Specification	2003	Current	View →
IS 15365	Ductile iron pressure pipes for water and sewage - Specification	2003	Current	View →
IS 16098	Unplasticized Polyvinyl Chloride (uPVC) pipes for drainage systems - Specification	2013	Current	View →
IS 781	Cast iron fittings for pressure pipes for water, gas and sewage - Specification	1986	Current	View →
IS 1536	Centrifugally cast (spun) iron pressure pipes for water, gas and sewage - Specification	1989	Current	View →
IS 6530	Polyethylene fittings for water supply - Specification	1996	Current	View →
IS 14890	General requirements for water supply and drainage systems in buildings	2001	Superseded	View →

Construction Safety and Practices

25 codes

Related:QA/QC Hub PMC Templates

Code	Title	Year	Status
IS 818	Code of Practice for Safety and Health Requirements in Electric and Gas Welding and Cutting Operations	2019	Current	View →
IS 875 Part 3	Design loads for buildings and structures - Part 3: Wind loads	1987	Current	View →
IS 3696 Part 1	Safety rules for scaffolds: Part 1 General requirements	1987	Current	View →
IS 3764	Safety code for excavation work	1992	Current	View →
IS 9668	Provisions for Safety of Workers — Code of Practice	2019	Current	View →
IS 13415	Safety in roof work - Code of practice	1992	Current	View →
IS 13416	Safety in working at heights - Code of practice	1992	Current	View →
IS 14458 Part 1	Personal protective equipment (PPE) - General requirements	1997	Current	View →
IS 16738	Work permits - Code of practice for safety in construction	2018	Current	View →
IS 3016	Code of practice for safety in construction operations	1981	Current	View →
IS 3696 Part 2	Safety rules for scaffolds: Part 2 Specific requirements for different types of scaffolds	1987	Current	View →
IS 4014 Part 1	Code of practice for steel tubular scaffolding: Part 1 Unification of dimensions and general requirements	1967	Current	View →
IS 4014 Part 2	Code of practice for steel tubular scaffolding: Part 2 Safety requirements for scaffolding used in building and civil engineering work	1967	Current	View →
IS 8189	Code of practice for safety in use of cranes, derricks and other hoisting appliances	1976	Current	View →
IS 11623	Safety code for piling operations	1986	Current	View →
IS 12836	Code of practice for safety in handling and storage of building materials	1989	Current	View →
IS 14687	Formwork - Code of practice	1999	Current	View →
IS 15951	Code of practice for safety requirements for temporary access equipment (e.g. suspended scaffolds, mast climbing work platforms)	2011	Current	View →
IS 2770 Part 1	Safety code for tunnelling work: Part 1 Working in rock	1989	Current	View →
IS 2770 Part 2	Safety code for tunnelling work: Part 2 Working in soft ground	1993	Current	View →
IS 4130	Code of practice for demolition of buildings	1991	Current	View →
IS 5916	Code of practice for safety in construction with explosives	1970	Current	View →
IS 10381	Code of practice for safety in construction - General requirements	1982	Current	View →
IS 17296	Safety in confined spaces - Code of practice for construction	2020	Current	View →
IS 7293	Code of practice for electrical safety in construction	1974	Current	View →

Structural Design and Loading

18 codes

Code	Title	Year	Status
IS 875 Part 1	Design Loads (Other than Earthquake) for Buildings and Structures - Dead Loads	1987	Current	View →
IS 875 Part 2	Design Loads (Other than Earthquake) for Buildings and Structures - Imposed Loads	1987	Current	View →
IS 875 Part 3	Design Loads (Other than Earthquake) for Buildings and Structures - Wind Loads	2015	Current	View →
IS 875 Part 5	Design Loads (Other than Earthquake) for Buildings and Structures - Special Loads and Load Combinations	1987	Current	View →
IS 1893 Part 1	Criteria for Earthquake Resistant Design of Structures - General Provisions and Buildings	2016	Current	View →
IS 1905	Code of Practice for Structural Design of Masonry Buildings	2019	Current	View →
IS 4326	Code of Practice for Earthquake Resistant Design and Construction of Buildings - Requirements for Masonry Buildings	1996	Current	View →
IS 13920	Ductile Design and Detailing of Reinforced Concrete Structures Subjected to Seismic Forces - Code of Practice	2016	Current	View →
IS 16700	General Principles of Design for Structures	2017	Current	View →
IS 801	Code of Practice for Use of Cold-Formed Light Gauge Steel Structural Members in General Building Construction	1975	Current	View →
IS 806	Code of Practice for Use of Steel Tubes in General Building Construction	1968	Current	View →
IS 875 Part 4	Design Loads (Other than Earthquake) for Buildings and Structures - Snow Loads	1987	Current	View →
IS 883 Part 1	Code of Practice for Design of Timber Structures - General Provisions	1994	Current	View →
IS 883 Part 2	Code of Practice for Design of Timber Structures - Permissible Stresses	1994	Current	View →
IS 1893 Part 4	Criteria for Earthquake Resistant Design of Structures - Industrial Structures Including Stack-Like Structures	2015	Current	View →
IS 2873	Code of Practice for Design of Joints in Timber Structures	1994	Current	View →
IS 3370 Part 3	Concrete Structures for Storage of Liquids - Prestressed Concrete Structures	2009	Current	View →
IS 3370 Part 4	Concrete Structures for Storage of Liquids - Design Tables	2009	Current	View →

Testing Methods and Quality Control

38 codes

Related:QA/QC Hub (300 templates)

Code	Title	Year	Status
IS 1199 Part 1	Methods of sampling and analysis of concrete - Part 1: Sampling of fresh concrete	1986	Current	View →
IS 1199 Part 7	Methods of sampling and analysis of concrete - Part 7: Determination of the slump	2018	Current	View →
IS 1199 Part 8	Methods of sampling and analysis of concrete - Part 8: Determination of compacting factor	2018	Current	View →
IS 2720 Part 6	Methods of test for soils - Part 6: Determination of liquid and plastic limits	1972	Current	View →
IS 2720 Part 14	Methods of test for soils - Part 14: Determination of density of soil, field method (Sand replacement method)	1968	Current	View →
IS 2720 Part 17	Methods of test for soils - Part 17: Determination of compaction properties (Standard Proctor)	1986	Current	View →
IS 2720 Part 18	Methods of test for soils - Part 18: Determination of compaction properties (Modified Proctor)	1987	Current	View →
IRC SP 99	Manual for Expression of Uncertainty in Measurements in Highway Material Testing	2013	Current	View →
IS 228	Methods for Chemical Analysis of Steels	2018	Current	View →
IS 516 Part 2	Methods of tests for strength of concrete - Part 2: Determination of flexural strength	1959	Current	View →
IS 516 Part 3	Methods of tests for strength of concrete - Part 3: Determination of split tensile strength	1959	Current	View →
IS 516 Part 5/Sec 3	Methods of tests for strength of concrete - Part 5: Non-destructive testing of hardened concrete - Section 3: Rebound Hammer	2022	Current	View →
IS 516 Part 5/Sec 4	Methods of tests for strength of concrete - Part 5: Non-destructive testing of hardened concrete - Section 4: Ultrasonic Pulse Velocity	2022	Current	View →
IS 516 Part 6	Methods of tests for strength of concrete - Part 6: Core testing of hardened concrete	2022	Current	View →
IS 638	Sheet Rubber (Natural and Synthetic)	2005	Current	View →
IS 1070	Reagent Grade Water	1992	Current	View →
IS 1182	Recommended Practice for Radiographic Examination of Fusion Welded Butt Joints in Steel Plates	2014	Current	View →
IS 1387	General Requirements for Supply of Metallic Materials	1993	Current	View →
IS 1500	Method for Brinell Hardness Test for Metallic Materials	2019	Current	View →
IS 1501	Method for Vickers Hardness Test for Metallic Materials	2019	Current	View →
IS 1586	Method for Rockwell Hardness Test for Metallic Materials	2019	Current	View →
IS 1956	Indian Standard Code for Letter Symbols for Quantities and Units	2001	Current	View →
IS 2102	General Tolerances for Dimensions and Geometrical Tolerances for Machined Parts	2018	Current	View →
IS 2296	Temperature Measurement in Industry	2001	Current	View →
IS 2500	Sampling Inspection Procedures — Part 1: Attribute Sampling Plans Indexed by AQL	2017	Current	View →
IS 3558	Method of test for water for concrete	1983	Current	View →
IS 4905	Methods for Random Sampling	1968	Current	View →
IS 6746	Method for Measurement of Coating Thickness by Magnetic Method (Non-Destructive)	2003	Current	View →
IS 8910	General Requirements for Liquid Penetrant Testing	2019	Current	View →
IS 1264	Safety Matches	2019	Current	View →
IS 1528	Methods of Sampling and Testing of Refractory Materials	2018	Current	View →
IS 1817	Methods of Test for Coating Thickness on Non-Magnetic Substrates	2016	Current	View →
IS 2633	Methods for Testing Electroplated Coatings	2002	Current	View →
IS 2720 Part 12	Methods of test for soils - Part 12: Determination of shear strength parameters of soil by triaxial compression test (Undrained conditions)	1981	Current	View →
IS 3400	Methods of Test for Vulcanized Rubbers	2013	Current	View →
IS 6461 Part 5	Methods of test for hydraulic cement - Part 5: Determination of standard consistency	1972	Current	View →
IS 6461 Part 6	Methods of test for hydraulic cement - Part 6: Determination of setting times	1972	Current	View →
IS 6461 Part 7	Methods of test for hydraulic cement - Part 7: Determination of soundness	1972	Current	View →

Bridges and Bridge Engineering

48 codes

Related:IRC Codes Hub

Code	Title	Year	Status
IRC 5	Standard Specifications and Code of Practice for Road Bridges — General Features of Design	2015	Current	View →
IRC 6	Standard Specifications and Code of Practice for Road Bridges — Loads and Load Combinations	2017	Current	View →
IRC 78	Standard Specifications and Code of Practice for Road Bridges — Foundations and Substructure	2014	Current	View →
IRC 112	Code of Practice for Design of Reinforced Concrete Bridges and Culverts	2020	Current	View →
IS 2062	Steel for Structural Use - Specification	1999	Superseded	View →
IS 2911 Part 2	Design and Construction of Pile Foundations - Concrete Piles	2021	Current	View →
IRC 7	Standard Specifications and Code of Practice for Road Bridges — Foundations and Substructure — Wearing Coat	2017	Current	View →
IRC SP 13	Guidelines for Design of Small Bridges and Culverts	2004	Current	View →
IRC SP 17	Recommendations on Construction and Maintenance of Approaches to Bridges	2019	Current	View →
IRC 18	Design Criteria for Prestressed Concrete Road Bridges (Post-Tensioned)	2000	Current	View →
IRC 19	Standard Specifications and Code of Practice for Road Bridges — Cement Concrete (Hinge and Expansion Joints)	2005	Current	View →
IRC 22	Standard Specifications and Code of Practice for Road Bridges — Composite Construction	2008	Current	View →
IRC 24	Standard Specifications and Code of Practice for Road Bridges — Steel Road Bridges	2010	Current	View →
IRC SP 37	Guidelines for Evaluation of Load Carrying Capacity of Bridges	2010	Current	View →
IRC 40	Standard Specifications and Code of Practice for Road Bridges — Cement Mortar and Concrete	2002	Current	View →
IRC 45	Estimation of Resistance of Soil Below Maximum Scour Level — Foundations of Road Bridges	1972	Current	View →
IRC 47	Guidelines for Fatigue Design of Highway Structures	2018	Current	View →
IRC SP 51	Guidelines for Load Testing of Bridges	2015	Current	View →
IRC SP 54	Project Preparation Manual for Bridges	2000	Current	View →
IRC SP 56	Guidelines for Steel Pedestrian Bridges	2014	Current	View →
IRC SP 57	Guidelines for Quality Systems for Road Bridges	2015	Current	View →
IRC SP 65	Guidelines for Design and Construction of Segmental Bridges	2005	Current	View →
IRC SP 66	Guidelines for Design of Continuous Bridges	2016	Current	View →
IRC SP 74	Guidelines for Repair and Rehabilitation of Steel Bridges	2007	Current	View →
IRC SP 77	Manual on Design of Expansion Joints for Road Bridges	2008	Current	View →
IRC SP 80	Guidelines for Corrosion Prevention, Monitoring and Remedial Measures for Concrete Bridge Structures	2008	Current	View →
IRC 83	Code of Practice for Road Bridge Foundations — Direct Foundations	2018	Current	View →
IRC SP 85	Guidelines for Inspection and Maintenance of Bridges	2019	Current	View →
IS 2911 Part 4	Design and Construction of Pile Foundations - Testing of Piles	2013	Current	View →
IS 6623	High Strength Structural Nuts - Specification	1972	Current	View →
IS 15005	Strip Seal Expansion Joints for Bridges - Specification	2022	Current	View →
IS 15005	Strip Seal Expansion Joints for Bridges - Specification	2001	Superseded	View →
IRC 21	Standard Specifications and Code of Practice for Road Bridges — Cement Concrete (Plain and Reinforced)	2000	Superseded	View →
IS 1893 Part 6	Criteria for Earthquake Resistant Design of Structures - Bridges	2022	Current	View →
IS 2090	Design of Bearings for Bridges - Code of Practice	2018	Current	View →
IS 2090	Code of Practice for Design of Bearings for Bridges	1983	Superseded	View →
IS 3955	Code of Practice for Design and Construction of Well Foundations	1967	Current	View →
IS 4651 Part 1	Loads for Railway Bridges: General Features	2008	Current	View →
IS 4651 Part 2	Loads for Railway Bridges: Detailed Provisions	2008	Current	View →
IS 4651 Part 3	Loads for Railway Bridges: Steel Railway Bridges	2008	Current	View →
IS 6649	High Strength Structural Washers - Specification	1980	Current	View →
IS 12891	Elastomeric Bearings for Bridges - Specification	2018	Current	View →
IS 12891	Elastomeric Bearings for Bridges - Specification	1990	Superseded	View →
IS 12892	Pot Bearings for Bridges - Specification	2018	Current	View →
IS 12892	Pot Bearings for Bridges - Specification	1990	Superseded	View →
IS 15006	Modular Expansion Joints for Bridges - Specification	2022	Current	View →
IS 15006	Modular Expansion Joints for Bridges - Specification	2001	Superseded	View →
IS 16644	Spherical and Cylindrical Bearings for Bridges - Specification	2018	Current	View →

Solar and Renewable Energy Installations

18 codes

Code	Title	Year	Status
IS 14285	Photovoltaic (PV) module safety qualification	2018	Current	View →
IS 16170 Part 1	Photovoltaic (PV) modules - Design qualification and type approval - Part 1: PV modules	2016	Current	View →
IS 16300	Photovoltaic (PV) modules for power generation - General requirements and methods of test	2016	Current	View →
IS 16301	Grid interconnection of photovoltaic (PV) systems	2016	Current	View →
IS 16302	Photovoltaic (PV) systems - Evaluation of performance	2016	Current	View →
IS 16569	Solar water heating systems with evacuated tube collectors - General requirements and methods of test	2016	Current	View →
IS/IEC 61400 Part 1	Wind turbines - Part 1: Design requirements	2005	Current	View →
IS 2911 Part 1	Design and installation of piled foundations - Part 1: Concrete piles	2010	Current	View →
IS 2911 Part 3	Design and installation of piled foundations - Part 3: Under-reamed piles	2010	Current	View →
IS 5216	Guide for safety procedures and practices in electrical work	1982	Current	View →
IS 15651	Solar PV lighting systems - Specification	2006	Current	View →
IS 16299	Charge controllers for standalone PV systems - Minimum performance requirements	2016	Current	View →
IS 16365	Solar Photovoltaic (SPV) pumping systems - Specification	2016	Current	View →
IS 12933 Part 1	Solar water heating systems - Part 1: Requirements	2003	Current	View →
IS 12933 Part 2	Solar water heating systems - Part 2: Method of test for thermal performance	2003	Current	View →
IS 16279 Part 1	Inverters for Grid-connected Photovoltaic (PV) Systems - Test procedure - Part 1: Utility Interconnected Photovoltaic Inverters	2015	Current	View →
IS 16298	Secondary batteries for renewable energy applications - General requirements and methods of test	2016	Current	View →
IS 16568	Evacuated tube solar collectors - General requirements and methods of test	2016	Current	View →

Lifts, Escalators and Mechanical Handling

26 codes

Code	Title	Year	Status
IS 14665 Part 1	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts — Part 1: Passenger and Goods Lifts	1999	Superseded	View →
IS 14665 Part 2/Sec 1	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts — Part 2: Constructional and Installation Requirements, Section 1: General Provisions	1999	Superseded	View →
IS 14665 Part 2/Sec 2	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts — Part 2: Constructional and Installation Requirements, Section 2: Lift Well, Pit and Headroom	1999	Superseded	View →
IS 14665 Part 2/Sec 3	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts — Part 2: Constructional and Installation Requirements, Section 3: Machine Room and Pulley Room	1999	Superseded	View →
IS 14665 Part 2/Sec 4	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts — Part 2: Constructional and Installation Requirements, Section 4: Doors and Gates	1999	Superseded	View →
IS 17464 Part 1	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Examination and Tests — Part 1: Type Examination Tests	2020	Current	View →
IS 17464 Part 2	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Examination and Tests — Part 2: Periodic Examinations and Tests	2020	Current	View →
IS 14666	Guide Rails for Lifts	1999	Current	View →
IS 3534 Part 1	Wire Ropes for Lifts — Part 1: Minimum Requirements	2010	Current	View →
IS 3534 Part 2	Wire Ropes for Lifts — Part 2: Methods of Test	2010	Current	View →
IS 14667	Buffers for Lifts	1999	Current	View →
IS 14668	Safety Gears for Lifts	1999	Current	View →
IS 14669	Overspeed Governors for Lifts	1999	Current	View →
IS 14670	Landing Doors and Car Doors for Lifts — Fire Resistance Tests	1999	Current	View →
IS 15729 Part 1	Lifts for Persons with Impaired Mobility — Safety, Dimensions and Functional Operation — Part 1: Vertical Lifting Platforms	2007	Current	View →
IS 15729 Part 2	Lifts for Persons with Impaired Mobility — Safety, Dimensions and Functional Operation — Part 2: Inclined Lifting Platforms	2007	Current	View →
IS 17462 Part 1	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 1: Electric Lifts	2020	Current	View →
IS 17462 Part 2	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 2: Hydraulic Lifts	2020	Current	View →
IS 17462 Part 5	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 5: Design Rules, Calculations, Examinations and Tests of Lift Components	2020	Current	View →
IS 17462 Part 7	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 7: Firefighters Lifts	2020	Current	View →
IS 17462 Part 8	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 8: Vandal Resistant Lifts	2020	Current	View →
IS 17462 Part 9	Safety Rules for the Construction and Installation of Lifts — Lifts for the Transport of Persons and Goods — Part 9: Evacuation Lifts for Disabled Persons	2020	Current	View →
IS 17900 Part 1	Safety Rules for the Construction and Installation of Escalators and Moving Walkways — Part 1: Construction and Installation	2022	Current	View →
IS 17900 Part 2	Safety Rules for the Construction and Installation of Escalators and Moving Walkways — Part 2: Rules for the Improvement of Safety of Existing Escalators and Moving Walkways	2022	Current	View →
IS 1860	Code of Practice for Installation, Operation and Maintenance of Electric Passenger and Goods Lifts	1980	Superseded	View →
IS 4666	Specification for Electric Lifts	1990	Superseded	View →

Steel and Reinforcement

55 codes

Code	Title	Year	Status
IS 800	General Construction in Steel - Code of Practice	2007	Current	View →
IS 808	Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections	1989	Current	View →
IS 816	Code of Practice for Use of Metal Arc Welding for General Construction in Mild Steel	1969	Current	View →
IS 1786	High Strength Deformed Steel Bars and Wires for Concrete Reinforcement - Specification	2008	Current	View →
IS 2062	Hot Rolled Medium and High Tensile Structural Steel - Specification	2011	Current	View →
IS 210	Grey Iron Castings	2009	Current	View →
IS 277	Galvanized Steel Sheets (Plain and Corrugated)	2018	Current	View →
IS 513	Cold Rolled Low Carbon Steel Sheets and Strips	2018	Current	View →
IS 813	Scheme of Symbols for Arc Welding	1986	Current	View →
IS 814 Part 1	Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steels - Part 1: For Welding of Steels Other Than Creep Resisting Steels	2004	Current	View →
IS 1030	Carbon Steel Castings for General Engineering Purposes	2018	Current	View →
IS 1079	Hot Rolled Carbon Steel Sheets and Strips	2017	Current	View →
IS 1161	Steel Tubes for Structural Purposes - Specification	2014	Current	View →
IS 1363 Part 1	Hexagon Head Bolts, Screws and Nuts of Product Grade C - Part 1: Hexagon Head Bolts (Size Range M 5 to M 64)	2002	Current	View →
IS 1364 Part 1	Hexagon Head Bolts, Screws and Nuts of Product Grade A and B - Part 1: Hexagon Head Bolts (Size Range 1.6 mm to 64 mm)	2017	Current	View →
IS 1367 Part 3	Technical Supply Conditions for Threaded Steel Fasteners - Part 3: Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Bolts, Screws and Studs	2002	Current	View →
IS 1367 Part 5	Technical Supply Conditions for Threaded Steel Fasteners - Part 5: Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Nuts with Specified Proof Load Values	2002	Current	View →
IS 1570	Schedules for Wrought Steels	2017	Current	View →
IS 1587	Metallic Materials - Brinell Hardness Test	1993	Current	View →
IS 1599	Metallic Materials - Bend and Re-Bend Test for Steel Products	2019	Current	View →
IS 1608 Part 1	Mechanical Testing of Metals - Tensile Testing - Part 1: Method of Test at Room Temperature	2005	Current	View →
IS 1730 Part 1	Dimensions for Steel Flats - Part 1: Rolled Steel Flats	1989	Current	View →
IS 1732	Dimensions for Round and Square Steel Bars for Structural and General Engineering Purposes	1989	Current	View →
IS 1757	Methods of Charpy Impact Test for Metallic Materials	1988	Current	View →
IS 1852	Rolling and Cutting Tolerances for Hot Rolled Steel Products	1985	Current	View →
IS 1865	Ductile Iron Castings for General Engineering Purposes	2018	Current	View →
IS 2266	Steel Wire Ropes for General Engineering Purposes	2019	Current	View →
IS 2502	Code of Practice for Bending and Fixing of Bars for Concrete Reinforcement	1969	Current	View →
IS 3757	High Strength Structural Bolts	1985	Current	View →
IS 4827	Dimensions of Welding Electrodes	2018	Current	View →
IS 4923	Hollow Steel Sections for Structural Use - Specification	1997	Current	View →
IS 6603	Stainless Steel Bars and Flats	2001	Current	View →
IS 7307 Part 1	Radiographic Examination of Fusion Welded Butt Joints in Steel Plates - Part 1: Method for Test	1974	Current	View →
IS 9595	Recommendations for Metal Arc Welding of Carbon and Carbon Manganese Steels	1992	Current	View →
IS 10148	Hot Rolled Steel Strip for Welded Tubes and Pipes	2019	Current	View →
IS 16088	Welded Plain and Deformed Steel Wire Fabric for Concrete Reinforcement - Specification	2013	Current	View →
IS 196	Atmospheric Corrosion Resistant Steel for Structural Purposes	2016	Current	View →
IS 226	Structural Steel (Standard Quality)	1975	Superseded	View →
IS 334	Glossary of Terms Relating to Iron and Steel	2002	Current	View →
IS 723	Steel Bars and Rods for Pattern Making	2019	Current	View →
IS 812	Method for Coding of Covered Electrodes for Manual Metal Arc Welding	1957	Current	View →
IS 1148	Hot Rolled Carbon Steel Wire Rods for the Manufacture of Metal Arc Welding Electrodes	2021	Current	View →
IS 1538	Hardened and Tempered Carbon Steel Wire for Springs	2018	Current	View →
IS 1977	Structural Steel (Ordinary Quality)	2018	Current	View →
IS 1998	Low and Medium Carbon Steel Wire for Wire Drawing	2019	Current	View →
IS 2490	Steel Castings for General Engineering Purposes	2018	Current	View →
IS 3306	Pig Iron — Specification	2018	Current	View →
IS 3588	Electrode Quality Steel Billets and Blooms	2019	Current	View →
IS 3600 Part 1	Methods of Testing of Fusion Welded Joints and Weld Metal - Part 1: Tensile Testing of Butt Welds	1982	Current	View →
IS 4454	Stainless Steel Wire for Springs	2018	Current	View →
IS 4826	Hot Rolled Carbon Steel Sheet and Strip with Specified Minimum Yield Strength	1979	Current	View →
IS 7215	Code of Practice for Structural Use of Cold-Formed Light Gauge Steel Members	1974	Current	View →
IS 7280	Filler Rods and Wires for Gas Welding of Steel	1974	Current	View →
IS 10243 Part 1	Acceptance Levels for Discontinuities in Welds - Part 1: Radiographic Examination	1982	Current	View →
IS 432 Part 1	Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement - Part 1: Mild Steel and Medium Tensile Steel Bars	1982	Current	View →

Building Planning and Design

15 codes

Code	Title	Year	Status
IS 1172	Code of basic requirements for water supply, drainage and sanitation	1993	Current	View →
IS 1642 Part 2	Code of practice for fire safety of buildings (Part 2: Details of construction)	1989	Current	View →
IS 1644 Part 4	Code of practice for fire safety of buildings (Part 4: Exit requirements and personal hazard)	1989	Current	View →
IS 1904	Code of practice for design and construction of foundations in soils (General requirements)	1986	Current	View →
IS 2189	Code of practice for selection, installation and maintenance of automatic fire detection and alarm system	2006	Current	View →
IS 4963	Guidelines for Accessibility in Built Environment	2019	Current	View →
IS 1443	Code of practice for construction of masonry structures	1992	Current	View →
IS 1641	Code of practice for fire safety of buildings (General: General principles of fire grading and classification)	1988	Current	View →
IS 2527 Part 1	Code of practice for plumbing services for buildings (Part 1: General requirements)	1984	Current	View →
IS 2911	Design and Construction of Pile Foundations - Code of Practice	2010	Current	View →
IS 3414	Code of practice for design and installation of hot and cold water installations in buildings	1986	Current	View →
IS 3801	Code of practice for installation of lifts and escalators	1986	Current	View →
IS 6272	Code of practice for ventilation of residential buildings	1971	Current	View →
IS 3362	Code of practice for natural ventilation of public buildings	1977	Current	View →
IS 7779	Code of practice for selection, installation and maintenance of fire fighting pumps	1975	Current	View →

Masonry and Bricks

22 codes

Related:Material Estimator Prices

Code	Title	Year	Status
IS 1077	Common Burnt Clay Building Bricks - Specification	1992	Current	View →
IS 1905	Code of Practice for Structural Safety of Buildings - Masonry Buildings	1987	Current	View →
IS 2185 Part 1	Concrete Masonry Units - Specifications: Part 1 Hollow and solid concrete blocks	2005	Current	View →
IS 3495 Part 1	Methods of Tests of Burnt Clay Building Bricks: Part 1 Determination of compressive strength	1992	Current	View →
IS 4326	Code of practice for earthquake resistant design and construction of buildings: Masonry buildings	1976	Superseded	View →
IS 2185 Part 2	Concrete Masonry Units - Specifications: Part 2 Lightweight concrete blocks	1999	Current	View →
IS 2212	Code of Practice for Load-bearing Brickwork	1991	Current	View →
IS 2250	Code of Practice for Preparation and Use of Masonry Mortars	1981	Current	View →
IS 3025	Code of Practice for Use of Water in Concrete and Masonry	1993	Current	View →
IS 3102	Classification of Burnt Clay Solid Bricks	1971	Current	View →
IS 3495 Part 2	Methods of Tests of Burnt Clay Building Bricks: Part 2 Determination of water absorption	1992	Current	View →
IS 3495 Part 3	Methods of Tests of Burnt Clay Building Bricks: Part 3 Determination of efflorescence	1992	Current	View →
IS 3495 Part 4	Methods of Tests of Burnt Clay Building Bricks: Part 4 Determination of warpage	1992	Current	View →
IS 4860	Facing Bricks - Specification	1991	Current	View →
IS 6441 Part 2	Autoclaved Cellular Concrete Blocks for Masonry - Part 2: Code of practice for use of AAC blocks	1997	Current	View →
IS 12894	Pulverized Fuel Ash - Lime Bricks - Specification	2002	Current	View →
IS 16215	Masonry Mortars - Specifications and Methods of Test	2014	Current	View →
IS 712	Building Limes - Specification	1984	Current	View →
IS 2180	Heavy Duty Burnt Clay Building Bricks - Specification	1988	Current	View →
IS 6441 Part 1	Autoclaved Cellular Concrete Blocks for Masonry - Part 1: Specifications	1998	Current	View →
IS 13828	Improving Earthquake Resistance of Low Strength Masonry Buildings - Guidelines	1993	Current	View →
IS 13829 Part 1	Earthquake Resistant Design and Construction of Buildings - Guidelines: Part 1 Unreinforced Masonry Buildings	1993	Current	View →

HVAC and Air Conditioning

27 codes

Code	Title	Year	Status
IS 655	Code of Practice for Mechanical Ventilation and Air Conditioning of Buildings	2018	Current	View →
IS 1646	Fire Safety of Buildings - General: Electrical Installations - Code of Practice	2020	Current	View →
IS 2379	Method for Estimation of Thermal Conductivity of Materials	1977	Current	View →
IS 11210	Design, Fabrication and Installation of Ducts for Air Conditioning and Ventilation Systems - Specification	2018	Current	View →
IS 660	Safety Code for Mechanical Refrigeration	1993	Current	View →
IS 1391	Room Air Conditioners	2018	Current	View →
IS 1644	Fire Safety of Buildings - General: Air Conditioning - Code of Practice	2011	Current	View →
IS 3139	Fans and Blowers - Specification	2018	Current	View →
IS 3346	Thermal Insulation of Buildings - Code of Practice	2018	Current	View →
IS 6760	Specification for Rubber Hoses for LPG	2018	Current	View →
IS 8148	Packaged Air Conditioners - Specification	2018	Current	View →
IS 8225	Room Air Conditioners - Specification	2018	Current	View →
IS 9428	Expanded Polystyrene (EPS) for Thermal Insulation - Specification	2018	Current	View →
IS 12400 Part 1	Thermal Insulating Materials - Mineral Wool - Blanket Type - Specification	2018	Current	View →
IS 12400 Part 2	Thermal Insulating Materials - Mineral Wool - Board Type - Specification	2018	Current	View →
IS 12400 Part 3	Thermal Insulating Materials - Mineral Wool - Pipe Section Type - Specification	2018	Current	View →
IS 12437	Chilled Water Distribution Systems - Code of Practice for Design and Installation	2018	Current	View →
IS 13913	Fire Dampers and Smoke Dampers for Air Distribution Systems - Specification	1993	Current	View →
IS 14227	Rigid Polyurethane (PUR) and Polyisocyanurate (PIR) Foam for Thermal Insulation - Specification	2018	Current	View →
IS 15000	Chillers - Specification	2018	Current	View →
IS 3137	Industrial Ventilation - Code of Practice	2018	Current	View →
IS 3141	Centrifugal Fans - Specification	2018	Current	View →
IS 4251	Treatment of Water for Cooling Systems - Code of Practice	2018	Current	View →
IS 9008 Part 1	Energy Performance of Buildings - Part 1: General Requirements for HVAC Systems	2019	Current	View →
IS 9008 Part 3	Energy Performance of Buildings - Part 3: Ventilation	2019	Current	View →
IS 11360	Reciprocating Compressors for Refrigerants - Specification	1985	Current	View →
IS 13723	Cooling Towers - Method of Test	2018	Current	View →

Cement

33 codes

Related:Prices Material Estimator

Code	Title	Year	Status
IS 269	Ordinary Portland Cement - Specification	2015	Current	View →
IS 1489 Part 1	Portland-Pozzolana Cement - Specification - Part 1: Fly Ash Based	2015	Current	View →
IS 4031 Part 4	Methods of Physical Tests for Hydraulic Cement - Part 4: Determination of setting time	1988	Current	View →
IS 4031 Part 5	Methods of Physical Tests for Hydraulic Cement - Part 5: Determination of compressive strength	1988	Current	View →
IS 455	Portland Slag Cement - Specification	2015	Current	View →
IS 1489 Part 2	Portland-Pozzolana Cement - Specification - Part 2: Calcined Clay Based	2015	Current	View →
IS 1727	Methods of Test for Pozzolanic Materials	2004	Current	View →
IS 3812 Part 1	Pulverized Fuel Ash - Specification - Part 1: For use as pozzolana in cement, cement mortar and concrete	2013	Current	View →
IS 4031 Part 1	Methods of Physical Tests for Hydraulic Cement - Part 1: Determination of fineness by dry sieving	1996	Current	View →
IS 4031 Part 2	Methods of Physical Tests for Hydraulic Cement - Part 2: Determination of fineness by Blaine air permeability method	1996	Current	View →
IS 4031 Part 3	Methods of Physical Tests for Hydraulic Cement - Part 3: Determination of consistency of standard cement paste	1988	Current	View →
IS 4031 Part 6	Methods of Physical Tests for Hydraulic Cement - Part 6: Determination of specific gravity	1988	Current	View →
IS 4031 Part 7	Methods of Physical Tests for Hydraulic Cement - Part 7: Determination of soundness by Le Chatelier method	1988	Current	View →
IS 4031 Part 11	Methods of Physical Tests for Hydraulic Cement - Part 11: Determination of density	1988	Current	View →
IS 8112	Ordinary Portland Cement, 43 Grade - Specification	1989	Superseded	View →
IS 12269	Ordinary Portland Cement, 53 Grade - Specification	1987	Superseded	View →
IS 16715	Ground Granulated Blastfurnace Slag for use in Cement, Mortar and Concrete - Specification	2018	Current	View →
IS 1344	Masonry Cement - Specification	1981	Current	View →
IS 3530	Methods of Sampling Hydraulic Cement	1989	Current	View →
IS 4031 Part 8	Methods of Physical Tests for Hydraulic Cement - Part 8: Determination of soundness by autoclave method	1988	Current	View →
IS 4031 Part 9	Methods of Physical Tests for Hydraulic Cement - Part 9: Determination of drying shrinkage	1988	Current	View →
IS 4031 Part 10	Methods of Physical Tests for Hydraulic Cement - Part 10: Determination of heat of hydration	1988	Current	View →
IS 4032	Methods of Chemical Analysis of Hydraulic Cement	1985	Current	View →
IS 5047	Integrated Cement Plants — Portland Cement Specification	2018	Current	View →
IS 6909	Super Sulphated Cement - Specification	1990	Current	View →
IS 7328	High Alumina Cement	2008	Current	View →
IS 8041	Rapid Hardening Portland Cement - Specification	1990	Current	View →
IS 8043	Hydrophobic Cement - Specification	1991	Current	View →
IS 8047	Low Heat Portland Cement - Specification	1989	Current	View →
IS 9000	Mini Cement Plants — Specification	2018	Current	View →
IS 12330	Sulphate Resisting Portland Cement - Specification	1988	Current	View →
IS 15388	Silica Fume - Specification	2003	Current	View →
IS 269	Ordinary Portland Cement, 33 Grade - Specification	1989	Superseded	View →

Green Building and Sustainability

22 codes

Code	Title	Year	Status
IS 1489 Part 1	Portland pozzolana cement - Part 1: Fly ash based - Specification	2023	Current	View →
IS 2065	Code of practice for water supply, plumbing and drainage	1983	Current	View →
IS 3812 Part 1	Pulverized fuel ash - Specification - Part 1: For use in cement, cement mortar and concrete	2023	Current	View →
IS 3812 Part 2	Pulverized fuel ash - Specification - Part 2: For use as admixture in cement mortar and concrete	2023	Current	View →
IS 14900	Glass for glazing and paneling - Specification	2001	Current	View →
IS 15792	Code of Practice for Artificial Recharge to Groundwater using Rainwater Harvesting	2007	Current	View →
IS 15998	Rainwater Harvesting Systems - Guidelines	2011	Current	View →
IS 16016	Code of Practice for Installation of Rainwater Harvesting Systems in Buildings	2012	Current	View →
IS 16017	Rainwater Harvesting - Storage Systems - Code of Practice	2012	Current	View →
IS 16183	Water efficient plumbing products - Specification	2014	Current	View →
IS 16352	Energy Conservation in Buildings - Guidelines for	2015	Current	View →
IS 16429	Energy efficiency requirements for buildings - code of practice	2016	Current	View →
IS 17006	Energy Audits for Buildings – Code of Practice	2018	Current	View →
IS 17267	Greywater recycling systems - Code of practice	2019	Current	View →
IS 3792	Guide for estimation of thermal performance of buildings by calculation	1978	Current	View →
IS 12818	Guidelines for design of solar passive buildings	1990	Current	View →
IS 13192	Code of practice for design and installation of solar water heating systems	1991	Current	View →
IS 16279	Energy performance of buildings - calculation of energy demand for heating and cooling - general criteria	2015	Current	View →
IS 16389	Guidelines for use of demolished concrete and masonry waste as recycled aggregate in concrete	2015	Current	View →
IS 16734	Eco-labelling of building materials - General requirements	2018	Current	View →
IS 17208	Guidelines for use of Geopolymers in Concrete	2019	Current	View →
IS 17268	Blackwater treatment systems - Code of practice	2019	Current	View →

Swimming Pools and Sports Facilities

20 codes

Code	Title	Year	Status
IS 3370 Part 1	Concrete Structures for Storage of Liquids - Code of Practice - General Requirements	2009	Current	View →
IS 4985	Unplasticized PVC Pipes for Potable Water Supplies - Specification	1994	Current	View →
IS 15886	Safety Requirements for Playground Equipment	2009	Current	View →
IS 1646	Code of Practice for Fire Safety of Buildings (General)	1982	Current	View →
IS 2502	Code of Practice for Detailing of Reinforced Concrete	1963	Current	View →
IS 3370 Part 2	Concrete Structures for Storage of Liquids - Code of Practice - Reinforced Concrete Structures	2009	Current	View →
IS 17260	Specification for Water Quality of Swimming Pools and Similar Amenities	2018	Current	View →
IS 2065	Code of Practice for Plumbing Services	1996	Current	View →
IS 3370 Part 4	Concrete Structures for Storage of Liquids - Code of Practice - Design Tables	1967	Current	View →
IS 5219	Specification for Diving Boards	1982	Current	View →
IS 9091	Code of Practice for Interior Lighting of Buildings	1993	Current	View →
IS 10987 Part 1	Playground Equipment - General Safety Requirements and Test Methods	2003	Current	View →
IS 10987 Part 2	Playground Equipment - Additional Specific Safety Requirements and Test Methods for Swings	2003	Current	View →
IS 13715	Acoustics - Code of Practice for Sound Insulation of Buildings	1993	Current	View →
IS 15306	Ceramic Tiles for Swimming Pools - Specification	2002	Current	View →
IS 15993	Code of Practice for Design of Accessible Built Environment	2013	Current	View →
IS 16701	Guidelines for Safe Playgrounds	2018	Current	View →
IS 16704	Performance Requirements for Precast Concrete Products	2018	Current	View →
IS 16740	Synthetic Sports Surfaces - General Requirements and Test Methods for Indoor and Outdoor Sports Facilities	2018	Current	View →
IS 17094 Part 1	Synthetic Sports Surfaces - Specific Requirements for Tennis Courts	2019	Current	View →

Disaster Resilience and Retrofitting

26 codes

Related:Handbook (Seismic Zones)

Code	Title	Year	Status
IS 1893 Part 1	Criteria for Earthquake Resistant Design of Structures - General Provisions and Buildings	2002	Superseded	View →
IS 1893 Part 3	Criteria for Earthquake Resistant Design of Structures - Bridges and Retaining Walls	2014	Current	View →
IS 13920	Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces - Code of Practice	1993	Superseded	View →
IS 15294	Ductile Detailing of Steel Structures Subjected to Seismic Forces - Code of Practice	2003	Current	View →
IS 16000	Repair and Rehabilitation of Structures - General Guidelines	2014	Current	View →
IS 1893 Part 2	Criteria for Earthquake Resistant Design of Structures - Liquid Retaining Tanks - Elevated and Ground Supported	2014	Current	View →
IS 1893 Part 4	Criteria for Earthquake Resistant Design of Structures - Industrial Structures Including Stack Like Structures	2014	Current	View →
IS 1893 Part 5	Criteria for Earthquake Resistant Design of Structures - Dams and Embankments	2016	Current	View →
IS 4998 Part 1	Guidelines for Cyclone Resistant Design and Construction of Buildings - General	1992	Current	View →
IS 4998 Part 2	Guidelines for Cyclone Resistant Design and Construction of Buildings - Constructional Details	1992	Current	View →
IS 12844	Guidelines for Selection of Site and Design of Housing in Coastal Regions	1989	Current	View →
IS 13827	Improving Earthquake Resistance of Earthen Buildings - Guidelines	1993	Current	View →
IS 13829	Improving Earthquake Resistance of Stone Masonry Buildings - Guidelines	1993	Current	View →
IS 13830	Improving Earthquake Resistance of Timber Buildings - Guidelines	1994	Current	View →
IS 14264	Guidelines for Design and Construction of Structures in High Wind and Flood Prone Areas	1995	Current	View →
IS 15498	Cyclone Resistant Design and Construction of Composite Structures - Code of Practice	2004	Current	View →
IS 15690	Flood Resistant Design and Construction of Buildings - Guidelines	2006	Current	View →
IS 15988	Seismic Evaluation and Strengthening of Existing Reinforced Concrete Buildings - Guidelines	2013	Current	View →
IS 16298	Repair and Rehabilitation of Concrete Structures - Methods and Materials	2014	Current	View →
IS 16302	Structural Health Monitoring of Existing Buildings - Guidelines	2014	Current	View →
IS 16310	Use of Fibre Reinforced Polymer (FRP) Composites for Strengthening of Concrete Structures - Guidelines	2015	Current	View →
IS 16447	Cyclone Resistant Design and Construction of Buildings Using Reinforced Concrete - Guidelines	2016	Current	View →
IS 16448	Cyclone Resistant Design and Construction of Buildings Using Pre-Engineered Steel Structures - Guidelines	2016	Current	View →
IS 16474	Flood Resistant Construction - Guidelines for Non-engineered Buildings	2016	Current	View →
IS 16475	Flood Resistant Construction - Guidelines for Engineered Buildings	2016	Current	View →
IS 18881	Seismic Design of Buildings Using Base Isolation - Code of Practice	2018	Current	View →

BIM and Digital Construction

13 codes

Related:BIM Hub

Code	Title	Year	Status
ISO 16739-1	Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema	2024	Current	View →
ISO 19650-1	Organization and digitization of information about buildings and civil engineering works, including BIM — Information management using BIM — Part 1: Concepts and principles	2018	Current	View →
ISO 19650-2	Organization and digitization of information about buildings and civil engineering works, including BIM — Information management using BIM — Part 2: Delivery phase of the assets	2018	Current	View →
BS EN ISO 7817-1	Building Information Modelling — Level of Information Need — Part 1: Concepts and principles	2024	Current	View →
ISO 12006-2	Building construction — Organization of information about construction works — Part 2: Framework for classification	2015	Current	View →
ISO 12006-3	Building construction — Organization of information about construction works — Part 3: Framework for object-oriented information	2022	Current	View →
ISO 19650-3	Organization and digitization of information about buildings and civil engineering works, including BIM — Information management using BIM — Part 3: Operational phase of the assets	2020	Current	View →
ISO 19650-4	Organization and digitization of information about buildings and civil engineering works, including BIM — Information management using BIM — Part 4: Information exchange	2022	Current	View →
ISO 19650-5	Organization and digitization of information about buildings and civil engineering works, including BIM — Information management using BIM — Part 5: Security-minded approach to information management	2020	Current	View →
ISO 23386	Building information modelling and other digital processes used in construction — Methodology to describe, author and maintain properties in interconnected data dictionaries	2020	Current	View →
ISO 23387	Building information modelling (BIM) — Data templates for construction objects used in the life cycle of built assets — Concepts and principles	2020	Current	View →
ISO 29481-1	Building information models — Information delivery manual — Part 1: Methodology and format	2016	Current	View →
ISO 29481-3	Building information models — Information delivery manual — Part 3: Data schema	2022	Current	View →

Flooring and Paving

28 codes

Code	Title	Year	Status
IS 1489 Part 1	Portland Pozzolana Cement - Specification - Part 1: Fly Ash Based	2013	Current	View →
IS 12269	Ordinary Portland Cement, 53 Grade - Specification	2013	Current	View →
IS 504	Ceramic Glazed Tiles — Specification	2020	Current	View →
IS 1130	Kota Stone (Limestone) - Specification	1969	Current	View →
IS 1135	Marble Slabs and Tiles - Specification	1993	Current	View →
IS 1136	Granite Slabs and Tiles - Specification	1993	Current	View →
IS 1237	Cement Concrete Flooring Tiles - Specification	2015	Current	View →
IS 1443	Precast Terrazzo Tiles - Specification	2019	Current	View →
IS 2506	Code of Practice for Plain Cement Concrete in Floors	1986	Current	View →
IS 2508	Code of Practice for Laying of Concrete Surface Finish	1986	Current	View →
IS 2509	Code of Practice for Cement Concrete Floor Topping	1986	Current	View →
IS 2571	Code of Practice for Laying In-Situ Terrazzo Floor Finish	2002	Current	View →
IS 13712	Cement Concrete Tiles for Flooring (Precast Mosaic Tiles) - Specification	1993	Current	View →
IS 13753	Code of Practice for Laying of Vitrified Tiles for Flooring	1993	Current	View →
IS 14732	Code of Practice for Laying of Precast Concrete Blocks for Paving	2000	Current	View →
IS 14896	Adhesives for Fixing Ceramic and Mosaic Tiles - Specification	2015	Current	View →
IS 15622	Glazed, Vitrified and Unglazed Ceramic Tiles - Specification	2017	Current	View →
IS 15658	Precast Concrete Blocks for Paving - Specification	2023	Current	View →
IS 1121 Part 1	Methods of Test for Determination of Strength Properties of Natural Building Stones - Part 1: Compressive Strength	1974	Current	View →
IS 1121 Part 3	Methods of Test for Determination of Strength Properties of Natural Building Stones - Part 3: Water Absorption	1974	Current	View →
IS 1121 Part 5	Methods of Test for Determination of Strength Properties of Natural Building Stones - Part 5: Abrasion Resistance	1974	Current	View →
IS 1489 Part 2	Portland Pozzolana Cement - Specification - Part 2: Calcined Clay Based	2013	Current	View →
IS 2507	Code of Practice for Granolithic Concrete Floor Finish	1986	Current	View →
IS 6452	High Alumina Cement for Structural Use - Specification	1989	Current	View →
IS 13630 Part 1	Ceramic Tiles - Classification, Sampling and Methods of Test - Part 1: Sampling and Basis for Acceptance	2006	Current	View →
IS 13630 Part 2	Ceramic Tiles - Classification, Sampling and Methods of Test - Part 2: Determination of Water Absorption	2006	Current	View →
IS 13630 Part 4	Ceramic Tiles - Classification, Sampling and Methods of Test - Part 4: Determination of Flexural Strength	2006	Current	View →
IS 14182	Vinyl Asbestos Floor Tiles — Specification	1994	Current	View →

Fasteners, Bolts and Anchors

28 codes

Code	Title	Year	Status
IS 4000 Part 2	Hot-Dip Galvanized Coatings (Mass, Thickness And Uniformity) On Fasteners	1992	Current	View →
IS 4218	Foundation bolts	1976	Current	View →
IS 1363 Part 1	Hexagon Head Bolts, Screws And Nuts of Product Grade C	1984	Current	View →
IS 1363 Part 2	Hexagon Head Bolts, Screws And Nuts of Product Grade A and B	1984	Current	View →
IS 1363 Part 3	Hexagon Nuts, Style 1 and 2, Product Grade A and B	1984	Current	View →
IS 1364 Part 2	Hexagon head screws (sizes M1.6 to M64) of product grade A and B	2018	Current	View →
IS 1364 Part 3	Hexagon nuts, style 1 (sizes M1.6 to M64) of product grade A and B	2018	Current	View →
IS 1367 Part 1	Technical Supply Conditions For Threaded Steel Fasteners - General Requirements	2002	Current	View →
IS 1367 Part 6	Technical Supply Conditions For Threaded Steel Fasteners - Acceptance Inspection	2002	Current	View →
IS 2016	Plain washers - General purpose	1967	Current	View →
IS 2155	Black bolts, nuts and lock nuts (diameter 6 to 39 mm)	1982	Current	View →
IS 3063	Washers for high strength structural bolting	1994	Current	View →
IS 3975	Mild Steel Wire Nails	2017	Current	View →
IS 6639	High strength structural bolts with large width across flats	1972	Current	View →
IS 12431	Hexagon socket head cap screws	2018	Current	View →
IS 12487	Spring washers - Helical - Carbon steel	1990	Current	View →
IS 1775	Steel for high strength structural fasteners	1993	Current	View →
IS 5372	Taper washers for channels	1990	Current	View →
IS 5374	Taper washers for I-beams	1990	Current	View →
IS 6649	High strength structural nuts	1972	Current	View →
IS 10001	Large Washer (Structural) for Steel Structures	2017	Current	View →
IS 11466	Mechanical Anchor Fasteners for Use in Concrete - Specification	1995	Current	View →
IS 11501	Code of practice for installation and testing of mechanical anchor fasteners for use in concrete	1995	Current	View →
IS 11502	Code of practice for design of mechanical anchors for use in concrete	1995	Current	View →
IS 12474	Hexagon prevailing torque type all-metal nuts	1994	Current	View →
IS 1929	Rivets for general purposes (below 12 mm diameter)	1982	Current	View →
IS 2999	Mild steel rivets for general engineering purposes (12 to 48 mm diameter)	1984	Current	View →
IS 7458	Structural rivets (12 to 36 mm diameter)	1984	Current	View →

Structural Engineering and Structural Sections

43 codes

Code	Title	Year	Status
IS 12778	Hot Rolled Parallel Flange Steel Sections for Beams, Columns and Bearing Piles – Dimensions and Section Properties	2004	Current	View →
IS 12843	Tolerances for the erection of steel structures	1989	Current	View →
IS 811	Cold Formed Light Gauge Structural Steel Sections –	1987	Current	View →
IS 3954	Hot Rolled Steel Channel Sections for General Engineering Purposes – Dimensions	1991	Current	View →
IS 5052	Tolerances for Erection of Steel Structures	2006	Current	View →
IS 12779	Rolling and cutting tolerances for hot rolled parallel flange beam and column sections	1989	Current	View →
IS 13321	Steel Tubes Used for Structural Purposes	2005	Current	View →
IS 802	Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 1 Materials,Loads and Permissible Stresses, Section 1: Materials and Loads	2000	Current	View →
IS 802	Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 2: Fabrication, Galvanizing,Inspection and Packing	2000	Current	View →
IS 802	Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing	2000	Current	View →
IS 803	Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks	1976	Current	View →
IS 1173	Hot rolled and slit steel tee bars	1978	Current	View →
IS 1252	Hot rolled steel bulb angles Dimensions	1991	Current	View →
IS 1863	rolled steel bulb flats	1979	Current	View →
IS 1864	Hot-rolled steel L-sections for shipbuilding	1979	Current	View →
IS 2314	Steel Sheet Piling Sections	1986	Current	View →
IS 2713	Tubular Steel Poles for Overhead Power Lines	2000	Current	View →
IS 3443	Crane rail sections	1980	Current	View →
IS 3908	Aluminium equal leg angles	1986	Current	View →
IS 3909	Aluminium Unequal Leg Angles	1986	Current	View →
IS 3921	Aluminium channels	1985	Current	View →
IS 3964	Light rails	1980	Current	View →
IS 5384	Aluminium I-beam	1985	Current	View →
IS 5488	Dimensions and dimensional tolerances for hot rolled steel plates for the ship’s hull structure	1987	Current	View →
IS 6445	Aluminium tee-sections	1985	Current	View →
IS 6449	Aluminium bulb angles for marine application	1987	Current	View →
IS 6475	Aluminium tee bars for marine application	1987	Current	View →
IS 6476	Aluminium bulb plates for marine application	1987	Current	View →
IS 6533	Code of practice for design and construction of steel chimneys, Part 1: Mechanical aspects	2000	Current	View →
IS 6533	Code of practice for design and construction of steel chimneys, Part 2: Structural aspects	2000	Current	View →
IS 8081	slotted sections	1976	Current	View →
IS 8147	Code of Practice for the use of Aluminium Alloys in Structures	1976	Current	View →
IS 8640	Recommendations for dimensional parameters for industrial building	1977	Current	View →
IS 9178	Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 1: General Requirements and Assessment of Loads	2000	Current	View →
IS 9178	Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 2: Design Criteria	2000	Current	View →
IS 9178	Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 3: Bins Designed for Mass Flow and Funnel Flow	2000	Current	View →
IS 9964	Recommendations for maintenance and operation of petroleum storage tanks, Part 1:Preparation of tanks for safe entry and work	2000	Current	View →
IS 9964	Recommendations for Maintenance and Operation of Petroleum Storage Tanks, Part 2: Inspection	2000	Current	View →
IS 10182	Dimensions and Tolerances for Hot Rolled Track Shoe Sections, Part I: Section TS-L1	2000	Current	View →
IS 10182	Dimensions and tolerances for hot-rolled track shoe sections, Part 2: Section TS-H1	2000	Current	View →
IS 15663	Design and installation of natural gas pipelines – Code of Practice, Part 1: Laying of pipelines	2000	Current	View →
IS 15663	Design and installation of natural gas pipelines – Code of Practice, Part 2: Laying of pipelines in crossings	2000	Current	View →
IS 15663	Design and installation of natural gas pipelines – Code of Practice: Part 3 Pre-commissioning and commissioning of pipelines	2000	Current	View →

Coastal and Marine Engineering

24 codes

Code	Title	Year	Status
IS 2911 Part 4	Design and Construction of Pile Foundations - Load Test on Piles	1985	Current	View →
IS 16700	Code of Practice for Durability of Concrete Structures	2018	Current	View →
IS 2911 Part 1/Section 1	Design and Construction of Pile Foundations - Concrete Piles (Driven Cast-in-situ Concrete Piles)	2010	Current	View →
IS 2911 Part 1/Section 2	Design and Construction of Pile Foundations - Concrete Piles (Bored Cast-in-situ Concrete Piles)	2010	Current	View →
IS 2911 Part 1/Section 3	Design and Construction of Pile Foundations - Concrete Piles (Precast Driven Concrete Piles)	2010	Current	View →
IS 2911 Part 1/Section 4	Design and Construction of Pile Foundations - Concrete Piles (Precast Driven Concrete Piles - Raked and Vertical)	2010	Current	View →
IS 3812	Pulverized Fuel Ash (PFA) for Use in Cement Mortar and Concrete - Specification	2019	Current	View →
IS 9077	Code of Practice for Corrosion Protection of Steel Structures	1979	Current	View →
IS 9103	Admixtures for Concrete - Specification	2016	Current	View →
IS 4651 Part 1	Planning and Design of Ports and Harbours - General Design Considerations	1980	Current	View →
IS 4651 Part 2	Planning and Design of Ports and Harbours - Planning and Layout	1980	Current	View →
IS 4651 Part 3	Planning and Design of Ports and Harbours - Breakwaters	1980	Current	View →
IS 4651 Part 4	Planning and Design of Ports and Harbours - Wharves and Jetties	1989	Current	View →
IS 4651 Part 5	Planning and Design of Ports and Harbours - Dry Docks	1980	Current	View →
IS 4651 Part 6	Planning and Design of Ports and Harbours - Quay Walls	1980	Current	View →
IS 4995	Criteria for Design of Berthing Structures	1974	Current	View →
IS 6120	Criteria for Wave Loads on Maritime Structures	1971	Current	View →
IS 8409	Criteria for Design of Rubble Mound Breakwaters	1977	Current	View →
IS 9214	Code of Practice for Shore Protection Structures	1979	Current	View →
IS 10398	Guidelines for Determination of Design Waves in Coastal Waters	1982	Current	View →
IS 10972	Code of Practice for Design and Construction of Rubblemound Structures	1984	Current	View →
IS 11843	Recommendations for Corrosion Protection for Reinforcement in Concrete	1986	Current	View →
IS 12118 Part 2	Protection of Structures Against Corrosion by Cathodic Protection - Application to Steel in Concrete	1991	Current	View →
IS 12165	Guidelines for Estimation of Current Forces on Marine Structures	1987	Current	View →

Surveying and Geotechnical Investigation

20 codes

Code	Title	Year	Status
IS 2911	Code of practice for design and construction of pile foundations	1979	Superseded	View →
IS 14458	Code of practice for piezocone penetration test (CPTU)	1997	Current	View →
IS 4453	Code of practice for undisturbed sampling of soils	1980	Current	View →
IS 7717	Glossary of terms relating to soil mechanics and foundation engineering	1996	Current	View →
IS 8763	Code of practice for in-situ California bearing ratio (CBR) test for soils	1978	Current	View →
IS 10379	Code of practice for standard penetration test (SPT) for soils	1982	Current	View →
IS 10883	Code of practice for selection of exploration methods and bore-hole logging procedures for underground investigations	1984	Current	View →
IS 13611	Code of practice for total station instruments	1992	Current	View →
IS 13620	General requirements for surveying instruments	1992	Current	View →
IS 2974 Part 1	Code of practice for surveying instruments - Part 1: Levels	1980	Current	View →
IS 2974 Part 2	Code of practice for surveying instruments - Part 2: Theodolites	1973	Current	View →
IS 2974 Part 3	Code of practice for surveying instruments - Part 3: Tapes and chains	1980	Current	View →
IS 5529 Part 3	Code of practice for geodetic survey - Part 3: Levelling	1974	Current	View →
IS 9640	Code of practice for field methods of geohydrological investigations	1980	Current	View →
IS 10042	Code of practice for rock mass classification for civil engineering works	1981	Current	View →
IS 11315 Part 1	Methods of test for rocks - Part 1: Determination of water content, density, porosity and absorption	1985	Current	View →
IS 11315 Part 2	Methods of test for rocks - Part 2: Determination of uniaxial compressive strength	1987	Current	View →
IS 11315 Part 3	Methods of test for rocks - Part 3: Determination of point load strength index	1987	Current	View →
IS 14488	Code of practice for electronic distance measuring instruments (EDM)	1998	Current	View →
IS 14902 Part 1	Global positioning system (GPS) - Part 1: Receivers - General characteristics and methods of test	2001	Current	View →

Admixtures and Chemical Products for Concrete

18 codes

Code	Title	Year	Status
IS 10262	Concrete Mix Proportioning - Guidelines	2009	Superseded	View →
IS 10262	Concrete Mix Proportioning - Guidelines	1982	Superseded	View →
IS 2645	Integral cement waterproofing compounds - Specification	2003	Current	View →
IS 2645	Integral cement waterproofing compounds - Specification	1994	Superseded	View →
IS 6925	Methods of test for concrete admixtures	1996	Current	View →
IS 9103	Admixtures for concrete - Specification	2009	Current	View →
IS 9103	Admixtures for concrete - Specification	1979	Superseded	View →
IS 12163	Liquid membrane-forming curing compounds for concrete - Specification	2010	Current	View →
IS 12163	Liquid membrane-forming curing compounds for concrete - Specification	1999	Superseded	View →
IS 9989	Epoxy based resin systems for bonding fresh concrete to hardened concrete - Specification	1981	Current	View →
IS 12163	Liquid membrane-forming curing compounds for concrete - Specification	1987	Superseded	View →
IS 12384	Epoxy resin based system for protection and repair of concrete surfaces - Specification	1988	Current	View →
IS 13600	Adhesives for structural use - Epoxy resin based - Specification	1993	Current	View →
IS 14958	Migrating corrosion inhibitors - Specification	2001	Current	View →
IS 15000	Surface protective coatings for concrete - Specification	2001	Current	View →
IS 15830	Self-compacting concrete - Guidelines	2008	Current	View →
IS 16595	Performance specifications for micro-concrete and polymer-modified mortar for repair and rehabilitation of concrete structures	2017	Current	View →
IS 6925	Methods of test for concrete admixtures	1973	Superseded	View →

Railway Engineering

19 codes

Code	Title	Year	Status
IS 2720 Part 4	Methods of Test for Soils - Grain Size Analysis	1975	Current	View →
IS 16733	Hot Rolled Steel Rails for Railway Tracks - Specification	2018	Current	View →
IS 1729	Hot Rolled Steel Rails	1979	Current	View →
IS 3764	Method of Test for Railway Track Ballast	1966	Current	View →
IS 1442	Elastic Rail Clips	1992	Current	View →
IS 1450	Steel Fish Plates for Indian Railways	1996	Current	View →
IS 2064	Prestressed Concrete Sleepers for Broad Gauge Track - Design	1973	Current	View →
IS 2073	Railway Track Bolts and Nuts	1978	Current	View →
IS 2440	Wooden Sleepers for Railway Tracks	1990	Current	View →
IS 5525	Railway Track Ballast	1969	Current	View →
IS 7192	Code of Practice for Design and Construction of Concrete Railway Bridges	1974	Current	View →
IS 7205	Code of Practice for Design and Construction of Steel Railway Bridges	1974	Current	View →
IS 7634 Part 1	Code of Practice for Level Crossings: Part 1 General Requirements	1974	Current	View →
IS 7634 Part 2	Code of Practice for Level Crossings: Part 2 Road Approaches	1975	Current	View →
IS 7634 Part 4	Code of Practice for Level Crossings: Part 4 Gates and Barriers	1976	Current	View →
IS 10045	Code of Practice for Design and Construction of Prestressed Concrete Railway Bridges	1981	Current	View →
IS 13180	Code of Practice for Design and Construction of Railway Platforms	1991	Current	View →
IS 15086	Prestressed Concrete Sleepers for Broad Gauge Track - Specification	2002	Current	View →
IS 15454	Methods of Testing for Hot Rolled Steel Rails for Railway Track	2004	Current	View →

Demolition, Renovation and Repair of Structures

13 codes

Code	Title	Year	Status
IS 14891	Specification for Fly Ash for use in Cement Mortar and Concrete	2000	Current	View →
IS 17571	Code of Practice for Durability Design and Detailing of Concrete Structures	2021	Current	View →
IS 4081	Safety Code for Working with Construction Machinery	1986	Current	View →
IS 4326	Earthquake Resistant Design and Construction of Buildings - Code of Practice	1993	Current	View →
IS 6061	Grouting for Concrete Structures - Code of Practice	1971	Current	View →
IS 9012	Grouting for Foundation Improvement - Code of Practice	1978	Current	View →
IS 10086	Code of Practice for Preparation and Treatment of Surfaces of Concrete for Application of Finishes	1982	Current	View →
IS 12118 Part 2	Methods of Test for Repair Materials for Concrete Structures - Part 2: Resin-based Materials	1987	Current	View →
IS 12118 Part 3	Methods of Test for Repair Materials for Concrete Structures - Part 3: Adhesives for Structural Bonding	2001	Current	View →
IS 13640	Guidelines for Repair and Rehabilitation of Concrete Structures - General Principles	1993	Current	View →
IS 13642	Recommendations for Selection of Repair Materials for Concrete Structures	1993	Current	View →
IS 13735	Recommendations for Assessment of Durability of Concrete - Methods of Test	1993	Current	View →
IS 15974	Evaluation of Existing Concrete Structures for Durability and Service Life - Guidelines	2012	Current	View →

Environmental and Sanitation

27 codes

Code	Title	Year	Status
IS 17424	Code of practice for sewage pumping stations (First Revision)	2020	Current	View →
IS 2470 Part 1	Code of practice for installation of septic tanks, Part 1: Design criteria and construction (Fourth Revision)	2007	Current	View →
IS 2470 Part 2	Code of practice for installation of septic tanks, Part 2: Recommendations on location, sizing and cleaning (Fourth Revision)	2007	Current	View →
IS 2470 Part 3	Code of practice for installation of septic tanks, Part 3: Secondary treatment (Fourth Revision)	2007	Current	View →
IS 5182	Methods of Measurement of Air Pollution	2018	Current	View →
IS 5326	Indian type water closets - Specification (Second Revision)	2001	Current	View →
IS 7742 Part 1	Flushing cisterns for water closets and urinals, Part 1: Plastic flushing cisterns (First Revision)	1991	Current	View →
IS 7742 Part 2	Flushing cisterns for water closets and urinals, Part 2: Vitreous china flushing cisterns (First Revision)	1991	Current	View →
IS 7935	Criteria for design of waste stabilization ponds (First Revision)	1989	Current	View →
IS 8417	Criteria for design of activated sludge process (First Revision)	1990	Current	View →
IS 8716	Code of practice for use of plastics in sanitary plumbing installations (First Revision)	1990	Current	View →
IS 11624	Guide for solid waste management in urban areas	1986	Current	View →
IS 11729 Part 1	Code of practice for plumbing services in buildings, Part 1: General requirements	1985	Current	View →
IS 11729 Part 2	Code of practice for plumbing services in buildings, Part 2: Cold water supply	1993	Current	View →
IS 11729 Part 3	Code of practice for plumbing services in buildings, Part 3: Hot water supply	1993	Current	View →
IS 11729 Part 4	Code of practice for plumbing services in buildings, Part 4: Drainage and sanitation	1993	Current	View →
IS 13628	Sewage treatment plants - Guidelines for selection of process	1993	Current	View →
IS 16220	Guidelines for design of stormwater management systems	2014	Current	View →
IS 16301	Guidelines for water quality monitoring	2014	Current	View →
IS 16358	Guidelines for onsite wastewater treatment and disposal systems for domestic use (Septic Tanks and Soil Absorption Systems)	2015	Current	View →
IS 10611	Guide for design and construction of sanitary landfills	1983	Superseded	View →
IS 11625	Guide for collection and transportation of solid wastes	1986	Current	View →
IS 11626	Guide for composting of municipal solid waste	1986	Current	View →
IS 12194	Common effluent treatment plants - Guidelines	1987	Current	View →
IS 15410	Landfill sites - Criteria for selection, design, operation and environmental monitoring	2004	Current	View →
IS 15411	Municipal Solid Waste Management - Guidelines for environmental monitoring of landfills	2004	Current	View →
IS 15412	Municipal Solid Waste Management - Guidelines for biomethanation plants	2004	Current	View →

Building Construction Practices incl. Painting, Varnishing

78 codes

Code	Title	Year	Status
IS 11134	Code of practice for setting out of buildings	1984	Current	View →
IS 1834	Hot Applied Sealing Compounds for Joints in Concrete- Specification	1984	Current	View →
IS 2116	Sand for masonry mortars - Specification	1980	Current	View →
IS 2395	Painting of Concrete, Masonry and Plaster Surfaces - Code of Practice, Part 1: Operations and Workmanship	2000	Current	View →
IS 2395	Code of practice for painting concrete, masonry and plaster surfaces, Part 2: Schedules	2000	Current	View →
IS 6313	Code of practice for anti-termite measures in buildings, Part 1: Constructional measures	2000	Current	View →
IS 6313	Code of Practice for Anti-Termite Measures in Buildings, Part 2: Pre-constructional Chemical Treatment Measures	2000	Current	View →
IS 6313	Code of Practice for Anti-termite Measures in Buildings, Part 3: Treatment for Existing Buildings	2000	Current	View →
IS 6509	Code of practice for installation of joints in concrete pavements	1985	Current	View →
IS 12093	Code of practice for laying and fixing sloped roof coverings using plain and corrugated galvanized steel sheets	1987	Current	View →
IS 15183	Guidelines for Maintenance Management of Buildings, Part 1: General	2000	Current	View →
IS 15183	Guidelines for Maintenance Management of Buildings, Part 2: Finance	2000	Current	View →
IS 15183	Guidelines for Maintenance Management of Buildings, Part 3: Labour	2000	Current	View →
IS 1414	Code of practice for fixing wall coverings	1989	Current	View →
IS 1597	Construction of Stone Masonry - Code of Practice, Part 1: Rubble Stone Masonry	2000	Current	View →
IS 1597	Code of practice for construction of stone masonry, Part 2: Ashlar masonry	2000	Current	View →
IS 1634	Code of practice for design and construction of wood stairs for houses	1992	Current	View →
IS 1649	Code of practice for design and construction of flues and chimneys for domestic heating appliances	1962	Current	View →
IS 1838	preformed fillers for expansion joints in concrete pavement and structures (non-extruding and resilient type): Part 1 Bitumen impregnated fibre - Specification	2000	Current	View →
IS 1838	preformed fillers for expansion joints in concrete pavement and structure (non-extruding and resilient type) Part 2 CNSL Aldehyde resin and coconut pith - Specification	2000	Current	View →
IS 1838	Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based	2000	Current	View →
IS 1946	Code of practice for use of fixing devices in walls, ceilings and floors of solid construction	1961	Current	View →
IS 2110	Code of practice for in-situ construction of walls, in buildings with soil-cement	1980	Current	View →
IS 2115	Code of practice for flat-roof finish: mud phuska	1980	Current	View →
IS 2119	Code of practice for construction of brick-cum-concrete composite (madras terrace) floor and roof	1980	Current	View →
IS 2204	Code of practice for construction of reinforced concrete shell roof	1962	Current	View →
IS 2338	Code of practice for finishing of wood and wood-based materials, Part 1: Operations and workmanship	2000	Current	View →
IS 2338	Code of practice for finishing wood and wood-based materials, Part 2: Schedules	2000	Current	View →
IS 2366	Code of practice for nail-jointed timber construction	1983	Current	View →
IS 2441	Code of practice for fixing ceiling covering	1984	Current	View →
IS 2524	Code of practice for the painting of nonferrous metals in buildings, Part 1: Pretreatment	2000	Current	View →
IS 2524	Code of practice for the painting of non-ferrous metals in buildings, Part 2: Painting	2000	Current	View →
IS 2700	Code of practice for roofing with wooden shingles	1987	Current	View →
IS 2858	Code of practice for roofing with Mangalore tiles	1984	Current	View →
IS 3548	Code of Practice for Glazing in Buildings	1988	Current	View →
IS 3630	Construction of Non-load Bearing Gypsum Block Partitions - Code of Practice	1992	Current	View →
IS 4101	Code of practice for external facings and veneers, Part I: Stone facing	2000	Current	View →
IS 4101	Code of Practice for External Facings and Veneers, Part II: Cement Concrete Facing	2000	Current	View →
IS 4101	Code of Practice for External Cladding, Part 3: Wall Tiling and Mosaics	2000	Current	View →
IS 4597	Code of practice for finishing wood and wood-based products with nitrocellulose and cold-catalyzed materials	1968	Current	View →
IS 4891	preferred cut sizes of structural timber - Specification	1988	Current	View →
IS 4924	Method of test for nail-jointed timber trusses, Part I: Destructive test	2000	Current	View →
IS 4924	Method of Test for Nail-jointed Timber Trusses, Part II: Proof Test	2000	Current	View →
IS 4983	Code of Practice for Design and Construction of Nailed Laminated Timber Beams	1968	Current	View →
IS 5119	Code of Practice for Laying and Fixing of Sloped Roof Covering, Part I: Slating	2000	Current	View →
IS 5389	Code of practice for laying hardwood parquet and wood block floors	1969	Current	View →
IS 5390	Code of practice for construction of timber ceilings	1984	Current	View →
IS 5807	Methods of test for clear finishes for wooden furniture, Part 1: Resistance to dry heat	2000	Current	View →
IS 5807	Methods of test for clear finishes for wooden furniture, Part 2: Resistance to wet heat	2000	Current	View →
IS 5807	Methods of test for clear finishes for wooden furniture, Part 3: Resistance to marking by oils and fats	2000	Current	View →
IS 5807	Methods of test for clear finishes for wooden furniture, Part 4: Resistance to marking by liquids	2000	Current	View →
IS 5807	Methods of test for clear finishes for wooden furniture, Part 5: Test for low-angle glare	2000	Current	View →
IS 5807	Methods of Test for Clear Finishes for Wooden Furniture, Part VI: Resistance to Mechanical Damage	2000	Current	View →
IS 6332	Code of practice for construction of floors and roofs using precast doubly-curved shell units	1984	Current	View →
IS 7683	Code of practice for design, fabrication and maintenance of nail-jointed timber posts from small dimensional timber for overhead electric distribution lines for low voltage	1975	Current	View →
IS 9472	Code of practice for laying mosaic parquet flooring	1980	Current	View →
IS 10388	Corrugated coir wood wool cement roofing sheets-Specification	1982	Current	View →
IS 10439	Code of practice for patent glazing	1983	Current	View →
IS 10440	Code of practice for construction of RB and RBC floors and roofs	1983	Current	View →
IS 10566	Methods of test for preformed fillers for expansion joints in concrete paving and structural construction	1983	Current	View →
IS 10957	Joints in Buildings - Vocabulary	1999	Current	View →
IS 10958	A general checklist of functions of joints in building (ISO 3447-1975)	1984	Current	View →
IS 10959	Glossary of terms for sealants for building purposes (ISO 6927-1981)	1984	Current	View →
IS 11096	Code of practice for design and construction of bolt-jointed timber construction	1984	Current	View →
IS 11433	Specification for one part gun-grade polysulphide-based joints sealants, Part 1: General requirements	2000	Current	View →
IS 11433	Specification for one part gun-grade polysulphide-based joint sealants, Part 2: Methods of test	2000	Current	View →
IS 11818	Method of test for laboratory determination of air permeability of joints in buildings	1986	Current	View →
IS 12506	Code of Practice for Improved Thatching of Roof with Rot and Fire Retardant Treatment	1988	Current	View →
IS 12727	Code of practice for no-fines cast in situ cement concrete	1989	Current	View →
IS 13077	Guide for preparation and use of mud mortar in masonry	1991	Current	View →
IS 14428	Guidelines for painting structures in an aggressive chemical environment	1997	Current	View →
IS 15345	Installation of Frameless Door and Window Shutters - Code of Practice	2003	Current	View →
IS 965	Equivalent Metric Units For Scales Dimensions And Quantities In General Construction Work	1963	Current	View →
IS 2118	Code of Practice for Construction of Jack-Arch Type of Bult-up Floor or Roof	1980	Current	View →
IS 2792	Code of practice for design and construction of stone slab over joist floor	1964	Current	View →
IS 3140	Code of practice for painting asbestos cement building products	1965	Current	View →
IS 4407	Code of practice for reed walling	1967	Current	View →
IS 4920	Glossary of terms applicable to roof coverings	1968	Current	View →

Sanitary Appliances and Water Fittings

47 codes

Code	Title	Year	Status
IS 12701	rotational moulded polyethene water storage tanks	1996	Current	View →
IS 1795	Pillar Taps for Water Supply Purposes	1982	Current	View →
IS 5513	Vitreous China Wash Basin and Pedestals	2019	Current	View →
IS 5961	cast iron gratings for drainage purposes	1970	Current	View →
IS 7231	plastic flushing cisterns for water closets and urinals	1994	Current	View →
IS 9758	flush valves and fittings for water closets and urinals	1981	Current	View →
IS 9763	Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services	2000	Current	View →
IS 13114	forged brass gate, globe and check valves for water works purposes	1991	Current	View →
IS 13983	stainless steel sinks for domestic purposes	1994	Current	View →
IS 14845	Resilient Seated Cast Iron Air Relief Valves for Water Works Purposes	2000	Current	View →
IS 771	Glazed Fire-Clay Sanitary Appliances: Part-1 General Requirements	2000	Current	View →
IS 771	Glazed Fire-Clay Sanitary Appliances: Part-2 Specific Requirements of Kitchen And Laboratory Sinks	2000	Current	View →
IS 771	Glazed Fire Clay Sanitary Appliances: Part-3 Specific Requirements of Urinals, Section 1: Slab Urinals	2000	Current	View →
IS 771	Glazed Fire-Clay Sanitary Appliances, Part 4: Specific Requirements of Postmortem Slabs	2000	Current	View →
IS 771	Glazed Fire-clay Sanitary Appliances, Part V: Specific Requirements of Shower Trays	2000	Current	View →
IS 771	Glazed Fire-clay Sanitary Appliances, Part VI: Specific Requirements of Bed Pan Sinks	2000	Current	View →
IS 771	Glazed Fire-Clay Sanitary Appliances, Part 7: Specific Requirements of Slop Sinks	2000	Current	View →
IS 1701	mixing valves for ablutionary and domestic purposes	1960	Current	View →
IS 1703	Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type)	2000	Current	View →
IS 1711	self-closing taps for water supply purposes	1984	Current	View →
IS 2326	Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)	1987	Current	View →
IS 2373	Water Meters (Bulk Type)	1981	Current	View →
IS 2548	plastic seats and covers for water closets, Part 1: Thermoset seats and covers	2000	Current	View →
IS 2548	plastic seats and covers for water closets, Part 2: Thermoplastic seats and covers	2000	Current	View →
IS 2685	Code of practice for selection, installation and maintenance of sluice valves	1971	Current	View →
IS 2963	copper alloy waste fittings for wash basins and sinks	1979	Current	View →
IS 3006	chemically resistant glazed stoneware pipes and fittings	1979	Current	View →
IS 3042	single faced sluice gates (200 to 1200 mm size)	1965	Current	View →
IS 3311	waste plug and its accessories for sinks and wash-basins	1979	Current	View →
IS 3950	surface boxes for sluice valves	1979	Current	View →
IS 4038	foot valves for water works purposes	1986	Current	View →
IS 4346	washers for use with fittings for water services	1982	Current	View →
IS 5312	Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes, Part 1: Single-Door Pattern	2000	Current	View →
IS 5312	Swing Check Type Reflux (non-return) Valves for Water Works Purpose, Part 2: Multi-Door Pattern	2000	Current	View →
IS 5455	cast-iron steps for manholes	1969	Current	View →
IS 6411	gel-coated glass fibre-reinforced polyester resin bathtubs	1985	Current	View →
IS 9140	Method for a sampling of vitreous and fire clay sanitary appliances	1996	Current	View →
IS 9338	cast iron screw-down stop valves and stop and check valves for water works purposes	1984	Current	View →
IS 9739	pressure-reducing valves for domestic water supply systems	1981	Current	View →
IS 9762	polyethene floats (spherical) for float valves	1994	Current	View →
IS 11246	glass fibre reinforced polyester resins (GRP) squatting pans	1992	Current	View →
IS 12234	plastic equilibrium float valve for cold water services	1988	Current	View →
IS 13049	diaphragm type (plastic body) float-operated valves for complex water services	1991	Current	View →
IS 13349	Cast iron single faced thimble mounted sluice gates	1992	Current	View →
IS 14399	Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks, Part 1: panels, Part 2 Guidelines for assembly, installation and test	2000	Current	View →
IS 782	Specification for Caulking Lead	1978	Current	View →
IS 3004	plug cocks for water supply purposes	1979	Current	View →

Plastic Piping System

52 codes

Code	Title	Year	Status
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 1: General Requirements for Fittings	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 2: Specific Requirements for 90° Bends	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 3: Specific Requirements for 90° TEES	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 4: Specific Requirements for Reducers	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 5: Specific Requirements for Ferrule Reducers	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 6: Specific Requirements for Pipe Ends	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 7: Specific Requirements for Sandwich Flanges	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 8: Specific Requirements for Reducing Tees	2000	Current	View →
IS 8008	Injection Moulded/Machined High-Density Polyethylene (HDPE) Fittings for Potable Water Supplies, Part 9: Specific Requirements for Ends Caps	2000	Current	View →
IS 9271	Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage	2004	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 1: General Requirements	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 2: Specific Requirements for Sockets	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 3: Specific Requirements for Straight Reducers	2000	Current	View →
IS 10124	Fabricated PVC- U Fittings for Potable Water Supplies - Specification, Part 4: Specific Requirements for Caps	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 5: Specific Requirements for Equal Tees	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 6: Specific Requirements for Flanged Tail Pieces with Metallic Flanges	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 7: Specific Requirements for Threaded Adaptors	2000	Current	View →
IS 10124	Fabricated PVC-U fittings for Potable Water Supplies, Part 8: Specific Requirements for 90-degree Bends	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 9: Specific Requirements for 60 o Bends	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 10: Specific Requirements for 45o Bends	2000	Current	View →
IS 10124	Fabricated PVC-U fittings for Potable Water Supplies, Part 11: Specific Requirements for 30-degree Bends	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification, Part 12: Specific Requirements for 22 ½o Bends	2000	Current	View →
IS 10124	Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends, Part 12: SPECIFIC REQUIREMENTS FOR 22 ½o BENDS	2000	Current	View →
IS 10124	Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets	2000	Current	View →
IS 10146	Polyethylene Pipes for Water Supply	2020	Current	View →
IS 14885	Polyethene Pipes for the Supply of Gaseous Fuels	2001	Current	View →
IS 15328	Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems	2003	Current	View →
IS 15801	Polypropylene-random copolymer pipes for hot and cold water supplies	2008	Current	View →
IS 4894	Rigid PVC Sheets	2018	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 1: General requirements	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 2: Specific requirements for 45 degrees elbows	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 3: Specific requirements for 90-degree elbows	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 4: Specific requirements for 90-degree tees	2000	Current	View →
IS 7834	Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies, Part 5: Specific Requirements for 45-degree Tees	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 6: Specific requirements for sockets	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 7: Specific requirements for unions	2000	Current	View →
IS 7834	injection moulded PVC socket fittings with solvent cement joints for water supplies, Part 8: Specific requirements for caps	2000	Current	View →
IS 8360	fabricated high-density polyethene (HDPE) fittings for potable water supplies, Part 1: General requirements	2000	Current	View →
IS 8360	fabricated high-density polyethene (MDPE) fittings for potable water supplies, Part 2 Specific requirements for 90-degree tees	2000	Current	View →
IS 8360	fabricated high-density polyethene (HDPE) fittings for potable water supplies, Part 3 Specific requirements for 90-degree bends	2000	Current	View →
IS 12235	Thermoplastics Pipes and Fittings - Methods of Test	2000	Current	View →
IS 12709	glass-fibre reinforced plastic (GRP) pipes joints and fittings for use in potable water supply	1994	Current	View →
IS 13593	UPVC pipe fittings to be used with the UPVC pipes in the suction and delivery lines of agricultural pumps	1992	Current	View →
IS 13916	Code of practice for installation of glass fibre-reinforced plastic (GRP) piping system	1994	Current	View →
IS 14402	GRP pipes joints and fittings for use in sewerage, industrial waste and water (other than potable)	1996	Current	View →
IS 14735	Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge Systems for Inside and Outside Buildings Including Ventilation and Rain Water Systems	1999	Current	View →
IS 15061	Buried Flexible Pipelines — Structural Design	2002	Current	View →
IS 15265	Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps - Specification	2003	Current	View →
IS 15450	Polyethene/ Aluminium/ Polyethylene Composite Pressure Pipes for Hot and Cold Water Supplies	2004	Current	View →
IS 15927	Polyethene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification, Part 1: Fittings for Socket Fusion using Heated Tools	2000	Current	View →
IS 15927	Polyethene Fittings for use with Polyethylene Pipes for the supply of Gaseous Fuels - Specification, Part 2: Spigot Fittings for Butt Fusion for Socket Fusion using Heated Tools and for use with Electro Fusion Fittings	2000	Current	View →
IS 15927	Polyethene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels, Part 3: Electro Fusion Fittings	2000	Current	View →

Cement, Concrete, Aggregates and RCC

37 codes

Code	Title	Year	Status
IS 7320	Specification for concrete slump test apparatus	1974	Current	View →
IS 2430	Methods for Sampling of Aggregates for Concrete	1986	Current	View →
IS 3535	Methods of sampling hydraulic cement	1986	Current	View →
IS 5816	Method of Test Splitting Tensile Strength of Concrete	1999	Current	View →
IS 10079	Specification for cylindrical metal measures for use in tests of aggregates and concrete	1982	Current	View →
IS 10080	Specification for vibration machine for standard cement mortar cubes	1982	Current	View →
IS 12119	General requirements for pan mixers for concrete	1987	Current	View →
IS 14858	Requirements for compression testing machine used for testing of concrete and mortar	2000	Current	View →
IS 457	Code of Practice for General Construction of Plain and Reinforced Concrete for Dams and Other Massive Structures	1957	Current	View →
IS 650	Specification for Standard Sand for Testing of Cement	1991	Current	View →
IS 3085	Method of Test for Permeability of Cement Mortar and Concrete	1965	Current	View →
IS 3466	Masonry cement – Specification	1988	Current	View →
IS 4634	Methods for testing the performance of batch-type concrete mixers	1991	Current	View →
IS 4845	Definitions and terminology relating to hydraulic cement	1968	Current	View →
IS 5512	Specification for flow table for use in tests of hydraulic cement and pozzolanic materials	1983	Current	View →
IS 7246	Recommendations for the use of table vibrators for consolidating concrete	1974	Current	View →
IS 7325	Specification for apparatus for determining constituents of fresh concrete	1974	Current	View →
IS 8042	White Portland cement – Specification	1989	Current	View →
IS 8125	Dimensions and materials of cement rotary kilns, components and auxiliaries (dry process with suspension preheater)	1976	Current	View →
IS 8142	Method of test for determining the setting time of concrete by penetration resistance	1976	Current	View →
IS 9284	Method of test for abrasion resistance of concrete	1979	Current	View →
IS 9399	Specification for apparatus for flexural testing of concrete	1979	Current	View →
IS 9459	Specification for apparatus for use in measurement of length change of hardened cement paste, mortar and concrete	1980	Current	View →
IS 9799	Specification for pressure meter for determination of air content of freshly mixed concrete	1981	Current	View →
IS 10078	Specification for jolting apparatus for testing cement	1982	Current	View →
IS 10850	Specification for apparatus for measurement of water retentivity of masonry cement	1984	Current	View →
IS 10890	Specification for planetary mixer used in tests of cement and pozzolana	1984	Current	View →
IS 11262	Specification for calorimeter for the determination of heat of hydration of hydraulic cement	1985	Current	View →
IS 11263	Specification for cylinder measures for determination of air content of hydraulic cement mortar	1985	Current	View →
IS 11993	Code of practice for the use of screed board concrete vibrators	1987	Current	View →
IS 12089	Specification for granulated slag for the manufacture of Portland slag cement	1987	Current	View →
IS 12423	Method for colourimetric analysis of hydraulic cement	1988	Current	View →
IS 12600	Low-heat Portland cement – Specification	1989	Current	View →
IS 12803	Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer	1989	Current	View →
IS 12813	Method of analysis of hydraulic cement by atomic absorption spectrophotometer	1989	Current	View →
IS 14959	Method of Test determination of water-soluble and acid-soluble chlorides in mortar and concrete, Part 1: Fresh mortar and concrete	2000	Current	View →
IS 14959	Method of Test determination of water-soluble and acid-soluble chlorides in mortar and concrete, Part 2: Hardened mortar and concrete	2000	Current	View →

Plumbing Fixtures and Valves

34 codes

Code	Title	Year	Status
IS 428	Copper Alloy Gate, Globe and Check Valves for Water Supply	2016	Current	View →
IS 554	Pipe Threads Where Pressure-Tight Joints Are Made on the Threads	1999	Current	View →
IS 774	Flushing Cisterns for Water Closets and Urinals - Specification	2022	Current	View →
IS 778	Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes - Specification	1984	Current	View →
IS 780	Sluice Valves for Waterworks Purposes (50 to 300 mm size) - Specification	1984	Current	View →
IS 2046	Spindle Type Gate Valves for Water Works	2019	Current	View →
IS 2556 Part 1	Vitreous Sanitary Appliances (Vitreous China) - General Requirements	2020	Current	View →
IS 2556 Part 2	Vitreous Sanitary Appliances (Vitreous China) - Squatting Pans	2020	Current	View →
IS 2556 Part 3	Vitreous Sanitary Appliances (Vitreous China) - Water Closets (European Type)	2020	Current	View →
IS 2556 Part 4	Vitreous Sanitary Appliances (Vitreous China) - Urinals	2020	Current	View →
IS 2556 Part 5	Vitreous Sanitary Appliances (Vitreous China) - Wash Basins	2020	Current	View →
IS 2643	Dimensions of Pipe Threads Where Pressure Tight Joints Are Not Made on the Threads	2018	Current	View →
IS 2692	Ball Valves for Water Supply - Specification	2018	Current	View →
IS 3677	Fittings for Copper and Copper Alloy Tubes	1998	Current	View →
IS 5382	Rubber Sealing Rings for Gas Mains, Water Mains and Sewers	2018	Current	View →
IS 6784	Water Meters (Multi-Jet Dry Dial Type) - Specification	2016	Current	View →
IS 8931	Glossary of Terms for Valves and Fittings	1989	Current	View →
IS 10118	Plastic Float Valves for Plumbing Systems - Specification	1982	Current	View →
IS 10986	Non-Return Valves for Plumbing Systems - Specification	1984	Current	View →
IS 14846	Cast Iron Gate, Globe and Check Valves for Industrial Purposes - Specification	2018	Current	View →
IS 15320	Flexible Connections for Plumbing Systems - Specification	2003	Current	View →
IS 16017 Part 1	Code of Practice for Water Supply in Buildings - Design	2013	Current	View →
IS 16017 Part 2	Code of Practice for Water Supply in Buildings - Installation	2013	Current	View →
IS 17030	Taps and Mixers - Specification	2020	Superseded	View →
IS 17953 Part 1	Plumbing Taps and Mixers - General Technical Specification	2023	Current	View →
IS 17953 Part 2	Plumbing Taps and Mixers - Test Methods	2023	Current	View →
IS 17953 Part 3	Plumbing Taps and Mixers - Special Technical Specification for Electronic Taps	2023	Current	View →
IS 17953 Part 4	Plumbing Taps and Mixers - Special Technical Specification for Thermostatic Mixer Taps	2023	Current	View →
IS 17953 Part 5	Plumbing Taps and Mixers - Special Technical Specification for Water Economy Taps	2023	Current	View →
IS 2556 Part 6	Vitreous Sanitary Appliances (Vitreous China) - Sinks and Tubs	2020	Current	View →
IS 2556 Part 7	Vitreous Sanitary Appliances (Vitreous China) - Bidets	2020	Current	View →
IS 13959	Water Meters for Hot Water - Specification	1994	Current	View →
IS 14948 Part 1	Backflow Prevention Devices - Air Gaps for Water Supply Installations	2001	Current	View →
IS 14948 Part 2	Backflow Prevention Devices - Reduced Pressure Zone Type Backflow Preventers	2001	Current	View →

Construction Management incl. Safety

14 codes

Code	Title	Year	Status
IS 4912	Safety Requirements for Floor and Wall Openings, Railings and Toe Boards	1978	Current	View →
IS 4082	Recommendations on stacking and storage of construction materials and components at the site	1996	Current	View →
IS 7272	Recommendation for Labour Output Constants for Building Work, Part I: North Zone	2000	Current	View →
IS 7969	Safety code for handling and storage of building materials	1975	Current	View →
IS 8989	Safety code for the erection of concrete framed structures	1978	Current	View →
IS 10067	Material constants in building works	1982	Current	View →
IS 13430	Code of practice for safety during additional construction and alteration to existing buildings	1992	Current	View →
IS 15883	Construction project management - Guidelines, Part 1: General	2000	Current	View →
IS 15883	Construction project management - Guidelines, Part 2: Time Management	2000	Current	View →
IS 4138	Safety code for working in compressed air	1977	Current	View →
IS 4756	Safety code for tunnelling work	1978	Current	View →
IS 5121	Safety code for piling and other deep foundations	1969	Current	View →
IS 10291	Safety code for dress divers in civil engineering works	1982	Current	View →
IS 10302	Unified Nomenclature of Workmen for Civil Engineering	1982	Current	View →

Methods of Measurement of Works of Civil Engg.

27 codes

Code	Title	Year	Status
IS 1200	Methods of measurement of building and civil engineering works, Part 1: Earthwork	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 2: concrete works	2000	Current	View →
IS 1200	Method of Measurement of Building and Civil Engineering Works, Part III: Brickwork	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 4: stone masonry	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 5: formwork	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 6: refractory work	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 7: Hardware	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 8: steelwork and ironwork	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 9: roof covering (including cladding)	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 10: ceiling and linings	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works: Part11 paving, floor finishes dado and skirting	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 13: Whitewashing, colour washing, distempering and painting building surfaces	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 14: glazing	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 15: painting, polishing, varnishing etc	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 16: laying of water and sewer lines including appurtenant items	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 18: demolition and dismantling	2000	Current	View →
IS 1200	Method of Measurement of Building and Civil Engineering Works, Part XIX: Water Supply, Plumbing and Drains	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 20: laying of gas and oil pipelines	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 21: wood-work and joinery	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 22: Materials	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 23: piling	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 24: well foundations	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 25: tunnelling	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering work, Part 26: Acid-resistant lining	2000	Current	View →
IS 1200	Method of measurement of building and civil engineering works, Part 27: Earthwork done by mechanical appliances	2000	Current	View →
IS 1200	Methods of building and civil engineering works, Part 28: Sound insulation works	2000	Current	View →
IS 3861	Method of Measurement of Plinth, Carpet and Rentable Area of Buildings	2002	Current	View →

Precast and Prefabricated Concrete

18 codes

Code	Title	Year	Status
IS 2185 Part 3	Concrete Masonry Units - Specification - Part 3: Lightweight Aggregate Concrete Blocks	2005	Current	View →
IS 6070	Precast Concrete Manholes - Specification	1990	Current	View →
IS 14893	Ready-Mixed Concrete - Specification	2019	Current	View →
IS 17565	Precast Concrete Boundary Wall Components – Specification	2021	Current	View →
IS 6441 Part 1	Methods of Test for Cellular Concrete - Part 1: Dry Density	1972	Current	View →
IS 6441 Part 2	Methods of Test for Cellular Concrete - Part 2: Compressive Strength	1972	Current	View →
IS 6441 Part 3	Methods of Test for Cellular Concrete - Part 3: Modulus of Elasticity	1972	Current	View →
IS 6441 Part 4	Methods of Test for Cellular Concrete - Part 4: Drying Shrinkage	1972	Current	View →
IS 10701	Code of Practice for Construction of Precast Concrete Structures	2019	Current	View →
IS 10703	Code of Practice for Joints in Precast Concrete Construction	1983	Current	View →
IS 10704	Precast Concrete Elements - Dimensions and Tolerances	1983	Current	View →
IS 11440	Precast Concrete Ribbed Floor Slabs - Specification	1985	Current	View →
IS 12262	Use of Superplasticizing Admixtures in Concrete - Guidelines	1987	Current	View →
IS 15478	Precast Concrete Hollow Core Slabs - Specification	2004	Current	View →
IS 15916	Precast Concrete Components - General Requirements for Production and Delivery	2011	Current	View →
IS 16053	Guidelines for Design and Construction of Precast Concrete Buildings	2013	Current	View →
IS 16503	Design and Construction of Composite Concrete Floor Slabs Using Precast Planks and Cast-in-situ Concrete - Code of Practice	2016	Current	View →
IS 17564	Precast Concrete Compound Wall Panels - Specification	2021	Current	View →

Irrigation and Canal Structures

16 codes

Code	Title	Year	Status
IS 10432	Criteria for Design of Barrages and Weirs	1982	Current	View →
IS 6512	Criteria for Design of Cross-Section for Canals	2018	Current	View →
IS 6932 Part 2	Code of Practice for Earthwork - Part 2: Filling, Forming and Compaction	1973	Current	View →
IS 11568	Criteria for Design of Protective Filters for Hydraulic Structures	1986	Current	View →
IS 6516	Criteria for Design of Upstream and Downstream Transitions in Lined Canals	1990	Current	View →
IS 7288	Code of Practice for Design and Construction of Masonry Structures for Irrigation and Drainage	1992	Current	View →
IS 9456	Criteria for Design of Lined Canals	1980	Current	View →
IS 10430	Criteria for Design of Siphons	2009	Current	View →
IS 10431	Criteria for Design of Aqueducts and Other Cross Drainage Works	1982	Current	View →
IS 10834	Criteria for Design of Canal Structures: Head Regulators and Cross Regulators	1984	Current	View →
IS 11521	Criteria for Hydraulic Design of Check Dams	1985	Current	View →
IS 11522	Criteria for Hydraulic Design of Drop Structures	1985	Current	View →
IS 11551	Criteria for Design of Canal Structures: Flumes	1986	Current	View →
IS 14207	Guidelines for Canal Lining with Geomembranes	1994	Current	View →
IS 15632	Criteria for Seismic Design of Hydraulic Structures	2015	Current	View →
IS 16739	Guidelines for Design of Lined Canals Using Rigid Lining	2018	Current	View →

Geosynthetics and Ground Improvement

22 codes

Code	Title	Year	Status
IS 1892	Code of Practice for Subsurface Investigation for Foundations	1993	Current	View →
IS 13325 Part 1	Geosynthetics - Geotextiles - General	2018	Current	View →
IS 15382 Part 1	Geosynthetics - Geomembranes - General Characteristics and Methods of Test	2020	Current	View →
IS 13325 Part 2	Geosynthetics - Geotextiles - Methods of Test for Physical Properties	2020	Current	View →
IS 13325 Part 3	Geosynthetics - Geotextiles - Methods of Test for Hydraulic Properties	2020	Current	View →
IS 13325 Part 4	Geosynthetics - Geotextiles - Methods of Test for Mechanical Properties	2020	Current	View →
IS 13325 Part 6	Geosynthetics - Geotextiles - Guide for Selection and Usage for Reinforcement, Separation and Filtration	2020	Current	View →
IS 14065	Gabions - Code of Practice for Design and Construction	1994	Current	View →
IS 14066	Geosynthetic Clay Liners (GCL) - Specification	1994	Current	View →
IS 14458 Part 1	Code of Practice for Soil Nailing - Guidelines for Design	1998	Current	View →
IS 14458 Part 2	Code of Practice for Soil Nailing - Guidelines for Construction and Quality Control	1998	Current	View →
IS 14593	Guidelines for Design and Construction of Reinforced Earth Retaining Walls	1998	Current	View →
IS 14710 Part 1	Geosynthetics - Geogrids - General Characteristics and Methods of Test	2020	Current	View →
IS 14986	Code of Practice for Design and Construction of Ground Anchors	2001	Current	View →
IS 15024	Guidelines for Design of Reinforced Soil Structures (General)	2001	Current	View →
IS 15284 Part 1	Code of Practice for Ground Improvement - General Guidelines for Selection of Ground Improvement Techniques	2003	Current	View →
IS 15284 Part 2	Code of Practice for Ground Improvement - Stone Columns	2003	Current	View →
IS 15284 Part 5	Code of Practice for Ground Improvement - Vertical Drains and Preloading	2003	Current	View →
IS 15284 Part 7	Code of Practice for Ground Improvement - Grouting	2003	Current	View →
IS 16327	Guidelines for Design of Geosynthetics in Road Embankments	2014	Current	View →
IS 16670	Geosynthetics - Geocells - Specification	2018	Current	View →
IS 17539	Geosynthetics - Guide for Design for Erosion Control Applications	2021	Current	View →

Drainage, Sewerage and Sanitary Fittings

29 codes

Code	Title	Year	Status
IS 458 Part 1	Precast Concrete Pipes (With and Without Reinforcement) - Part 1: Requirements for Spun Pipes	2003	Current	View →
IS 651	Salt Glazed Stoneware Pipes and Fittings	1992	Current	View →
IS 1536	Ductile Iron Pipes for Water and Sewage	2001	Current	View →
IS 1726 Part 1	Cast Iron Manhole Covers and Frames - Part 1: General Requirements	1991	Current	View →
IS 1726 Part 2	Cast Iron Manhole Covers and Frames - Part 2: Specific Requirements for Different Classes	1991	Current	View →
IS 1729	Cast Iron Grating with Frame for Drainage Purposes	1964	Current	View →
IS 1742 Part 1	Code of Practice for Drainage (Outside Buildings) - Part 1: Surface Water Drains	1972	Current	View →
IS 1742 Part 2	Code of Practice for Drainage (Outside Buildings) - Part 2: Foul Water Drains	1972	Current	View →
IS 1742 Part 3	Code of Practice for Drainage (Outside Buildings) - Part 3: Domestic Drainage	1972	Current	View →
IS 2470 Part 1	Code of Practice for Septic Tanks - Part 1: Design Criteria and Construction	1985	Current	View →
IS 2470 Part 2	Code of Practice for Septic Tanks - Part 2: Disposal of Septic Tank Effluent	1985	Current	View →
IS 2556	Vitreous China Wash Basins	1994	Current	View →
IS 2558 Part 1	Vitreous China Water Closets (Indian Type) - Part 1: Specific Requirements	1985	Current	View →
IS 2558 Part 2	Vitreous China Water Closets (European Type) - Part 2: Specific Requirements	1985	Current	View →
IS 4984	High Density Polyethylene Pipes for Potable Water Supply	1995	Current	View →
IS 5523	Sewage Treatment — Guide for Selection of Treatment Type	2019	Current	View →
IS 10150	Plastic Cisterns for Water Closets	1982	Current	View →
IS 10418	UPVC Pipes for Soil and Waste Discharge Inside Buildings	2019	Current	View →
IS 12003	Precast Concrete Inspection Chambers for Drainage and Sewerage	1986	Current	View →
IS 13592	Unplasticized PVC (uPVC) Pipes for Non-Pressure Drainage and Sewerage Systems	1992	Current	View →
IS 14333	High Density Polyethylene (HDPE) Pipes for Sewerage, Industrial Effluent and Drainage	1996	Current	View →
IS 14732	Plastic Water Closet Seats and Covers	1999	Current	View →
IS 15701	Ductile Iron Manhole Covers and Frames	2006	Current	View →
IS 772	Vitreous Sanitary Appliances (Vitreous China) - General Requirements	1985	Current	View →
IS 2581	Vitreous China Urinals	1972	Current	View →
IS 3989	Bitumen Mastic for Water Proofing of Wet Areas and Drainage Systems	2000	Current	View →
IS 7888	Glazed Stoneware Pipes and Fittings	1996	Current	View →
IS 13414	Precast Concrete Septic Tanks	1992	Current	View →
IS 1537	Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage	1976	Current	View →

Special Structures

8 codes

Code	Title	Year	Status
IS 2825	Code for Unfired Pressure Vessels	1969	Current	View →
IS 2210	Criteria for design of reinforced concrete shell structures and folded plates	1988	Current	View →
IS 3935	Code of practice for composite construction	1966	Current	View →
IS 4090	Criteria for design of reinforced concrete arches	1967	Current	View →
IS 6966	Acceptance Test for Hydraulic Turbines	2019	Current	View →
IS 7285	LPG Cylinders — Specification	2017	Current	View →
IS 11384	Code of Practice for Composite Construction in Structural Steel and Concrete	1985	Current	View →
IS 11504	Criteria for the structural design of reinforced concrete natural draught cooling towers	1985	Current	View →

Painting, Coatings and Surface Finishing

36 codes

Code	Title	Year	Status
IS 5	Colours for Ready Mixed Paints and Enamels	2019	Current	View →
IS 104	Ready Mixed Paint, Brushing, Zinc Chrome, Priming, For Steel - Specification	2017	Current	View →
IS 109	Ready Mixed Paint, Brushing, Red Oxide-Zinc Chrome, Priming, For Ferrous Metals - Specification	2017	Current	View →
IS 110	Ready Mixed Paint, Brushing, Red Oxide, Priming, For Ferrous Metals - Specification	2017	Current	View →
IS 116	Ready Mixed Paint, Brushing, Coloured, Enamel, For Exterior Use - Specification	2000	Current	View →
IS 133	Emulsion Paint for Interior Use - Specification	2013	Current	View →
IS 1303	Oil Based Paints for General Purposes	2004	Current	View →
IS 1573	Electroplated Coatings of Zinc on Iron and Steel	2018	Current	View →
IS 2074	Ready Mixed Paint, Brushing, Bituminous, Black, Lead Free	1992	Current	View →
IS 2932	Enamel, Synthetic, Exterior (a) Undercoating (b) Finishing	1993	Current	View →
IS 4759	Hot-Dip Zinc Coatings on Structural Steel and Other Allied Products	1996	Current	View →
IS 9862	Powder Coatings for General Purposes - Specification	2008	Current	View →
IS 13213	Thermosetting Powder Coatings - Specification	1991	Current	View →
IS 14217	Bituminous Black Paint for Use on Steel Work Exposed to Weather - Specification	2004	Current	View →
IS 14713	Zinc Rich Priming Paint - Specification	2017	Current	View →
IS 15152	Anti-Corrosion Treatment for Steel Structures - Code of Practice	2002	Current	View →
IS 16503	Polyurethane Based Coatings - Specification	2017	Current	View →
IS 101 Part 1/Sec 1	Methods of sampling and test for paints, varnishes and related products: Part 1 Tests on liquid paints (General characteristics) Section 1 Sampling, Preparation of test panels, etc.	1986	Current	View →
IS 101 Part 2/Sec 1	Methods of sampling and test for paints, varnishes and related products: Part 2 Optical properties Section 1 Colour	1986	Current	View →
IS 101 Part 3/Sec 1	Methods of sampling and test for paints, varnishes and related products: Part 3 Mechanical tests for paint films Section 1 Drying time	1987	Current	View →
IS 101 Part 4/Sec 1	Methods of sampling and test for paints, varnishes and related products: Part 4 Durability tests Section 1 Accelerated weathering	1988	Current	View →
IS 101 Part 5/Sec 1	Methods of sampling and test for paints, varnishes and related products: Part 5 Chemical tests Section 1 Volatile matter	1988	Current	View →
IS 111	Ready Mixed Paint, Brushing, White, Enamel, For Interior Use - Specification	2000	Current	View →
IS 136	Ready Mixed Paint, Brushing, Road Marking - Specification	1996	Current	View →
IS 158	Ready Mixed Paint, Brushing, Bituminous, Black, Lead Free, Acid, Alkali and Heat Resisting - Specification	2008	Current	View →
IS 348	Varnish, Brushing, Finishing, Clear, For General Purposes - Specification	2007	Current	View →
IS 351	Varnish, Brushing, Finishing, Clear, For Wood, Interior - Specification	2007	Current	View →
IS 1068	Electroplated Coatings of Nickel and Chromium	2016	Current	View →
IS 1477 Part 1	Methods of sampling and test for varnishes and lacquers: Part 1 General	1982	Current	View →
IS 2530	Methods of Sampling of Paints, Varnishes and Related Products	1963	Current	View →
IS 2544	Porcelain Enamel — Methods of Test	2019	Current	View →
IS 6012	Inorganic Zinc Rich Paint (Potassium Silicate Based)	2018	Current	View →
IS 9954	Steel Abrasives for Blast Cleaning - Specification	1981	Current	View →
IS 12903	Non-Metallic Abrasives for Blast Cleaning - Specification	1990	Current	View →
IS 13608	Epoxy Powder Coatings - Specification	1993	Current	View →
IS 15488	Zinc Flake Coatings for Protection of Ferrous Components Against Corrosion - Specification	2004	Current	View →

Doors, Windows and Shutters

28 codes

Code	Title	Year	Status
IS 207	Mild Steel Butt Hinges	1990	Current	View →
IS 1003 Part 1	Timber Panelled and Glazed Shutters - Part 1: Door Shutters (B.L.T. type)	2003	Current	View →
IS 1003 Part 2	Timber Panelled and Glazed Shutters - Part 2: Window and Ventilator Shutters (B.L.T. type)	1997	Current	View →
IS 1038	Steel Doors, Window and Ventilator Frames	1994	Current	View →
IS 1949	Metallic Tower Bolts	2009	Current	View →
IS 2553 Part 1	Safety Glass - Part 1: General	1990	Current	View →
IS 2553 Part 2	Safety Glass - Part 2: Laminated Safety Glass	1990	Current	View →
IS 2835	Flat Transparent Sheet Glass	2009	Current	View →
IS 4020	Methods of Test for Wooden Flush Door Shutters	1998	Current	View →
IS 4021	Door and Window Frames (Timber)	1995	Current	View →
IS 4351	Steel Door Frames	1976	Current	View →
IS 4834	Steel Windows and Ventilators	1990	Current	View →
IS 7452	Steel Rolling Shutters and Rolling Grills	2009	Current	View →
IS 12858	Anodized Aluminium Sections for Doors, Windows and Ventilators	2002	Current	View →
IS 13400	Aluminium Doors, Windows and Ventilators - Code of Practice for Construction and Installation	1992	Current	View →
IS 14286	Unplasticized PVC Doors and Windows	2019	Current	View →
IS 14900	Transparent Float Glass	2018	Current	View →
IS 206	Door Bolts (Aldrop type)	1986	Current	View →
IS 362	Hasps and Staples	1990	Current	View →
IS 363	Catches for Doors and Windows	1993	Current	View →
IS 2553 Part 3	Safety Glass - Part 3: Toughened Safety Glass	1990	Current	View →
IS 4948	Code of Practice for Glazing in Buildings	1994	Current	View →
IS 6318	Hydraulic Door Closers (with or without check action)	1971	Current	View →
IS 6343	Floor Springs (Hydraulic) for Doors	1971	Current	View →
IS 13362 Part 1	Methods of Test for Doors and Window Assemblies - Part 1: Operating Forces	1992	Current	View →
IS 13362 Part 2	Methods of Test for Doors and Window Assemblies - Part 2: Air Permeability	1992	Current	View →
IS 13362 Part 3	Methods of Test for Doors and Window Assemblies - Part 3: Water Tightness	1992	Current	View →
IS 13362 Part 4	Methods of Test for Doors and Window Assemblies - Part 4: Wind Resistance	1992	Current	View →

Roofing Materials

30 codes

Code	Title	Year	Status
IS 2779	Galvanized steel sheets (plain and corrugated)	1991	Current	View →
IS 3224	Specification for Corrugated Fibre Cement Sheets	2002	Current	View →
IS 6071	Concrete interlocking roofing tiles	1986	Current	View →
IS 6911	Stainless steel plate, sheet and strip - Specification	2017	Current	View →
IS 7191	Bituminous felt for waterproofing and damp-proofing - Specification	2018	Current	View →
IS 12435	Mineral wool thermal insulation materials - Specification	2022	Current	View →
IS 14245	Prepainted hot-dip metallic coated steel sheets/coils for roofing and cladding	1995	Superseded	View →
IS 14756	Aluminium and aluminium alloy sheets, strips, and plates for roofing and cladding	2000	Current	View →
IS 14777	Bitumen membrane for waterproofing (modified bitumen membranes)	2000	Current	View →
IS 14862	Fibre cement sheets and boards for roofing and general building purposes	2000	Current	View →
IS 15000	Profiled sheets for roofing and wall cladding	2000	Current	View →
IS 15089	Fasteners for roofing and cladding applications	2001	Current	View →
IS 15809	Liquid applied polymeric waterproofing membranes	2008	Current	View →
IS 15965	Coated steel sheets for roofing and cladding	2012	Current	View →
IS 17260	Polycarbonate profiled sheets for roofing and cladding	2020	Current	View →
IS 459	Corrugated and semi-corrugated asbestos cement sheets	1992	Current	View →
IS 654	Clay roofing tiles, Mangalore pattern	1992	Current	View →
IS 1464	Clay ridge and ceiling tiles	1986	Current	View →
IS 1640	Code of practice for waterproofing of roofs with bitumen felts	1960	Current	View →
IS 2690 Part 1	Burnt clay flat terracing tiles - Part 1: Hand-made	1993	Current	View →
IS 2690 Part 2	Burnt clay flat terracing tiles - Part 2: Machine-made	1993	Current	View →
IS 3698 Part 1	Bitumen mastic for roofing and waterproofing - Part 1: General requirements	1991	Current	View →
IS 4321 Part 1	Concrete roofing tiles - Part 1: Plain tiles	1992	Current	View →
IS 4321 Part 2	Concrete roofing tiles - Part 2: Interlocking tiles	1992	Current	View →
IS 5871	Bitumen based sealing compounds for joints in concrete	1970	Current	View →
IS 9091	Expanded polystyrene (EPS) boards for thermal insulation - Specification	2020	Current	View →
IS 10567	Adhesives for fixing expanded polystyrene slabs	1983	Current	View →
IS 12592	Fibre reinforced concrete (FRC) roofing sheets	1988	Current	View →
IS 13919	Rigid cellular polyurethane (PU) and polyisocyanurate (PIR) foam for thermal insulation - Specification	2018	Current	View →
IS 14457	Aluminium alloy corrugated sheets for roofing and cladding	1997	Current	View →

Waterproofing and Damp Proofing

27 codes

Code	Title	Year	Status
IS 702	Industrial Bitumen - Specification	2017	Current	View →
IS 1202	Methods for testing tar and bitumen: Determination of specific gravity	1978	Current	View →
IS 1205	Methods for testing tar and bitumen: Determination of penetration	1978	Current	View →
IS 1208	Methods for testing tar and bitumen: Determination of ductility	1978	Current	View →
IS 1322	Bitumen felts for waterproofing and damp-proofing - Specification	1982	Current	View →
IS 2645	Integral Cement Waterproofing Compounds - Specification	1975	Superseded	View →
IS 3067	Code of practice for general waterproofing and damp-proofing of buildings	1988	Current	View →
IS 6494	Code of practice for waterproofing of concrete roof slabs	1988	Current	View →
IS 9862	Code of practice for waterproofing of roofs and walls with built-up bituminous felts	1981	Current	View →
IS 15477	Acrylic based cementitious composite coatings for water proofing - Specification	2004	Current	View →
IS 15808	Polymer modified bituminous sheets for waterproofing - Specification	2008	Current	View →
IS 16071	Polyvinyl chloride (PVC) sheets for waterproofing - Specification	2013	Current	View →
IS 16186	Liquid applied waterproofing membranes based on polymer modified cementitious systems - Specification	2014	Current	View →
IS 17290	Ethylene Propylene Diene Monomer (EPDM) sheets for waterproofing - Specification	2020	Current	View →
IS 17466	Polyurethane based sealants for construction - Specification	2020	Current	View →
IS 702	Industrial Bitumen - Specification	1988	Superseded	View →
IS 1046	Hot applied bituminous waterproofing materials - Specification	1985	Current	View →
IS 1047	Cold applied bituminous waterproofing materials - Specification	1985	Current	View →
IS 1203	Methods for testing tar and bitumen: Determination of viscosity	1978	Current	View →
IS 1345	Bitumen mastic for waterproofing - Specification	1982	Current	View →
IS 3384	Code of practice for laying bitumen felt for roofing	1986	Current	View →
IS 9510	Code of practice for membrane waterproofing in wet areas of buildings	1980	Current	View →
IS 12118 Part 1	Polysulphide based sealants - Code of practice for use in building construction	1987	Current	View →
IS 12118 Part 2	Polysulphide based sealants - Specification	1992	Current	View →
IS 15389	Geosynthetics - Bituminous geomembranes for canal lining and similar applications - Specification	2003	Current	View →
IS 15588	Silicone based sealants for construction - Specification	2005	Current	View →
IS 16474	Cement based polymer modified repair mortar/coating for waterproofing - Specification	2017	Current	View →

Public Health Engineering

54 codes

Code	Title	Year	Status
IS 4127	Code of practice for laying glazed stoneware pipes	1983	Current	View →
IS 5329	Code of practice for sanitary pipe work above ground for buildings	1983	Current	View →
IS 5822	Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply	1994	Current	View →
IS 7558	Code of practice for domestic hot water installations	1974	Current	View →
IS 8413	Requirements for biological treatment equipment, Part 1: Trickling filters	2000	Current	View →
IS 8413	Requirements for biological treatment end equipment, Part 2: Activated sludge process and its modifications	2000	Current	View →
IS 10446	Glossary of terms relating to water supply and sanitation	1983	Current	View →
IS 11401	Requirements for slow sand filters, Part 1: General guidelines	2000	Current	View →
IS 11401	General requirements for slow sand filters, Part 2: Design, construction, operation and maintenance	2000	Current	View →
IS 11906	Recommendations for cement mortar lining for cast iron mild steel and ductile-iron pipes and fittings for transportation of water	1986	Current	View →
IS 12183	Code of practice for plumbing in multi-storied buildings, Part 1: Water supply	2000	Current	View →
IS 12288	Code of Practice for Use and Laying of Ductile Iron Pipes	1987	Current	View →
IS 3114	Code of practice for laying cast iron pipes	1994	Current	View →
IS 4111	Code of practice for ancillary structures in the sewerage system, Part I: Manholes	2000	Current	View →
IS 4111	Code of practice for ancillary structures in the sewerage system, Part II: Flushing tanks	2000	Current	View →
IS 4111	Code of practice for ancillary structures in the sewerage system, Part III: Inverted syphon	2000	Current	View →
IS 4111	Code of Practice for Ancillary Structures in Sewerage System, Part IV: Pumping Stations and Pumping Mains (Rising mains)	2000	Current	View →
IS 4111	Code of practice for ancillary structures in the sewerage system, Part 5: Tidal outfalls	2000	Current	View →
IS 5611	Code of Practice for Construction of Waste Stabilization Ponds (Facultative Type)	1987	Current	View →
IS 6279	equipment for grit removal devices	1971	Current	View →
IS 6280	sewage screens	1971	Current	View →
IS 6295	Code of practice for water supply and drainage in high altitudes and sub-zero temperature regions	1986	Current	View →
IS 6924	Code of Practice for the Construction of Refuse Chutes in Multi storeyed Buildings	1973	Current	View →
IS 7090	Guidelines for rapid mixing devices	1985	Current	View →
IS 7208	Guidelines for flocculator devices	1992	Current	View →
IS 7232	Method for Imhoff cone test	1974	Current	View →
IS 7740	Code of practice for construction and maintenance of road gullies	1985	Current	View →
IS 8419	Requirements for filtration equipment, Part 1: Filtration media - sand and gravel	2000	Current	View →
IS 8419	Requirements for rapid sand gravity filtration equipment, Part 2: Under drainage system	2000	Current	View →
IS 9110	Hand Operated Augers for Cleaning Water-closets, Pipes and Sewers	1979	Current	View →
IS 9222	Recommendations for handling and dosing devices for chemicals for water treatment, Part I: Coagulants	2000	Current	View →
IS 10037	Requirements for sludge dewatering equipment, Part I: Sludge drying beds-sand, gravel and underdrains	2000	Current	View →
IS 10037	Requirements for sludge de-watering equipment, Part 2: Vacuum filtration equipment	2000	Current	View →
IS 10037	Requirements for sludge de-watering equipment, Part 3: Centrifugal equipment (Solid bowl type)	2000	Current	View →
IS 10053	Requirements for equipment for Jackson candle turbidimeter and determination of turbidity	1981	Current	View →
IS 10261	Requirements for settling tank (clarifier equipment) for wastewater treatment	1982	Current	View →
IS 10313	Requirements for settling tank (clarifier equipment) for water treatment plant	1982	Current	View →
IS 10552	buckets to be used in the power-driven bucket-type sewer cleaning machine	1983	Current	View →
IS 10553	Requirements for chlorination equipment, Part I: General guidelines for chlorination plants including handling, storage and safety of chlorine cylinders and drums	2000	Current	View →
IS 10553	Requirements for chlorination equipment, Part 2: Vacuum feed type chlorinators	2000	Current	View →
IS 10553	Requirements for chlorination equipment, Part 4: Gravity feed type gaseous chlorinators	2000	Current	View →
IS 10553	Requirements of chlorination equipment, Part 5: Bleaching powder solution feeder displacement type chlorinator	2000	Current	View →
IS 10595	Requirements for power-driven bucket-type sewer cleaning machine	1983	Current	View →
IS 11117	Requirements for power-driven rodding machine for sewers	1984	Current	View →
IS 11387	Requirements for high-pressure jetting machine for sewer cleaning	1985	Current	View →
IS 11397	attachment tools for power-driven rodding machines for sewers	1985	Current	View →
IS 11925	pitch-impregnated fibre pipes and fittings for drainage purposes	1986	Current	View →
IS 11931	sewer cleaning metal rods	1987	Current	View →
IS 11972	Code of practice for safety precautions to be taken when entering a sewerage system	1987	Current	View →
IS 12251	Code of practice for drainage of building basements	1987	Current	View →
IS 12314	Code of practice for sanitation with leaching pits for rural community	1987	Current	View →
IS 13166	mechanical surface aerators-guidelines for evaluation and testing	1992	Current	View →
IS 13360	Packaged Natural Mineral Water	2013	Current	View →
IS 13496	General requirements of suction machine for cleaning sewers, manholes and ancillary structures provided on sewer line and closed stormwater drains	1992	Current	View →

Aluminium and Non-Ferrous Metals

39 codes

Code	Title	Year	Status
IS 427	Wrought Copper and Copper Alloy Tubes for General Engineering	2020	Current	View →
IS 733	Wrought Aluminium and Aluminium Alloy Plate, Sheet and Strip for General Engineering Purposes - Specification	1983	Current	View →
IS 737	Wrought Aluminium and Aluminium Alloy Sheet and Strip for General Engineering Purposes	2008	Current	View →
IS 1285	Wrought Aluminium and Aluminium Alloy Extruded Round Tubes and Hollow Sections	2020	Current	View →
IS 1868	Anodic coatings on aluminium and its alloys - Specification	1997	Current	View →
IS 2848	Anodized aluminium for architectural purposes - Specification	1997	Current	View →
IS 4736	Hot-Dip Galvanized Coatings on Structural Steel and Other Allied Products - Specification	2003	Current	View →
IS 5082	Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes - Specification	1998	Current	View →
IS 6179	Aluminium and Aluminium Alloy Ingots for Castings for General Engineering Purposes - Specification	1997	Current	View →
IS 6912	Copper Tubes for Refrigeration Purposes - Specification	1985	Current	View →
IS 10677	Copper and Copper Alloy Fittings for Plumbing - Specification	2004	Current	View →
IS 13620	Continuous Hot-Dip Zinc/Zinc-Alloy Coated Steel Sheet and Strip - Specification	1993	Current	View →
IS 191	Copper - Designation of Grades	2007	Current	View →
IS 197	Copper Rods and Bars for Electrical Purposes - Specification	1997	Current	View →
IS 209	Zinc Ingots - Specification	1992	Current	View →
IS 291	Manganese Bronze Ingots and Castings	2005	Current	View →
IS 292	Phosphor Bronze Ingots and Castings	2009	Current	View →
IS 318	Leaded Tin Bronze Ingots and Castings	2003	Current	View →
IS 319	Free Cutting Brass Bars, Rods and Sections	2019	Current	View →
IS 320	Brass Rods and Bars	2019	Current	View →
IS 407	Copper Sheet and Strip for General Purposes - Specification	1996	Current	View →
IS 410	Brass Sheets, Strips and Foils	2015	Current	View →
IS 419	Leaded Tin Bronze Rods and Bars	2020	Current	View →
IS 617	Aluminium and Aluminium Alloy Ingots for Remelting	1994	Current	View →
IS 636	Non-Ferrous Metals and Alloy Ingots for Sand Casting	1988	Current	View →
IS 734	Wrought Aluminium and Aluminium Alloy Drawn Tube for General Engineering Purposes - Specification	1975	Current	View →
IS 735	Wrought Aluminium and Aluminium Alloy Bar, Rod and Section for General Engineering Purposes - Specification	1975	Current	View →
IS 1648	Aluminium Alloy Die Castings for Engineering Purposes	2018	Current	View →
IS 1948	Aluminium and Aluminium Alloy Ingots for Remelting for General Engineering Purposes - Specification	2006	Current	View →
IS 1950	Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections for Structural Purposes - Specification	1997	Current	View →
IS 2109	Aluminium alloy sand castings for general engineering purposes - Specification	2002	Current	View →
IS 2419	Wrought Aluminium and Aluminium Alloy Solid Extruded Sections for Architectural Purposes - Specification	1982	Current	View →
IS 2501	Copper tubes for general engineering purposes	1963	Withdrawn	View →
IS 3182	Wrought Copper and Copper Alloy Rods, Bars and Sections for General Engineering Purposes - Specification	1998	Current	View →
IS 4412	Brass Ingots and Castings - Specification	1997	Current	View →
IS 4994	Electroplated Coatings of Zinc on Iron and Steel - Specification	1996	Current	View →
IS 7138	Aluminium Alloy Die Castings	1994	Current	View →
IS 12444	Copper Tubes for Plumbing - Specification	1993	Current	View →
IS 404	Lead Pipes for Other than Chemical Purposes - Specification	1993	Current	View →

Soil and Foundation Engineering

46 codes

Related:Handbook (SBC)QA/QC Templates

Code	Title	Year	Status
IS 1080	Code of Practice For Design And Construction Of Shallow Foundations In Soils (Other Than Raft, Ring And Shell)	1985	Current	View →
IS 2809	Glossary of terms and symbols relating to soil engineering	1972	Current	View →
IS 2950	Code of practice for design and construction of raft foundations, Part 1: Design	2000	Current	View →
IS 9198	Guide for an undisturbed sampling of sands	1979	Current	View →
IS 9259	liquid limit apparatus for soils	1979	Current	View →
IS 9759	Guidelines for dewatering during construction	1981	Current	View →
IS 11594	mild steel thin-walled sampling tubes and sampler heads	1985	Current	View →
IS 12175	rapid moisture meter for rapid determination of water content in the soil	1987	Current	View →
IS 12287	consolidometer for determination of consolidation properties	1988	Current	View →
IS 13094	Selection of ground improvement techniques for foundation in weak soils -Guidelines	1992	Current	View →
IS 13468	Apparatus for determination of dry density of soil by core cutter method-	1992	Current	View →
IS 2810	Glossary of terms relating to soil dynamics	1979	Current	View →
IS 4091	Code of practice for design and construction of foundations for transmission line towers and poles	1979	Current	View →
IS 4332	Methods of test for stabilized soils, Part 1: Method of sampling and preparation of stabilized soils for testing	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 2: Determination of moisture content of stabilized soil mixtures	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 3: Test for determination of moisture content-dry density relation for stabilized soil mixtures	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 4: Wetting and drying, and freezing and thawing tests for compacted soil-cement mixtures	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 5: Determination of unconfined compressive strength of stabilized soils	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 6: Flexural strength of soil-cement using a simple beam with third-point loading	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 7: Determination of cement content of cement stabilized soils	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 8: Determination of lime content of lime stabilized soils	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 9: Determination of the bituminous stabilizer content of bitumen and tar-stabilized soils	2000	Current	View →
IS 4332	Methods of test for stabilized soils, Part 10: Test for soil-bituminous mixtures	2000	Current	View →
IS 4434	Code of practice for in-situ vane shear test for soils	1978	Current	View →
IS 5249	Determination of dynamic properties of soil - Method of test	1992	Current	View →
IS 9556	Code of practice for design and construction of diaphragm walls	1980	Current	View →
IS 9669	CBR moulds and their accessories	1980	Current	View →
IS 9716	Guide for lateral dynamic load test on piles	1981	Current	View →
IS 10077	equipment for determination of shrinkage factors	1982	Current	View →
IS 10108	Code of practice for a sampling of soils by thin wall sampler with stationary piston	1982	Current	View →
IS 10270	Guidelines for the design and construction of prestressed rock anchors	1982	Current	View →
IS 10442	earth augers (Spiral type)	1983	Current	View →
IS 10589	equipment for subsurface sounding of soils	1983	Current	View →
IS 10837	moulds and accessories for determination of density index (relative density) of cohesionless soils	1984	Current	View →
IS 11089	Code of practice for design and construction of ring foundation	1984	Current	View →
IS 11196	equipment for determination of liquid limit of soils cone penetration method	1985	Current	View →
IS 11209	mould assembly for determination of permeability of soils	1985	Current	View →
IS 11229	shear box for testing soils	1985	Current	View →
IS 11233	Code of practice for design and construction of radar antenna, microwave and TV tower foundations	1985	Current	View →
IS 11550	Code of practice for field instrumentation of swelling pressure in expansive souls code of practice for field instrumentation of swelling pressure in expansive soils	1985	Current	View →
IS 11593	shear box (large) for testing soils	1986	Current	View →
IS 11629	Code of practice for installation and operation of the single-point hydraulic over-flow setting gauge	1986	Current	View →
IS 12023	Code of practice for field monitoring of movement of structures using tape extensometer	1987	Current	View →
IS 12208	Method for measurement of earth pressure by a hydraulic pressure cell	1987	Current	View →
IS 12979	Mould for determination of linear shrinkage -	1990	Current	View →
IS 13301	Vibration isolation for machine foundations - Guidelines	1992	Current	View →

Timber and Timber Stores

130 codes

Code	Title	Year	Status
IS 6534	Guiding principles for grading and inspection of timber	1971	Current	View →
IS 11215	The moisture content of timber and timber products- Methods for determination	1991	Current	View →
IS 12896	Indian timbers for door and window shutters and frames- Classification	1990	Current	View →
IS 190	Coniferous Sawn Timber (Baulks and Scantlings)	1991	Current	View →
IS 656	Logs for Plywood	1988	Current	View →
IS 707	Timber Technology And Utilization of Wood, Bamboo and Cane - Glossary of Terms	2011	Current	View →
IS 876	Wood Poles for Overhead Power And Telecommunication Lines	1992	Current	View →
IS 1140	logs for matches	1988	Current	View →
IS 1141	Seasoning of timber- Code of practice	1993	Current	View →
IS 1150	Trade names and abbreviated symbols for timber species	2000	Current	View →
IS 1326	Non-coniferous sawn timber (Baulks and scantlings)	1992	Current	View →
IS 1331	cut sizes of timber	1971	Current	View →
IS 1503	wooden packing cases	1988	Current	View →
IS 1707	wood wool for general packaging purposes	1979	Current	View →
IS 1898	Timber for aircraft construction in converted form (finished form)	1990	Current	View →
IS 1900	Methods of tests for wood poles	1974	Current	View →
IS 1902	Preservation of bamboo and cane for non-structural purposes - Code of practice	2006	Current	View →
IS 2133	wooden tent pins	1983	Current	View →
IS 2179	converted timber for lorry bodies	1979	Current	View →
IS 2372	Timber for cooling towers	2004	Current	View →
IS 2377	Tables for volumes of cut sizes of timber	1967	Current	View →
IS 2408	Methods of static tests of timber in structural sizes	1963	Current	View →
IS 2455	Method of sampling of model trees and logs and their conversion for timber testing	1990	Current	View →
IS 2674	battened plywood cases	1988	Current	View →
IS 2683	Guide for installation of impregnation plants for timber	1980	Current	View →
IS 2753	Methods for estimation of preservatives in treated timber and in treating solutions, Part 1: Determination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil	2000	Current	View →
IS 2753	Methods for estimation of preservatives in treated timber and in treating solutions, Part 2: Determination of copper (in copper organic preservative salt) and pentachlorophenol	2000	Current	View →
IS 2891	wooden handles for felling axes and hand axes	1975	Current	View →
IS 2892	Wooden handles for picks and beaters	1993	Current	View →
IS 2893	Wooden handles for adzes	1992	Current	View →
IS 2895	Wooden handles for rasps, engineers' files and engineers' scrapers-	1990	Current	View →
IS 3071	wooden crates	1981	Current	View →
IS 3084	Pencil slats	1989	Current	View →
IS 3337	bullies for general purposes	1978	Current	View →
IS 3364	Methods of measurement and evaluation of defects in timber, Part 1: Logs	2000	Current	View →
IS 3364	Methods of measurement and evaluation of defects in timber, Part 2: Converted timber	2000	Current	View →
IS 3728	wooden boxes for packaging apples	1985	Current	View →
IS 3731	teak squares	1985	Current	View →
IS 4422	willow clefts for cricket bats	1985	Current	View →
IS 4424	timber for use in coal mines	1967	Current	View →
IS 4833	Methods for field testing of preservatives in wood	1993	Current	View →
IS 4873	Methods of laboratory testing of wood preservatives against fungi and borers (powder post beetles) : Part 1 Determination of threshold values of wood preservatives against fungi	2000	Current	View →
IS 4873	Methods of laboratory testing of wood preservatives against fungi and borers (powder post beetles) : Part 2 Determination of threshold values of wood preservatives against borers (powder post beetles)	2000	Current	View →
IS 4895	teak logs	1985	Current	View →
IS 4907	Method of testing timber connector joints	2004	Current	View →
IS 4953	Wooden handles for hand hammers-	1989	Current	View →
IS 4970	Critical for identification of commercial timbers	1973	Current	View →
IS 5246	Coniferous logs	2000	Current	View →
IS 5247	converted timber (coniferous): Part 1 Light furniture	2000	Current	View →
IS 5247	converted timber (coniferous): Part 2 Packing cases and crates	2000	Current	View →
IS 5942	Wooden handles for POWRAHS	1989	Current	View →
IS 5966	Non-coniferous timber in converted form for general purposes	1993	Current	View →
IS 5978	Code of practice for the design of wood poles for overhead power and telecommunication lines	1970	Current	View →
IS 6341	Method of laboratory test for the efficacy of wood preservatives against soft rot	1971	Current	View →
IS 6346	Method of tests for timber props for mines	1971	Current	View →
IS 6497	Method of test for the efficacy of preservatives and evaluating the natural durability of timbers used in cooling towers	1990	Current	View →
IS 6641	wooden discs for tents	1985	Current	View →
IS 6642	mason's mallets	1986	Current	View →
IS 6644	tinman's mallets	1986	Current	View →
IS 6656	caulking mallets	1986	Current	View →
IS 6662	Timber species suitable for wooden packaging -	1993	Current	View →
IS 6676	bossing (plumbers), mallets	1986	Current	View →
IS 6703	Glossary of wooden packaging terms	1972	Current	View →
IS 6707	willow logs for artificial limbs	1972	Current	View →
IS 6711	Code of practice for maintenance of wood poles for overhead power and telecommunication lines	1972	Current	View →
IS 6791	Method of testing natural durability of timber and efficacy of the wood preservatives against marine borers	1973	Current	View →
IS 6874	Method of tests for bamboo	2008	Current	View →
IS 7308	Non-coniferous logs	1999	Current	View →
IS 7315	Guidelines for design, installation and testing of timber seasoning kilns (Compartment type with cross-forced air circulation)	1974	Current	View →
IS 7344	bamboo tent poles	1974	Current	View →
IS 7549	timber half-wrought for sporting rifles	1975	Current	View →
IS 7698	returnable wooden crates for vegetables	1983	Current	View →
IS 7850	wooden box for microscope slides	1975	Current	View →
IS 7992	plywood cases for packing tobacco for export	1983	Current	View →
IS 8242	Methods of tests for split bamboo	1976	Current	View →
IS 8292	Evaluation of working quality of timber under different woodworking operations- Method of test	1992	Current	View →
IS 8295	bamboo chicks, Part 1: Fine	2000	Current	View →
IS 8295	bamboo chicks, Part 2: Coarse	2000	Current	View →
IS 8720	Methods of sampling of timber scantlings from depots and their conversion for testing	1978	Current	View →
IS 8725	rebound wooden boxes	1978	Current	View →
IS 8726	rebound wooden crates	1978	Current	View →
IS 8745	Methods of presentation of data on physical and mechanical properties of timber	1994	Current	View →
IS 9096	Preservation of bamboo for structural purposes - Code of practice	2006	Current	View →
IS 9104	Guide for storage and protection of logs and sawn timber	1979	Current	View →
IS 9561	Code of practice for felling and conversion of trees into logs	1985	Current	View →
IS 9576	Guide for mill sawing of timber	1980	Current	View →
IS 9590	non-returnable wooden boxes for horticulture produce	1980	Current	View →
IS 10013	water-soluble type wood preservatives, Part 1: Acid-copper-chrome (ACC) preservative	2000	Current	View →
IS 10013	water-soluble type wood preservatives, Part 2: Copper-chrome-arsenic (CCA) wood preservative	2000	Current	View →
IS 10013	water-soluble type wood preservatives, Part 3: Copper-chrome-boron (CCB) wood preservative	2000	Current	View →
IS 10394	wooden sleepers for railway track	1982	Current	View →
IS 10402	pin-needle hardboard boxes for packaging apples	1982	Current	View →
IS 10420	Method of determination of sound absorption coefficient of timber by standing wave method	1982	Current	View →
IS 10687	Guidelines for nailing of large framed wooden containers	1983	Current	View →
IS 10753	Code of practice for preservation of wooden sleepers for railway track by pressure treatment	1983	Current	View →
IS 10754	Method of determination of thermal conductivity of timber	1983	Current	View →
IS 11106	carpenter's mallets	1984	Current	View →
IS 11131	wooden casks and barrels	1984	Current	View →
IS 11288	Recommendations for off-road transportation of timber	1985	Current	View →
IS 13621	Determination of dielectric constant of wood under microwave frequencies- Method of test	1993	Current	View →
IS 13622	Indian timbers for furniture and cabinets- Classification	1993	Current	View →
IS 14960	Preservative-treated and seasoned sawn timber from rubber wood (Hevea Brasiliensis)	2001	Current	View →
IS 15455	Grading rules for split canes	2004	Current	View →
IS 15456	Grading rules for unsplit canes	2004	Current	View →
IS 15457	Logs for production of sliced veneers	2004	Current	View →
IS 15458	Classification of Indian canes and their zonal distribution	2004	Current	View →
IS 15890	Design, Installation and Testing of Solar Timber Seasoning Kiln - Guidelines	2010	Current	View →
IS 10	Plywood Tea Chests: Part-1 General	2000	Current	View →
IS 10	Plywood Tea Chests: Part-2 Plywood	2000	Current	View →
IS 10	Plywood Tea-Chests: Part-3 Battens	2000	Current	View →
IS 10	Plywood Tea Chests: Part-4 Metal Fittings	2000	Current	View →
IS 10	Plywood Tea Chests, Part 5: Assembly and Packing	2000	Current	View →
IS 620	Wooden Tool Handles General Requirements	1985	Current	View →
IS 2203	Wooden cross arms	1993	Current	View →
IS 2894	wooden handles for woodworking chisels and gouges	1987	Current	View →
IS 2896	wooden handles for carpenters' augers	1978	Current	View →
IS 2897	wooden handles for shovels	1983	Current	View →
IS 2922	wooden tent mallets	1975	Current	View →
IS 3053	cane baskets for general purposes	1977	Current	View →
IS 3386	wooden fence posts	1979	Current	View →
IS 3806	wooden beaters	1966	Current	View →
IS 4423	Hand-sawing of timber - Guide	1999	Current	View →
IS 4650	wooden anvil blocks	1968	Current	View →
IS 6056	jointed wood poles for overhead power and telecommunication lines	1970	Current	View →
IS 6643	wooden pins for bivouac tents	1987	Current	View →
IS 6729	wooden paddles	1972	Current	View →
IS 7548	Vase for store tent	1992	Current	View →
IS 8001	packaging of plywood, blockboards and flush doors for export	1976	Current	View →
IS 10145	bamboo supports for camouflaging equipment	1982	Current	View →
IS 11100	sweeping brooms	1984	Current	View →

Timber and Wood

27 codes

Code	Title	Year	Status
IS 303	Plywood for General Purposes - Specification	1989	Current	View →
IS 710	Marine Plywood - Specification	2010	Current	View →
IS 1659	Blockboards - Specification	2004	Current	View →
IS 2202 Part 1	Wooden Flush Door Shutters (Solid Core Type) - Specification	1999	Current	View →
IS 2202 Part 2	Wooden Flush Door Shutters (Cellular and Hollow Core Type) - Specification	1999	Current	View →
IS 2209	Laminated Wood Products - Specification	1976	Current	View →
IS 3087	Particle Board (Medium Density) for General Purpose - Specification	2005	Current	View →
IS 3965	Plywood for Concrete Shuttering Work	2020	Current	View →
IS 4990	Plywood for Concrete Shuttering Work - Code of Practice	1993	Current	View →
IS 7638	Fibre Boards (Medium Density Fibreboard and Hardboard) - Specification	1999	Current	View →
IS 10701	Plywood for Concrete Shuttering Work - Specification	1996	Current	View →
IS 12823	Pre-laminated Particle Boards - Specification	2015	Current	View →
IS 287	Code of Practice for Design of Timber Structures	2022	Current	View →
IS 287	Code of Practice for Design of Timber Structures	1993	Superseded	View →
IS 399	Classification of Commercial Timbers and Their Zonal Distribution	1966	Current	View →
IS 401	Code of Practice for Preservation of Timber	2001	Current	View →
IS 883	Code of Practice for Design of Structural Timber in Buildings	1994	Current	View →
IS 1362	Structural Timber - Dimensions	1968	Current	View →
IS 1658	Fibre Hardboards - Specification	2006	Current	View →
IS 1708	Methods of Testing Small Clear Specimens of Timber	2014	Current	View →
IS 3629	Structural Timber - Use in Buildings - Code of Practice	1986	Current	View →
IS 4016 Part 1	Methods of Test for Fire Retardant Properties of Treated Timber - Crib Test	1984	Current	View →
IS 4016 Part 2	Methods of Test for Fire Retardant Properties of Treated Timber - Surface Spread of Flame Test	1984	Current	View →
IS 5437	Marine Plywood	2020	Current	View →
IS 5509	Fire Retardant Plywood - Specification	2000	Current	View →
IS 14275	Laminated Veneer Lumber (LVL) for Structural Purposes - Specification	1995	Current	View →
IS 2361	Particle Boards of Wood and Other Lignocellulosic Materials (for General Purposes) - Specification	1967	Current	View →

Insulation Materials

30 codes

Code	Title	Year	Status
IS 8183	Specification for rigid mineral wool thermal insulating materials	1993	Current	View →
IS 8229	Code of practice for thermal insulation of pipes, ducts and equipment	1994	Current	View →
IS 10909	Specification for expanded polystyrene (EPS) for thermal insulation	1984	Current	View →
IS 13666	Design and installation of thermal insulation for refrigeration and air conditioning systems - Code of practice	1993	Current	View →
IS 14214	Specification for glass wool thermal insulation materials	1995	Current	View →
IS 17409	Flexible Elastomeric Foams for Thermal Insulation - Specification	2020	Current	View →
IS 17430	Cellular rubber and plastic materials for thermal insulation of HVAC systems - Specification	2020	Current	View →
IS 17477	Polyethylene foam for thermal insulation - Specification	2020	Current	View →
IS 17533	Polyisocyanurate (PIR) foam for thermal insulation - Specification	2021	Current	View →
IS 3093	Bitumen based felts for thermal insulation	1987	Current	View →
IS 3144	Methods of test for thermal insulating materials	1992	Current	View →
IS 3346	Glossary of terms relating to thermal insulation	1980	Current	View →
IS 3690	Methods of test for preformed thermal insulating materials	1985	Current	View →
IS 4671	Specification for calcium silicate preformed thermal insulating materials	1980	Current	View →
IS 6481	Determination of thermal conductivity of thermal insulation materials (Guarded hot plate method)	1972	Current	View →
IS 6537	Code of practice for insulating cork slabs and pipe sections	1981	Current	View →
IS 6670	Code of practice for thermal insulation of buildings	1989	Current	View →
IS 7268	Recommended practice for hot application of thermal insulation	1993	Current	View →
IS 8617	Guide for selection of insulating materials for buildings	1994	Current	View →
IS 9789	Specification for rigid cellular phenolic foam for thermal insulation	1981	Current	View →
IS 9842	Code of practice for thermal insulation of cold storage	1981	Current	View →
IS 11206	Specification for extruded polystyrene (XPS) for thermal insulation	1985	Current	View →
IS 12436	Specification for rigid polyurethane (PU) foam for thermal insulation	1988	Current	View →
IS 13670	Specification for cellular glass preformed thermal insulation	1993	Current	View →
IS 14500	Code of practice for design and installation of suspended ceilings for acoustic and thermal insulation	1997	Current	View →
IS 14769	Reflective insulation materials	2000	Current	View →
IS 15093	Resilient sound absorbing materials for building applications - Specification	2002	Current	View →
IS 15474	Specification for rock wool thermal insulating materials	2004	Current	View →
IS 16010	Mineral wool boards/slabs for acoustic insulation - Specification	2012	Current	View →
IS 17351	Test methods for determining sound absorption coefficients of materials - Reverberation room method	2020	Current	View →

Cement Matrix Products

73 codes

Code	Title	Year	Status
IS 783	Code of Practice for Laying of Concrete Pipes	1985	Current	View →
IS 2572	Construction of hollow and solid concrete block masonry - Code of practice	2005	Current	View →
IS 6041	Code of practice for construction of autoclaved cellular concrete block masonry	1985	Current	View →
IS 6042	Code of practice for construction of lightweight concrete block masonry	1969	Current	View →
IS 9872	precast concrete septic tanks	1981	Current	View →
IS 784	Prestressed Concrete Pipes (Including Fittings)	2001	Current	View →
IS 785	Reinforced Concrete Poles for Overhead Power and Telecommunication Lines	1998	Current	View →
IS 1332	precast reinforced concrete street lighting poles	1986	Current	View →
IS 1678	Prestressed concrete poles for overhead power, traction and telecommunication lines	1998	Current	View →
IS 1916	Steel cylinder pipe with concrete lining and coating	1989	Current	View →
IS 2098	Asbestos cement building boards	1997	Current	View →
IS 2193	Precast Prestressed Concrete Street Lighting Poles	1986	Current	View →
IS 2905	Concrete poles for overhead power and telecommunication lines - Methods of test	1989	Current	View →
IS 3007	Laying of Asbestos Cement Sheets Code of practice, Part II: Semi-Corrugated Sheets	2000	Current	View →
IS 3597	Concrete pipes - Methods of test	1966	Current	View →
IS 3597	Concrete pipes - Methods of test	1998	Current	View →
IS 4350	concrete porous pipes for under-drainage	1967	Current	View →
IS 4996	reinforced concrete fence posts	1984	Current	View →
IS 5751	Precast Concrete Coping Blocks	1984	Current	View →
IS 5913	Asbestos Cement Products - Methods of Test	2003	Current	View →
IS 6523	Precast Reinforced Concrete Door and Window Frames	1983	Current	View →
IS 7319	perforated concrete pipes	1974	Current	View →
IS 7321	Code of practice for selection, handling and erection of concrete poles for overhead power and telecommunication lines	1974	Current	View →
IS 7322	specials for steel cylinder reinforced concrete pipes	1985	Current	View →
IS 7639	Methods of sampling of asbestos cement products	1975	Current	View →
IS 9375	precast reinforced concrete plant guards	1979	Current	View →
IS 9691	Method of test for length distribution (wet classification of fibre length) of chrysotile asbestos fibre using Bauer Mcnett classifier	1980	Current	View →
IS 9893	precast concrete blocks for lintels and sills	1981	Current	View →
IS 11239	Cellular Concrete Products	2007	Current	View →
IS 11267	Method of test for length distribution (wet classification of fibre length) of chrysotile asbestos fibre using Turner and Newall classifier	1985	Current	View →
IS 11275	Method of test for determination of crudeness and grit content of asbestos fibre	1985	Current	View →
IS 11276	Method of test for determination of openness or fiberization of chrysotile asbestos fibre by air permeability method using rapid surface area apparatus	1985	Current	View →
IS 11450	Method for Determination of Airborne Asbestos Fibre Concentration in Work Environment by Light Microscopy (Membrane Filter Method)	2006	Current	View →
IS 11451	Recommendations for Safety and Health Requirements Relating to Occupational Exposure to Asbestos	1986	Current	View →
IS 11707	Glossary of terms relating to asbestos	1986	Current	View →
IS 11767	Recommendations for cleaning of premises and plants using asbestos fibres	2005	Current	View →
IS 11768	Recommendations for disposal of asbestos waste material	1986	Current	View →
IS 11769	Guidelines for safe use of products containing asbestos, Part 1: Asbestos cement products	2000	Current	View →
IS 11769	Guidelines for safe use of products containing asbestos, Part 2: Friction materials	2000	Current	View →
IS 11769	Guidelines for safe use of products containing asbestos, Part 3: Non-cement asbestos products other than friction materials	2000	Current	View →
IS 11770	Recommendations for control of emission of asbestos dust in premises manufacturing products containing asbestos, Part 1: Asbestos cement products	2000	Current	View →
IS 11770	Recommendations for control of emission of asbestos dust in premises manufacturing products containing asbestos, Part 2: Friction materials	2000	Current	View →
IS 11770	Recommendations for control of emission of asbestos dust in premises manufacturing products containing asbestos, Part 3: Non-cement asbestos products other than friction materials	2000	Current	View →
IS 12078	Recommendations for personal protection of workers engaged in handling asbestos	1987	Current	View →
IS 12079	Recommendations for packaging, transport and storage of asbestos	1987	Current	View →
IS 12080	Recommendations for local exhaust ventilation systems in premises manufacturing products containing asbestos	1987	Current	View →
IS 12081	Recommendations for pictorial warning signs and precautionary notices for asbestos and products containing asbestos, Part 1: Workplaces	2000	Current	View →
IS 12081	Recommendations for Pictorial Warning Signs and Precautionary Notices for Asbestos and Products Containing Asbestos, Part 2: Asbestos and its Products	2000	Current	View →
IS 12082	Control of asbestos emission - Recommendations, Part 1: Mining of asbestos ore	2000	Current	View →
IS 12082	Control of Asbestos Emission - Recommendations, Part 2: Milling of Asbestos Ore	2000	Current	View →
IS 12440	precast concrete stone masonry blocks	1988	Current	View →
IS 13158	Prestressed concrete circular spun poles for overhead power, traction and telecommunication lines	1991	Current	View →
IS 13356	Precast Ferro cement water tanks up to 10000 litres capacity	1992	Current	View →
IS 14871	Products in Fibre Reinforced Cement - Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding	2000	Current	View →
IS 15155	Bar/Wire Wrapped Steel Cylinder Pipes With Mortar lining and Coating (Including Specials)	2002	Current	View →
IS 1592	Asbestos Cement Pressure Pipes and Joints	2003	Current	View →
IS 1626	Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings, Part 1: Pipe and pipe fittings	2000	Current	View →
IS 1626	Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings, Part 2: Gutter and gutter fittings )	2000	Current	View →
IS 1626	Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings, Part 3: Roofing Fittings	2000	Current	View →
IS 2096	Asbestos cement flat sheets	1992	Current	View →
IS 2174	reinforced concrete dust bins	1962	Current	View →
IS 3007	Laying of Asbestos Cement Sheets - Code of Practice, Part 1: Corrugated Sheets	2000	Current	View →
IS 3632	Method of test for determination of the wet volume of asbestos fibre	1969	Current	View →
IS 4844	Method of sampling and preparation of asbestos fibre for laboratory test purposes	1968	Current	View →
IS 5328	Method of test for determination of the chemical composition of asbestos fibre	1969	Current	View →
IS 5748	Methods of test for tensile strength of asbestos fibre	1969	Current	View →
IS 6908	asbestos cement pipes and fittings for sewerage and drainage	1991	Current	View →
IS 8870	Asbestos Cement Cable Conduits and Troughs	1978	Current	View →
IS 9627	asbestos cement pressure pipes (light duty)	1980	Current	View →
IS 9690	Method of test for determination of openness or fabrication of chrysotile asbestos fibre by air permeability method using Dyckerhoff apparatus	1980	Current	View →
IS 9745	Method for determining strength-giving properties of asbestos fibre	1981	Current	View →
IS 13000	Silica-asbestos-cement Flat Sheets	1990	Current	View →
IS 13008	Shallow corrugated asbestos cement sheets	1990	Current	View →

Builder Hardware

39 codes

Code	Title	Year	Status
IS 204	Tower Bolts - Specification: Part-1 Ferrous Metals	2000	Current	View →
IS 1341	Steel butt hinges	1992	Current	View →
IS 6315	Floor springs (hydraulically regulated) for heavy doors	1992	Current	View →
IS 7196	Specification for hold fast	1974	Current	View →
IS 12817	Stainless steel butt hinges - Specification	1997	Current	View →
IS 12817	Stainless steel butt hinges - Specification	2013	Current	View →
IS 15833	Stainless steel tower bolts -Specification	2009	Current	View →
IS 204	Tower Bolts - Specification Part-2 Non-Ferrous Metals	2000	Current	View →
IS 208	Door Handles -Specification	1996	Current	View →
IS 273	Sash Balances (Spring Type)	2019	Current	View →
IS 281	Mild Steel Sliding Door Bolts for Use With Padlocks -Specification	2009	Current	View →
IS 364	Fanlight Catch -Specification	1993	Current	View →
IS 453	Double Acting Spring Hinges -Specification	1993	Current	View →
IS 1019	Specification For Rim Latches	1974	Current	View →
IS 1823	Specification for floor door stoppers	1980	Current	View →
IS 2681	Non-ferrous metal sliding door bolts (drops) with padlocks -Specification	1993	Current	View →
IS 3564	Hydraulically Regulated Door Closers -Specification	1995	Current	View →
IS 3818	Continuous (Piano) hinges -Specification	1992	Current	View →
IS 3843	Steel back flap hinges -Specification	1995	Current	View →
IS 4621	Specification for indicating bolts for use in public baths and lavatories	1975	Current	View →
IS 4992	Specification for door handles for mortice lock (vertical type)	1975	Current	View →
IS 5187	Specification for flush bolts	1972	Current	View →
IS 5899	Specification - bath-room latches	1970	Current	View →
IS 7197	Specification for double action floor springs (without oil check) heavy door	1974	Current	View →
IS 7534	Specification for sliding locking bolts for use with padlocks	1985	Current	View →
IS 8756	Specification for mortice ball catches for use in the wooden almirah	1978	Current	View →
IS 9106	Specification for rising butt hinges	1979	Current	View →
IS 9460	Specification for Flush Drop Handle for Drawers	1980	Current	View →
IS 9899	Specification for hat, coat and wardrobe hooks	1981	Current	View →
IS 10019	Specification for mild steel stays and fasteners	1981	Current	View →
IS 10090	Specification for numerical	1982	Current	View →
IS 10342	Specification for the curtain rail system	1982	Current	View →
IS 12867	PVC Handrail Covers - Specification	1989	Current	View →
IS 14912	Door Closers, Concealed Type (Hydraulically Regulated)	2001	Current	View →
IS 15834	Stainless Steel Sliding Door Bolts for use with Padlocks - Specification	2008	Current	View →
IS 15834	Stainless steel sliding door bolts for use with padlocks -Specification Bilingual)	2000	Current	View →
IS 452	Door Spring, Rat-Tail Type - Specification	1973	Current	View →
IS 1837	Specification for fanlight pivots	1966	Current	View →
IS 3828	Specification for ventilator chains	1966	Current	View →

Planning, Housing and Pre-fabricated Construction

45 codes

Code	Title	Year	Status
IS 962	Code of practice for architectural and building drawings	1989	Current	View →
IS 7922	Recommendations for modular coordination in the building industry: Vertical co-ordination	1987	Current	View →
IS 7973	Code of practice for architectural and building working drawings	1976	Current	View →
IS 10600	Recommendations for modular coordination - principles and rules	1983	Current	View →
IS 13612	Modular co-ordination for normal brickwork - Recommendations, Part 1: Burnt clay bricks	2000	Current	View →
IS 15917	Building Design and Erection Using Mixed/Composite Construction - Code of practice	2010	Current	View →
IS 1553	Design of Library Buildings - Recommendations Relating to its Primary Elements	1989	Current	View →
IS 2663	Design of buildings for archives - Recommendations relating to its primary elements	1989	Current	View →
IS 3201	Criteria for design and construction of precast trusses and purlins	1988	Current	View →
IS 4878	Byelaws for the construction of cinema buildings	1986	Current	View →
IS 4919	Glossary of terms applicable to landscape and horticulture work	1981	Current	View →
IS 4993	Glossary of terms relating to modular coordination	1983	Current	View →
IS 5197	Recommendations for layout and planning of drawings offices	1987	Current	View →
IS 6072	autoclaved reinforced cellular concrete wall slabs	1971	Current	View →
IS 6073	Autoclaved reinforced cellular concrete floor and roof slabs	2006	Current	View →
IS 6408	Recommendations for Modular Co-ordination in Building Industry: Tolerances, Part 1: Glossary of Terms	2000	Current	View →
IS 6408	Recommendations for modular coordination in the building industry: Tolerances, Part 2: Principles and applications	2000	Current	View →
IS 6408	Recommendations for modular coordination in the building industry: Applications	2000	Current	View →
IS 7564	Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and assemblies, Part 1: Functional group 1 Structures	2000	Current	View →
IS 7564	Recommendations for co-ordination of dimensions in buildings-Arrangement of building components and assemblies, Part 2: Functional group 2 External envelope	2000	Current	View →
IS 7564	Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and assemblies, Part 3: Functional group 3 internal subdivision	2000	Current	View →
IS 7564	Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and assemblies, Part 4: Functional group 4 services and drainage	2000	Current	View →
IS 7564	Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and assemblies, Part 5: Functional group 5 Fixtures, furniture and equipment	2000	Current	View →
IS 7921	Recommendations for modular coordination in the building industry: Horizontal co-ordination	1987	Current	View →
IS 8338	Recommendations relating to primary elements in the design of school library buildings	1976	Current	View →
IS 8888	Guide for requirements of low-income housing, Part 1: Urban areas	2000	Current	View →
IS 10297	Code of practice for design and construction of floors and roofs using precast reinforced/prestressed concrete ribbed or cored slab unit	1982	Current	View →
IS 10316	Recommendations for modular co-ordination: basic module and submodular increments (Equivalent to ISO 1006 and ISO 651: 1982)	1986	Current	View →
IS 10505	Code of practice for construction of floors and roofs using precast concrete waffle units	1983	Current	View →
IS 11447	Code of practice for construction with large panel prefabricates	1985	Current	View →
IS 11775	Recommendations for modular co-ordination: notations and symbols for modular drawings	1986	Current	View →
IS 12073	Recommendations for modular co-ordination: Co-ordinating sizes for door sets and window sets	1987	Current	View →
IS 13613	Recommendations for modular coordination in the building industry: Location of structural walls and floor slabs	1992	Current	View →
IS 13727	Guide for requirements of cluster planning for housing	1993	Current	View →
IS 13990	precast reinforced concrete planks and joists for roofing and flooring	1994	Current	View →
IS 13994	Design and Construction of Floor and Roof with Precast Reinforced Concrete Planks and Joists - Code of Practice	1994	Current	View →
IS 14142	Code of practice for design and construction of floors and roofs with prefabricated brick panel	1994	Current	View →
IS 14143	prefabricated brick panel and partially precast concrete joist for flooring and roofing	1994	Current	View →
IS 14201	precast reinforced concrete channel units for the construction of floors and roofs	1994	Current	View →
IS 14213	Code of practice for construction of walls using precast concrete stone masonry blocks	1994	Current	View →
IS 14215	Design and Construction of Floors and Roofs with Precast Reinforced Concrete Channel Units - Code of Practice	1994	Current	View →
IS 14241	Precast Reinforced Concrete L-panel for Roofing	1995	Current	View →
IS 14242	Code of practice for design and construction of roof with L-Panel units	1995	Current	View →
IS 2661	mobile library van	1978	Current	View →
IS 2662	packages for use of libraries	1978	Current	View →

Wood and Other Lignocellulosic Products

49 codes

Code	Title	Year	Status
IS 12406	Medium Density Fibre Boards for General Purpose -Specification	2003	Current	View →
IS 14315	Commercial veneers -Specification	1995	Current	View →
IS 14587	Prelaminated medium density fibre board -Specification	1998	Current	View →
IS 15512	Selection and Use of Various Types of Medium-Density Fibre Boards - Code of Practice	2004	Current	View →
IS 15932	Selection and Use of various types of Lignocellulosic Panel Products - Code of Practice, Part 1: Medium-Density Particle Boards	2000	Current	View →
IS 848	Specification for Synthetic Resin Adhesives for Plywood (Phenolic And Aminoplastic)	2006	Current	View →
IS 851	Specification for Synthetic Resin Adhesives For Construction Work (Non-Structural) in Wood	1978	Current	View →
IS 852	Animal Glue For General Wood-Working Purposes -Specification	1994	Current	View →
IS 1328	Veneered Decorative Plywood -Specification	1996	Current	View →
IS 1508	Extenders for Use in Synthetic Resin Adhesives (Urea-formaldehyde) for Plywood- Code of Practice	1972	Current	View →
IS 1734	Methods of test for plywood	2000	Current	View →
IS 2380	Methods of Test for Wood Particle Boards and Boards from Other Lignocellulosic Materials	2000	Current	View →
IS 2380	Method of test for wood particle boards and boards from other lignocellulosic materials, Part 22: Determination of surface glue ability test	2000	Current	View →
IS 2380	Method of test for wood particle boards and boards from other lignocellulosic materials, Part 23: Vibration tests for particle boards	2000	Current	View →
IS 3097	Veneered Particle Boards -Specification	2006	Current	View →
IS 3129	Specification for low-density particle boards	1985	Current	View →
IS 3308	Specification for wood wool building slabs	1981	Current	View →
IS 3348	Specification for fibre insulation boards	1965	Current	View →
IS 3478	Specification for High-Density Wood Particle Boards	1966	Current	View →
IS 3513	Resin-treated compressed wood laminates (compregs) - Specification, Part 1: For electrical purposes	2000	Current	View →
IS 3513	Resin-treated compressed wood laminates (compregs) - Specification, Part 2: For chemical purposes	2000	Current	View →
IS 3513	Resin Treated Compressed Wood Laminates (Compregs) - Specification, Part 3: For General Purposes	2000	Current	View →
IS 3513	Resin Treated Compressed Wood Laminates (Compregs) - Specification, Part 4: Sampling and tests	2000	Current	View →
IS 4835	Specification Polyvinyl Acetate Dispersion-Based Adhesives for Wood	1979	Current	View →
IS 4859	high strength aircraft plywood	1968	Current	View →
IS 5539	Specification for preservative-treated plywood	1969	Current	View →
IS 7316	Specification for decorative plywood using a plurality of veneers for decorative faces	1974	Current	View →
IS 9188	Performance requirements for adhesive for structural laminated wood products for use under exterior exposure conditions	1979	Current	View →
IS 9307	Methods of Test for Wood-based Structural Sandwich Construction	2000	Current	View →
IS 12053	Code of practice for the preparation and application of putty for repairing plywood and other wood-based panels	1987	Current	View →
IS 12077	Code of practice for testing of timbers for plywood manufacture	1987	Current	View →
IS 12120	Code of practice for preservation of plywood and other panel products	1987	Current	View →
IS 13745	Method for determination of formaldehyde content in particle board by extraction method called perforator method	1993	Current	View →
IS 13957	Metal-faced plywood -Specification	1994	Current	View →
IS 13958	Bamboo mat board for general purposes -Specification	1994	Current	View →
IS 14276	Cement bonded particle boards -Specification	1995	Current	View →
IS 14588	Bamboo mat veneer composite for general purposes -Specification	1999	Current	View →
IS 14616	Laminated veneer lumber - Specification	1999	Current	View →
IS 14842	Coir Veneer Board for General Purposes -Specification	2000	Current	View →
IS 15476	Bamboo Mat Corrugated Sheets -Specification	2004	Current	View →
IS 15491	Medium Density Coirboards for General Purposes	2004	Current	View →
IS 15786	Prelaminated cement bonded particle board -Specification	2008	Current	View →
IS 15791	Museum plywood -Specification	2007	Current	View →
IS 15877	Coir Faced Block Boards -Specification	2010	Current	View →
IS 15878	Coir Hardboard for General Purposes -Specification	2010	Current	View →
IS 15972	Bamboo-Jute Composite Corrugated and Semi-Corrugated Sheets - Specification	2012	Current	View →
IS 15973	Selection and Use of Various Types of Lignocellulosic Panel Products - Code of Practice, Part 2: Hardboards	2000	Current	View →
IS 652	Wooden Separators for Lead-Acid Storage Batteries	1960	Current	View →
IS 709	Specification for Medium Strength Aircraft Plywood	1974	Current	View →

Flooring, Wall Finishing and Roofing

50 codes

Code	Title	Year	Status
IS 1661	Code of practice for the application of cement and cement-lime plaster finishes	1972	Current	View →
IS 2402	Code of Practice for External Rendered Finishes	1963	Current	View →
IS 4971	Recommendations for selection of industrial floor finishes	2007	Current	View →
IS 13801	Checkered cement concrete tiles	1993	Current	View →
IS 13801	Checkered cement concrete tiles - Specification	2013	Current	View →
IS 653	Linoleum Sheets And Tiles	1992	Current	View →
IS 809	Rubber Flooring Materials For General Purposes	1992	Current	View →
IS 1195	Bitumen-Mastic for Flooring	2002	Current	View →
IS 1196	Code of practice for laying bitumen mastic flooring	1978	Current	View →
IS 1197	Code of practice for laying rubber floors	1970	Current	View →
IS 1630	mason's tools for plaster work and pointing work	1984	Current	View →
IS 2114	Code of practice for laying in-situ terrazzo floor finish	1984	Current	View →
IS 2394	Code of practice for the application of lime plaster finish	1984	Current	View →
IS 3462	unbacked flexible PVC flooring	1986	Current	View →
IS 3464	Methods of Test for Plastic Flooring and Wall Tiles	1986	Current	View →
IS 4441	Code of practice for the use of silicate-type chemical-resistant mortars	1980	Current	View →
IS 4442	Code of practice for the use of sulphur-type chemical-resistant mortars	1980	Current	View →
IS 4443	Code of practice for the use of resin-type chemical-resistant mortars	1980	Current	View →
IS 4456	Methods of Test for Chemical Resistant Mortars, Part I: Silicate Type and Resin Type	2000	Current	View →
IS 4456	Methods of test for chemical resistant mortars, Part II: Sulphur type	2000	Current	View →
IS 4457	Ceramic unglazed vitreous acid-resisting tile	2007	Current	View →
IS 4631	Code of practice for laying epoxy resin floor toppings	1986	Current	View →
IS 4832	chemical resistant mortars, Part I: Silicate type	2000	Current	View →
IS 4832	Chemical Resistant Mortars, Part II: Resin type	2000	Current	View →
IS 4832	chemical resistant mortars, Part III: Sulphur type	2000	Current	View →
IS 5317	Pitch-Mastic for Bridge Decking and Roads	2002	Current	View →
IS 5318	Code of practice for laying flexible PVC sheets and tile flooring	1969	Current	View →
IS 5491	Code of practice for laying of in-situ granolithic concrete floor topping	1969	Current	View →
IS 5766	Code of practice for laying burnt clay brick flooring	1970	Current	View →
IS 6278	Code of Practice for Whitewashing and Colour-washing	1971	Current	View →
IS 7956	Recommendations for selection of dairy floor finishes	1975	Current	View →
IS 8374	Bitumen Mastic, Anti-Static and Electrically Conducting Grade	1977	Current	View →
IS 9162	Methods of Tests for Epoxy Resins, Hardeners and Epoxy Resin Compositions for Floor Topping	1979	Current	View →
IS 9197	epoxy resin, hardeners and epoxy resin compositions for floor topping	1979	Current	View →
IS 9704	Methods of tests for linoleum sheets and tiles	1980	Current	View →
IS 10132	Method of Test for Materials for Use in the Preparation of Magnesium Oxychloride Flooring Compositions	1982	Current	View →
IS 10403	Glossary of terms relating to building finishes	1983	Current	View →
IS 12583	corrugated bitumen roofing sheets	1988	Current	View →
IS 12866	plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)	1989	Current	View →
IS 13026	bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products	1991	Current	View →
IS 13074	Code of practice for laying bitumen mastic flooring for industries handling LPG and other light hydrocarbon products	1991	Current	View →
IS 15193	Laying of Pitch-Mastic Flooring for Industries Handling Heavy Hydrocarbon Products Like Kerosene, Diesel and Furnace Oil - Code of Practice	2002	Current	View →
IS 15194	Pitch-Mastic Flooring for Industries Handling Heavy Hydrocarbon Products Like Kerosene, Diesel and Furnace Oil	2002	Current	View →
IS 15224	Laying of Plastic Translucent Sheets Made from Thermosetting Polyester Resin (Glass Fibre Reinforced) Alone or in Conjunction with Asbestos Cement Sheets/Steel Sheets/Aluminium Sheets - Code of Practice	2002	Current	View →
IS 15401	Wall Coverings in Roll Form - Vocabulary and Symbols	2003	Current	View →
IS 15418	Wall Coverings in Roll form for Finished Wall Papers, Wall Vinyls and Plastic Wall Coverings	2003	Current	View →
IS 657	Materials for Use In The Manufacture of Magnesium Oxychloride Flooring Compositions	1982	Current	View →
IS 658	Code of Practice for Magnesium Oxychloride Composition Floors	1982	Current	View →
IS 1198	Code of practice for laying, fixing and maintenance of linoleum floor	1982	Current	View →
IS 3461	PVC-asbestos floor tiles	1980	Current	View →

Scaffolding, Formwork and Construction Equipment

19 codes

Code	Title	Year	Status
IS 2750	Steel Scaffoldings - Specification	1964	Current	View →
IS 5892	Transit Mixers for Concrete - Specification	1970	Current	View →
IS 8769	Safety Nets for Construction Work - Specification	1978	Current	View →
IS 9494	Concrete Formwork - Code of Practice for Safety	1980	Current	View →
IS 10792	Recommendations for Formwork for Concrete	1984	Current	View →
IS 15647	Timber Formwork for Concrete - Code of Practice	2006	Current	View →
IS 16744	Design and Construction of Formwork Using Proprietary Systems - Code of Practice	2018	Current	View →
IS 1791	Batch Type Concrete Mixers - Specification	1968	Current	View →
IS 2435	Continuous Type Concrete Mixers - Specification	1971	Current	View →
IS 2505	Concrete Vibrators, Immersion Type (Internal Vibrators) - Specification	1992	Current	View →
IS 2506	Concrete Vibrators, External Type - Specification	1985	Current	View →
IS 2514	Concrete Vibrators, Vibrating Tables - Specification	1963	Current	View →
IS 3366	Concrete Vibrators, Platform Type - Specification	1965	Current	View →
IS 4651	Screed Board Vibrators for Concrete - Specification	1968	Current	View →
IS 4654	Pan Type Concrete Mixers - Specification	1968	Current	View →
IS 4925	Concrete Batching and Mixing Plants - Specification	2004	Current	View →
IS 12159	Concrete Vibrators - Mechanical Poker Type - Safety Requirements	1987	Current	View →
IS 13915	Prefabricated Steel Modular Scaffolds - Specification	1994	Current	View →
IS 15099	Permanent Steel Formwork for Concrete Construction - Code of Practice	2002	Current	View →

Aggregates and Sand

19 codes

Code	Title	Year	Status
IS 1542	Crushed Stone Fine Aggregate for Use in Construction - Specification	1992	Current	View →
IS 2386 Part 2	Methods of Test for Aggregates for Concrete - Part 2: Estimation of Deleterious Materials and Organic Impurities	1963	Current	View →
IS 2386 Part 5	Methods of Test for Aggregates for Concrete - Part 5: Soundness	1963	Current	View →
IS 2386 Part 6	Methods of Test for Aggregates for Concrete - Part 6: Measuring Surface Moisture	1963	Current	View →
IS 9845	Determination of Aggregate Impact Value	2006	Current	View →
IS 14798	Aggregates for Bituminous Paving Mixes - Specification	2000	Current	View →
IS 2386 Part 7	Methods of Test for Aggregates for Concrete - Part 7: Alkali-Aggregate Reactivity	2021	Current	View →
IS 2386 Part 8	Methods of Test for Aggregates for Concrete - Part 8: Petrographic Examination	1963	Current	View →
IS 3618	Specification for Quartz Sand for the Glass Industry	2005	Current	View →
IS 3865	Specification for Railway Track Ballast	1986	Current	View →
IS 9142 Part 1	Specification for Lightweight Aggregates for Structural Concrete - Part 1: Manufactured Aggregates	1979	Current	View →
IS 9142 Part 2	Methods of Test for Lightweight Aggregates for Structural Concrete - Part 2: Properties of Aggregates	1979	Current	View →
IS 9142	Code of Practice for Use of Lightweight Aggregates in Structural Concrete	1979	Current	View →
IS 16758	Coarse Recycled Aggregate for Use in Concrete - Specification	2018	Current	View →
IS 16759	Fine Recycled Aggregate for Use in Concrete - Specification	2018	Current	View →
IS 16760	Recycled Aggregate for Use in Bituminous Concrete - Specification	2018	Current	View →
IS 17354 Part 1	Methods of Test for Recycled Aggregates - Part 1: Density, Water Absorption, Percentage of Crushed Particles and Material Finer than 75 Micron Sieve	2020	Current	View →
IS 17354 Part 2	Methods of Test for Recycled Aggregates - Part 2: Abrasion Value, Aggregate Impact Value, Aggregate Crushing Value and Soundness	2020	Current	View →
IS 3118	Specification for Sand for Use in Mortar	1965	Current	View →

Rock Mechanics

36 codes

Code	Title	Year	Status
IS 8764	Method of determination of point load strength index of rocks	1998	Current	View →
IS 10082	Method of test for the determination of tensile strength by indirect tests on rock specimens	1981	Current	View →
IS 11358	Glossary of terms and symbols relating to rock mechanics	1987	Current	View →
IS 13030	Method of test for laboratory determination of water content, porosity, density and related properties of rock material	1991	Current	View →
IS 7317	Code of practice for uniaxial jacking test for deformation modulus of rock	1993	Current	View →
IS 7746	Code of practice for the in-situ shear test on rock	1991	Current	View →
IS 9143	Method for the determination of unconfined compressive strength of rock materials	1979	Current	View →
IS 9179	Method for the preparation of rock specimens for laboratory testing	1979	Current	View →
IS 9221	Method for the determination of modulus of elasticity and Poisson's ratio of rock materials in uniaxial compression	1979	Current	View →
IS 10050	Method for determination of slake durability index of rocks	1981	Current	View →
IS 10782	Method for laboratory determination of dynamic modulus of rock core specimens	1983	Current	View →
IS 11309	Method of conducting a pull-out test on anchor bars and rock bolts	1985	Current	View →
IS 12070	Code of Practice for Design and Construction of Shallow Foundations on Rocks	1987	Current	View →
IS 12608	rock joints-direct shear strength-laboratory method of determination	1989	Current	View →
IS 12634	Method of determination for direct shear strength of rock joints	1989	Current	View →
IS 12955	Code of practice for in-situ determination of rock mass deformability using a flexible dilatometer, Part 1: volume change	2000	Current	View →
IS 12955	Code of practice for in-situ determination of rock mass deformability using flexible dilatometer, Part 2: Radial displacement	2000	Current	View →
IS 13047	Method for determination of the strength of rock materials in triaxial compression	1991	Current	View →
IS 13063	Code of practice for the structural safety of buildings on shallow foundations on rocks	1991	Current	View →
IS 13365	The quantitative classification system of rock mass - Guidelines, Part 1: RMR for predicting engineering properties	2000	Current	View →
IS 13365	Quantitative classification systems of rock mass-Guidelines, Part 2: Rock mass quality for prediction of support pressure in underground openings	2000	Current	View →
IS 13365	The quantitative classification system of rock mass-Guidelines, Part 3: Determination of slope mass rating	2000	Current	View →
IS 13372	Code of practice for seismic testing of rock mass, Part 1: Within a borehole	2000	Current	View →
IS 13372	Code of practice for seismic testing of rock mass, Part 2: Between the borehole	2000	Current	View →
IS 13946	Determination of rock stress- Code of practice, Part 1: Using hydraulic fracturing technique	2000	Current	View →
IS 13946	Determination of rock stress-Code of practice, Part 2: Using USBM-type drill hole deformation gauge	2000	Current	View →
IS 13946	Determination of rock stress- Code of practice, Part 3: Using a CSIR or CSIRO type cell with 9 or 12 strain gauges	2000	Current	View →
IS 13946	Determination of rock stress-Code of practice, Part 4: Using flat jack technique	2000	Current	View →
IS 14243	Guidelines for selection and development of the site for building in hill areas, Part 1: Microzonation of urban centres	2000	Current	View →
IS 14243	Guidelines for selection and development of the site for building in hill areas, Part 2: Selection and development	2000	Current	View →
IS 14395	Guidelines for monitoring of rock movements using probe inclinometer	1996	Current	View →
IS 14396	Argillaceous Swelling Rocks - Methods for Laboratory Testing	2000	Current	View →
IS 14436	Method of test for laboratory determination of resistivity on rock specimen	1997	Current	View →
IS 14448	Code of practice for reinforcement of rock slopes with plane wedge failure	1997	Current	View →
IS 14881	Method for Blast Vibration Monitoring - Guidelines	2001	Current	View →
IS 15026	Guidelines for Use in Prediction of Subsidence and Associated Parameters in Coal Mines Having Nearly Horizontal Single Seam Workings	2002	Current	View →

Furniture

57 codes

Code	Title	Year	Status
IS 5533	Methods of test for strength and stability of chairs and stools, Part 2: Determination of stability of chairs and stools	1969	Current	View →
IS 5823	Recommendations for dimensions for spaces for human activities	1986	Current	View →
IS 1829	library furniture and fittings, Part 1: Timber	2000	Current	View →
IS 1829	Library furniture and fittings, Part 2: Steel	2000	Current	View →
IS 1883	metal shelving racks (adjustable type) - Specification	1983	Current	View →
IS 3312	steel shelving cabinets (adjustable type) -Specification	1984	Current	View →
IS 3313	Steel Filing Cabinets for General Office Purposes - Specification	1983	Current	View →
IS 3314	steel clothes lockers - Specification	1984	Current	View →
IS 3497	Steel wardrobes (adjustable type)-Specification	1992	Current	View →
IS 3498	Metal table (office type)-Specification	1993	Current	View →
IS 3499	metal chairs for office purposes Specification, Part 1: Non-revolving and non-tilting	2000	Current	View →
IS 3499	metal chairs for office purposes Specification, Part 2: Revolving and tilting (BI-LINGUAL)	2000	Current	View →
IS 3663	Dimensions of tables and chairs for office purposes	1991	Current	View →
IS 3763	metal folding chairs - Specification	1983	Current	View →
IS 3845	Code of practice for joints used in wooden furniture	1966	Current	View →
IS 4103	metal nesting chairs- Specification	1977	Current	View →
IS 4414	Wooden table tops -Specification	1990	Current	View →
IS 4415	Glossary of terms relating to wooden furniture and fixtures	1974	Current	View →
IS 4837	School furniture, classroom chairs and tables - Recommendations	1990	Current	View →
IS 5391	Anthropometric dimensions for school children age group 5-17 years	1992	Current	View →
IS 5416	Adjustable metal chairs for the use of typists and operators in telephone exchanges-Specification	2000	Current	View →
IS 5416	Methods of test for strength and stability of chairs and stools, Part 1: Strength	2000	Current	View →
IS 5923	dining tables	1986	Current	View →
IS 5967	wooden clothes' lockers - Specification	2000	Current	View →
IS 5967	Methods of test for strength and stability of tables and trolleys, Part 1: Strength	2000	Current	View →
IS 5974	Methods of test for strength and stability of tables and trolleys, Part 2: Stability	1986	Current	View →
IS 6184	Specification and safety requirements for rigid-sided playpens	1971	Current	View →
IS 6185	Dimensions for furniture mirrors	1971	Current	View →
IS 6188	Specification and safety requirements for high chairs	1988	Current	View →
IS 6189	metal stationary cupboards	1985	Current	View →
IS 6632	wooden folding chairs	1988	Current	View →
IS 7070	Wooden shelving racks, adjustable and non-adjustable type	1988	Current	View →
IS 7259	wooden beds, Part 1: For use with mattresses	2000	Current	View →
IS 7760	steel glass-front cabinets	1985	Current	View →
IS 7761	steel bookcases	1983	Current	View →
IS 8126	composite office tables	1993	Current	View →
IS 8761	steel folding cots	1978	Current	View →
IS 9236	Metal letter-rests	1993	Current	View →
IS 9715	steel visible indexing system cabinets	1981	Current	View →
IS 11525	wooden chairs for office purposes	1986	Current	View →
IS 11679	wooden tables for office use	1986	Current	View →
IS 12674	Methods of test for strength and stability of settees and benches, Part 1: Strength	2000	Current	View →
IS 12674	Methods of test for strength and stability of settees and benches, Part 2: Stability	2000	Current	View →
IS 12680	Wooden sofa-cum-bed	1989	Current	View →
IS 13089	Furniture - Storage units - Determination of stability	1991	Current	View →
IS 13713	Plastic chairs for general office purposes	1993	Current	View →
IS 13896	Machine operators table and visual display unit (VDU) table	1994	Current	View →
IS 2695	drawing filing equipment - Specification	1993	Current	View →
IS 3761	Metal Side Racks (Adjustable Type) - Specification	1983	Current	View →
IS 3762	metal waste paper bins - Specification	1979	Current	View →
IS 3791	metal paper trays - Specification	1983	Current	View →
IS 4116	wooden shelving cabinets (adjustable type) -Specification	1988	Current	View →
IS 4126	wooden wardrobes (Adjustable and non-adjustable type) - Specification	1986	Current	View →
IS 4204	Functional requirements for drafting chairs	1974	Current	View →
IS 4205	Drafting stools-Specification	1989	Current	View →
IS 7076	metal book ends	1983	Current	View →
IS 8467	steel card-index cabinets	1977	Current	View →

Building Limes and Gypsum Products

32 codes

Code	Title	Year	Status
IS 2095	Gypsum Plaster Boards, Part 1: Plain Gypsum Plaster Boards	2000	Current	View →
IS 2095	Gypsum Plaster Boards, Part 2: Coated/Laminated Gypsum Plaster Boards	2000	Current	View →
IS 2095	gypsum plaster boards, Part 3: Reinforced Gypsum plasterboards	2000	Current	View →
IS 2547	gypsum building plaster, Part 1: Excluding premixed lightweight plaster	2000	Current	View →
IS 1635	Code of practice for field slaking of building lime and preparation of putty	1992	Current	View →
IS 1849	Design and installation of vertical mixed feed type lime kiln guide, Part 1: For limestone, Section 2: RCC type shaft	2000	Current	View →
IS 1861	Guide for the manufacture of lime in vertical mixed-feed type kiln, Part 1: From lime-stone	2000	Current	View →
IS 2469	Glossary of terms relating to gypsum	1976	Current	View →
IS 2541	Code of practice for preparation and use of lime concrete	1991	Current	View →
IS 2542	Methods of Test for Gypsum Plaster, Concrete and Products	1999	Current	View →
IS 2547	gypsum building plaster, Part 2: Premixed lightweight plaster	2000	Current	View →
IS 2686	Cinder as Fine Aggregates for use in Lime Concrete	1977	Current	View →
IS 2849	non-load bearing gypsum partition blocks (solid and hollow types)	1983	Current	View →
IS 3115	lime based blocks	1992	Current	View →
IS 4098	lime-pozzolana mixture	1983	Current	View →
IS 4139	calcium silicate bricks	1989	Current	View →
IS 5817	Code of practice for preparation and use of lime-pozzolana mixture concrete in buildings and roads	1992	Current	View →
IS 6508	Glossary of terms relating to building lime	1988	Current	View →
IS 8272	gypsum plaster for use in the manufacture of fibrous plaster boards	1984	Current	View →
IS 9498	inorganic aggregates for use in gypsum plaster	1980	Current	View →
IS 10049	Code of practice for the manufacture of lime-based blocks	1981	Current	View →
IS 10359	Code of practice for manufacture and use of lime-pozzolana concrete blocks for paving	1982	Current	View →
IS 10360	lime-pozzolana concrete blocks for paving	1982	Current	View →
IS 10772	quick setting lime pozzolana mixture	1983	Current	View →
IS 12654	Low-grade gypsum use in the building industry-code of practice	1989	Current	View →
IS 12679	By-product gypsum for use in plaster, blocks and boards	1989	Current	View →
IS 13001	Guidelines for the manufacture of gypsum plaster in Mechanized pan system	1991	Current	View →
IS 14401	Guidelines for handling and storage of building limes	1996	Current	View →
IS 14860	Guidelines on Fuel Saving in Vertical Mixed-feed Lime Shaft Kilns	2000	Current	View →
IS 15648	Pulverized fuel ash for lime-pozzolana mixture applications.	2006	Current	View →
IS 1624	Method of field testing of building lime	1986	Current	View →
IS 3068	broken brick (burnt clay) coarse aggregates for use in lime concrete	1986	Current	View →

Fencing, Gates and Barriers

10 codes

Code	Title	Year	Status
IS 278	Galvanized Steel Barbed Wire for Fencing - Specification	1985	Current	View →
IS 280	Mild Steel Wire for General Engineering Purposes - Specification	2006	Current	View →
IS 2629	Recommended Practice for Hot-Dip Galvanizing of Iron and Steel	1985	Current	View →
IS 2721	Galvanized Steel Chain Link Fence Fabric - Specification	1986	Current	View →
IS 4923	Code of Practice for Woven Wire Fences	1968	Current	View →
IS 12699	Metal Beam Crash Barriers for Highways - W-Beam - Specification	1989	Current	View →
IS 3988	PVC Coated Chain Link Fence Fabric - Specification	1986	Current	View →
IS 4093	Chain Link Fence for Security Purposes - Specification	1967	Current	View →
IS 11817	Zinc Coatings for Steel Structures - Hot Dip Galvanizing - Code of Practice	1986	Current	View →
IS 12700	Metal Beam Crash Barriers for Highways - Thrie-Beam - Specification	1989	Current	View →

Sieves, Sieving and Other Sizing Methods

18 codes

Code	Title	Year	Status
IS 460	Test Sieves: Part-I Wire Cloth Test Sieves	2000	Current	View →
IS 460	Test Sieves: Part-II Perforated Plate Test Sieves	2000	Current	View →
IS 1607	Methods for test sieving	1977	Current	View →
IS 1607	Methods for test sieving	2013	Current	View →
IS 5421	Glossary of terms relating to testing sieves and test sieving	2013	Current	View →
IS 460	Test Sieves: Part-III Methods of Examination of Apertures of Test Sieves	2000	Current	View →
IS 1568	wire cloth for general purposes	1970	Current	View →
IS 2405	industrial sieves, Part 1: Wire cloth sieves	2000	Current	View →
IS 2405	Industrial Sieves, Part II: Perforated Plates	2000	Current	View →
IS 3150	Hexagonal Wire Netting for General Purposes	1982	Current	View →
IS 4124	Glossary of terms relating to powders	1981	Current	View →
IS 4879	Method of sub-division of a gross sample of powder used for determination of particle size	1968	Current	View →
IS 4961	Determination of particle size of powders by air elutriation methods	1968	Current	View →
IS 5257	eyepiece and screen graticules for determination of particle size of powders	1969	Current	View →
IS 5258	Determination of particle size of powders by optical microscope method	1969	Current	View →
IS 5282	Liquid sedimentation methods for determination of particle size of powders	1969	Current	View →
IS 5421	Glossary of terms relating to testing sieves and test sieving	1981	Current	View →
IS 10483	Code for designating perforations of industrial plate sieves (identical with ISO/DIS 7806)	1983	Current	View →

Concrete Reinforcement (Steel)

10 codes

Related:BBS Calculator Rebar Weight

Code	Title	Year	Status
IS 1566	hard-drawn steel wire fabric for concrete reinforcement	1982	Current	View →
IS 6006	uncoated stress-relieved strand for prestressed concrete	1983	Current	View →
IS 10790	Methods of sampling of steel for prestressed and reinforced concrete, Part 1: Prestressing steel	2000	Current	View →
IS 10790	Methods of sampling of steel for prestressed and reinforced concrete, Part 2: Reinforcing steel	2000	Current	View →
IS 14268	Uncoated stress relieved low relaxation seven-ply strand for prestressed concrete -	1995	Current	View →
IS 1785	plain hard-drawn steel wire for prestressed concrete, Part 1: Cold-drawn stress-relieved wire	2000	Current	View →
IS 1785	plain hard-drawn steel wire for prestressed concrete, Part 2: As the drawn wire	2000	Current	View →
IS 6003	INDENTED WIRE FOR PRESTRESSED CONCRETE	2010	Current	View →
IS 9417	Recommendations for welding cold worked bars for reinforced concrete construction	1989	Current	View →
IS 13162	Woven Wire Reinforcement for Concrete	2004	Current	View →

Tunneling and Underground Structures

15 codes

Code	Title	Year	Status
IS 2132 Part 1	Code of practice for thin-walled tube sampling of soils - Stationary piston sampler	1986	Current	View →
IS 2502 Part 1	Code of practice for bending and fixing of bars for concrete reinforcement - Fabrication	1963	Current	View →
IS 13311 Part 1	Non-destructive testing of concrete - Ultrasonic pulse velocity test	1992	Current	View →
IS 14698	Code of practice for safe working in excavation with and without support	1999	Current	View →
IS 4990	Code of practice for in-situ pressure grouting in rock foundations	1974	Current	View →
IS 9013	Method of test for water permeability of concrete	1978	Current	View →
IS 11207	Recommendations for instrumentation for rock mechanics	1985	Current	View →
IS 11208	Guide for subsurface investigation for power tunnels and pressure shafts	1985	Current	View →
IS 13783 Part 1	Guidelines for design and construction of large diameter tunnels (Part 1: Conventional tunneling method)	1993	Current	View →
IS 13783 Part 2	Guidelines for design and construction of large diameter tunnels (Part 2: Tunnel boring machine (TBM) method)	1993	Current	View →
IS 14210	Code of practice for rock bolting for underground excavations	1995	Current	View →
IS 14211	Code of practice for shotcreting	1995	Superseded	View →
IS 14897	Recommendations for use of fibre reinforced concrete	2000	Current	View →
IS 15124	Guidelines for construction of underground structures using New Austrian Tunneling Method (NATM)	2002	Current	View →
IS 5878	Glossary of terms relating to tunneling	1970	Current	View →

Doors, Windows and Shutter

13 codes

Code	Title	Year	Status
IS 1081	Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators	1960	Current	View →
IS 2191	Wooden Flush Door Shutters (Cellular and Hollow Core Type), Part 1: Plywood Face Panels	2000	Current	View →
IS 6248	Metal Rolling Shutters and Rolling Grills	1979	Current	View →
IS 15380	Moulded Raised High-Density Fibre (HDF) Panel Doors	2003	Current	View →
IS 1361	Specification for steel windows for industrial buildings	1978	Current	View →
IS 2191	wooden flush door shutters (cellular and hollow core type): Part 2 Particle board and hardboard face panels	2000	Current	View →
IS 4043	Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors, Windows and Shutters	1969	Current	View →
IS 4913	Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows	1968	Current	View →
IS 6198	ledged braced and battened timber door shutters	1992	Current	View →
IS 10428	Glossary of terms relating to doors	1983	Current	View →
IS 10451	steel sliding shutters (top hung type)	1983	Current	View →
IS 10521	collapsible gates	1983	Current	View →
IS 14856	Glass Fibre Reinforced Plastic (GRP) Panel Type Door Shutters for Internal Use	2000	Current	View →

Clay and Stabilized Soil Products

22 codes

Code	Title	Year	Status
IS 5454	Methods of sampling of clay building bricks	1978	Current	View →
IS 5779	burnt clay soling bricks - Specification	1986	Current	View →
IS 13757	Burnt clay fly ash building bricks-Specification	1993	Current	View →
IS 1478	Clay flooring tiles-	1992	Current	View →
IS 1725	soil-based blocks used in general building construction	1982	Current	View →
IS 2117	Guide for the manufacture of hand-made standard burnt-clay building bricks	1991	Current	View →
IS 2222	Specification for burnt clay perforated building bricks	1991	Current	View →
IS 2248	Glossary of terms relating to clay products for buildings	1992	Current	View →
IS 2691	burnt clay facing bricks-Specification	1988	Current	View →
IS 3367	Burnt clay tiles for use in lining irrigation and drainage works-Specification	1993	Current	View →
IS 3583	burnt clay paving bricks (BI-LINGUAL)	2000	Current	View →
IS 3951	Hollow clay tiles for floors and roofs, Part 1: Filler type -	2000	Current	View →
IS 3951	Hollow clay tiles for floors and roofs, Part 2: Structural type	2000	Current	View →
IS 3952	burnt clay hollow bricks for walls and partitions - Specification	1988	Current	View →
IS 3978	Manufacture of burnt clay Mangalore pattern roofing tiles- Code of practice	1967	Current	View →
IS 4805	Guide for construction of the brick kiln	1978	Current	View →
IS 4885	sewer bricks - Specification	1988	Current	View →
IS 6165	Dimensions for unique shapes of clay bricks	1992	Current	View →
IS 7556	burnt clay jellies	1988	Current	View →
IS 8920	Methods for sampling burnt clay tiles	1978	Current	View →
IS 11650	Guide for the manufacture of standard burnt clay building bricks by semi-mechanized process	1991	Current	View →
IS 13317	Clay roofing country tiles, half round and flat tiles -Specification	1992	Current	View →

Stones

26 codes

Code	Title	Year	Status
IS 6241	Method of Test for Determination of Stripping Value of Road Aggregates	1971	Current	View →
IS 6579	Coarse Aggregate for Water Bound Macadam	1981	Current	View →
IS 1122	Method of test for determination of true specific gravity of natural building stones	1974	Current	View →
IS 1123	Method of identification of natural building stones	1975	Current	View →
IS 1124	Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones	1974	Current	View →
IS 1125	Method of test for determination of weathering of natural building stones	1974	Current	View →
IS 1126	Method of test for determination of durability of natural building stones	1974	Current	View →
IS 1127	Recommendations for dimensions and workmanship of natural building stones for masonry work	1970	Current	View →
IS 1128	Limestone (Slab and Tiles)	1974	Current	View →
IS 1129	Recommendation of dressing natural building stones	1972	Current	View →
IS 1706	Method for determination of resistance to wear by abrasion of natural building stones	1972	Current	View →
IS 3316	structural granite	1974	Current	View →
IS 3620	laterite stone block for masonry	1979	Current	View →
IS 3622	sandstone (slabs and tiles)	1977	Current	View →
IS 4121	Method of test for determination of water transmission rate by capillary action through natural building stones	1967	Current	View →
IS 4122	Method of test for surface softening of natural building stones by exposure to acidic atmospheres	1967	Current	View →
IS 4348	Methods of test for determination of permeability of natural building stones	1973	Current	View →
IS 5218	Method of Test for Toughness of Natural Building Stones	1969	Current	View →
IS 5640	Method of test for determining aggregate impact value of soft coarse aggregates	1970	Current	View →
IS 6250	Roofing Slate Tiles	1981	Current	View →
IS 8348	Code of practice for stacking and packing stone slabs for transportation	1977	Current	View →
IS 8381	Recommended practice for quarrying stones for construction purposes	1977	Current	View →
IS 8759	Code of practice for maintenance and preservation of stones in building	1977	Current	View →
IS 9394	stone lintels	1979	Current	View →
IS 14223	polished building stones, Part 1: Granite	2000	Current	View →
IS 1805	Glossary of terms relating to stones, quarrying and dressing	1973	Current	View →

Functional Requirements in Buildings

16 codes

Code	Title	Year	Status
IS 6074	Code of Practice for Functional Requirements of hotels, restaurants and other food service establishments Daylighting of Factory Buildings	1971	Current	View →
IS 7662	Recommendations for orientation of buildings, Part 1: Non-industrial buildings	2000	Current	View →
IS 8827	Recommendations for basic requirements of school buildings	1978	Current	View →
IS 2526	Code of practice for the acoustic design of auditoriums and conference halls	1963	Current	View →
IS 3103	Code of Practice for Industrial Ventilation	1975	Current	View →
IS 3483	Code of practice for noise reduction in industrial buildings	1965	Current	View →
IS 4954	Recommendations for noise reduction in town planning	1968	Current	View →
IS 6060	Code of Practice for Daylighting of Factory Buildings	1971	Current	View →
IS 7942	Code of practice for daylighting of educational buildings	1976	Current	View →
IS 9736	Glossary of terms applicable to acoustics in buildings	1981	Current	View →
IS 11050	Rating of sound insulation in buildings and building elements, Part 1: Airborne sound insulation in buildings and of interior building elements	2000	Current	View →
IS 11050	Rating of sound insulation in buildings and of building elements, Part 2: Impact sound insulation	2000	Current	View →
IS 11050	Rating of sound insulation in buildings and building elements, Part 3: Airborne sound insulation of facade elements and facades	2000	Current	View →
IS 11907	Recommendations for calculation of solar radiation on buildings	1986	Current	View →
IS 12332	Code of practice for ventilation in petrochemical plants and refineries	1988	Current	View →
IS 5499	Code of practice for construction of underground air-raid shelters in natural soil	1969	Current	View →

Waterproofing and Damp-Proofing

29 codes

Code	Title	Year	Status
IS 13182	Waterproofing and Damp-Proofing of Wet Areas in Building - Recommendations	1991	Current	View →
IS 1346	Code of Practice for Waterproofing of Roofs with Bitumen Felts	1991	Current	View →
IS 1580	bituminous compound for water-proofing and caulking purposes	1991	Current	View →
IS 1609	Code of practice for laying damp-proofing treatment using bitumen felts	1991	Current	View →
IS 3036	Code of practice for laying lime concrete for a waterproofed roof finish	1992	Current	View →
IS 3037	bitumen mastic for use in water-proofing of roofs	1986	Current	View →
IS 4365	Code of practice for the application of bitumen mastic for waterproofing of roofs	1967	Current	View →
IS 4911	Glossary of terms relating to bituminous waterproofing and damp-proofing of buildings	1986	Current	View →
IS 7193	glass fibre base bitumen felts	1994	Current	View →
IS 7193	glass fibre base bitumen felts	2013	Current	View →
IS 7198	Code of practice for damp-proofing using bitumen mastic	1974	Current	View →
IS 7290	Recommendations for use of polyethene film for water-proofing of roofs	1979	Current	View →
IS 9901	Rubber Lining of Steel Tanks, Vessels and Equipment	2006	Current	View →
IS 9918	Code of practice for in-situ waterproofing and damp-proofing treatments with glass fibre tissue-reinforced bitumen	1981	Current	View →
IS 10151	Methods of Test for Sealants for Joints in Civil Engineering Structures	1982	Current	View →
IS 12027	silicone-based water repellents	1987	Current	View →
IS 12054	Code of practice for the application of silicone-based water repellents	1987	Current	View →
IS 13435	Acrylic-based polymer waterproofing material - Method of tests, Part 1: Determination of solid content	2000	Current	View →
IS 13435	Acrylic-based Polymer waterproofing Materials - Methods of Test, Part 2: Determination of Coarse Particles	2000	Current	View →
IS 13435	Acrylic-based polymer waterproofing material - Methods of the test, Part 3: Determination of capillary water take-up	2000	Current	View →
IS 13435	Acrylic-based polymer waterproofing material - Methods of the test, Part 4: Determination of Minimum Film Forming Temperature and White Point	2000	Current	View →
IS 13826	Bitumen-based felts - Method of the test, Part 1: Breaking strength test	2000	Current	View →
IS 13826	Bitumen based felts - Methods of test, Part 2: Pliability test	2000	Current	View →
IS 13826	Bitumen-based felts - Methods of the test, Part 3: Storage sticking test	2000	Current	View →
IS 13826	Bitumen-based felts - Method of the test, Part 4: Pressure head test	2000	Current	View →
IS 13826	Bitumen-based felts - Methods of the test, Part 5: Heat resistance test	2000	Current	View →
IS 13826	Bitumen-based felts - Methods of the test, Part 6: Water absorption test	2000	Current	View →
IS 13826	Bitumen-based felts - Methods of the test, Part 7: Determination of binder content	2000	Current	View →
IS 14695	Glass Fibre Base Coal Tar Pitch Outerwrap	1999	Current	View →

Tanks, Silos and Storage Structures

13 codes

Code	Title	Year	Status
IS 3370 Part 2	Concrete Structures for Storage of Liquids - Reinforced Concrete Structures	1965	Current	View →
IS 12051	Code of Practice for Design and Construction of Retaining Walls (General)	1986	Current	View →
IS 804	Code of Practice for Design of Steel Structures for Overhead Water Tanks	1989	Current	View →
IS 805	Code of Practice for Use of Hot Riveted or Bolted Connections in Steel Structures for Overhead Water Tanks	1968	Current	View →
IS 1520	Horizontal Steel Tanks for Storage of Petroleum Products	1994	Current	View →
IS 1521	Vertical Steel Tanks for Petroleum Products	2019	Current	View →
IS 3370 Part 1	Concrete Structures for Storage of Liquids - General Requirements	1965	Current	View →
IS 3370 Part 3	Concrete Structures for Storage of Liquids - Prestressed Concrete Structures	1967	Current	View →
IS 4995 Part 1	Criteria for Design of Structures for Storage of Grains - General Requirements	1974	Current	View →
IS 4995 Part 2	Criteria for Design of Structures for Storage of Grains - Loads and Pressures	1974	Current	View →
IS 4995 Part 3	Criteria for Design of Structures for Storage of Grains - Design Considerations	1974	Current	View →
IS 11244	Code of Practice for Design and Construction of Elevated Reinforced Concrete Water Tanks	1985	Current	View →
IS 11682	Code of Practice for Design and Construction of Prestressed Concrete Cylindrical Tanks for Storage of Liquids	1985	Current	View →

Ports and Harbours

6 codes

Code	Title	Year	Status
IS 7314	Glossary of terms relating to port and harbour engineering	1974	Current	View →
IS 9527	Code of practice for design and construction of port and harbour structures, Part 1: Concrete monoliths	1974	Current	View →
IS 9527	Code of practice for design and construction of port and harbour structures, Part 3: Sheet pile walls	2000	Current	View →
IS 9527	Code of practice for design and construction of port and harbour structures, Part 4: Cellular sheet pile structures	2000	Current	View →
IS 9527	Code of practice for design and construction of port and harbour structures, Part 6: Block work	2000	Current	View →
IS 10020	Recommendations for design and construction of port and harbour components, Part 4: Slipways	2000	Current	View →

Earthquake Engineering

4 codes

Related:Handbook (Seismic Zones)

Code	Title	Year	Status
IS 4967	Recommendations for seismic instrumentation for river valley projects	1968	Current	View →
IS 4991	Criteria for blast-resistant design of structures for explosions above ground	1968	Current	View →
IS 6922	Criteria for safety and design of structures subject to underground blasts	1973	Current	View →
IS 13935	Seismic Evaluation, Repair and Strengthening of Masonry Buildings - Guidelines	2009	Current	View →

Hill Area Development Engineering

4 codes

Code	Title	Year	Status
IS 14496	Guidelines for the preparation of landslide - Hazard zonation maps in mountainous terrains, Part 2: Macro-zonation	2000	Current	View →
IS 14680	Landslide Control - Guidelines	1999	Current	View →
IS 14804	Siting, Design and Selection of Materials for Residential Buildings in Hilly Areas - Guidelines	2000	Current	View →
IS 14961	Guidelines for Rain Water Harvesting in Hilly Areas by Roof Water Collection System	2001	Current	View →

Cyclone Resistant Structure

1 codes

Code	Title	Year	Status
IS 15499	Guidelines for Survey of Housing and Building Typology in Cyclone Prone Areas for Assessment of Vulnerability of Regions and Post Cyclone Damage Estimation	2004	Current	View →

What are IS codes and why civil engineers use them

Indian Standard (IS) codes are the national technical standards published by the Bureau of Indian Standards (BIS). They define the minimum acceptable requirements for materials, design, testing, and construction across the Indian construction industry. When an engineer specifies M25 concrete with 25 mm cover, those parameters come from IS 456:2000. When a site engineer checks a TMT bar before a pour, the bend test is per IS 1786. When a contractor orders curing compound, the specification is IS 9103.

BIS has published over 20,000 IS codes across all industries; around 2,400 are directly relevant to civil engineering and construction. The challenge for every practicing engineer is discoverability — finding the right code, the right clause, and the right amendment at the moment you need it, on a construction site or in a design office. InfraLens indexes 2,363 IS codes and 100 IRC codes with key values, clauses, tables, international equivalents (ACI, ASTM, EN, BS, JIS, AS/NZS), and direct links to free PDFs where legally available — searchable by code number, keyword, material, or engineer role.

How to find the right code

If you know the code number (IS 456, IS 875 Part 3), type it into the search bar above — results are instant. You can also type partial numbers (`1893`) to find all parts of a code series.

If you know the topic but not the code number (*concrete cover, wind zone, development length, anchorage length, design shear strength*), use the keyword search or browse by category above. Each code is tagged with material (concrete, steel, soil), asset type (building, bridge, road, water tank), and engineer role (structural, geotechnical, site, QA/QC).

For international project comparisons, the code detail pages show equivalents in ACI (American), ASTM, EN/Eurocode, BS (British), JIS (Japanese), and AS/NZS (Australian/New Zealand) standards. IS 456 maps to ACI 318 and EN 1992-1-1; IS 800 maps to AISC 360 and EN 1993-1-1; IS 875 Part 3 maps to ASCE 7 and EN 1991-1-4.

Every code page has a Key Values tab with extracted numerical parameters (cover, grade, W/C ratio, lap length, stirrup spacing), a Tables & Clauses tab with reference tables, a FAQ tab, and a QA/QC tab with relevant inspection templates.

Frequently Asked Questions

15 common questions about this topic, answered by civil engineers.

How many IS codes are there for civil engineering?+

BIS has published over 20,000 Indian Standards across all industries, of which approximately 2,300–2,500 are directly relevant to civil engineering and construction. InfraLens indexes 2,363 IS codes and 100 IRC codes covering structural design, materials, testing, workmanship, bridges, roads, water supply, fire safety, and earthquake-resistant design. The set grows by 30-60 codes per year as BIS Sectional Committees publish revisions and new standards.

Which is the most important IS code for a civil engineer?+

IS 456:2000 — Plain and Reinforced Concrete: Code of Practice is the single most referenced IS code in Indian civil engineering. It governs concrete mix design, durability, nominal cover, limit state design of RCC members, detailing, and construction practice. IS 456 is cross-referenced by IS 1893 (seismic), IS 13920 (ductile detailing), IS 10262 (mix design), IS 875 (loads), and IS 800 (composite construction). Next most referenced: IS 800:2007, IS 875 Parts 1-5, and IS 1893 Part 1.

Can I download IS codes for free legally?+

Yes, for many older IS codes. Under a 2018 BIS initiative and Supreme Court guidance, a large number of IS codes are free to download from the BIS Standards Portal (services.bis.gov.in) and archives like law.resource.org. However: codes published or revised after approximately 2018 are generally available only through the paid BIS e-Standards portal. Amendments are sometimes sold separately. For design and compliance decisions, always verify your PDF matches the current version with all amendments. InfraLens shows year + amendment status on each code page and links to the free PDF where available.

What is the difference between IS 456 and IS 10262?+

IS 456:2000 is the overall code of practice for plain and reinforced concrete — design (working stress and limit state), durability, exposure classes, cover, and detailing. It tells you what the concrete should achieve. IS 10262:2019 is specifically the Concrete Mix Proportioning guidelines — it tells you how to arrive at the mix (cement, water, fine and coarse aggregates, admixture) that will deliver the grade specified under IS 456. The mix design procedure in IS 10262 uses inputs from IS 456 (target mean strength, max W/C, min cement content) and gives outputs that satisfy durability and strength requirements.

What is the minimum nominal cover for RCC per IS 456?+

IS 456:2000 Clause 26.4.2 and Table 16 specify nominal cover based on exposure class: Mild — 20 mm, Moderate — 30 mm, Severe — 45 mm, Very Severe — 50 mm, Extreme — 75 mm. Additional member-specific rules: columns 40 mm minimum (25 mm if bars ≤ 12 mm), footings 50 mm minimum, water tanks per IS 3370 (typically 45-50 mm on water face). Fire resistance may require increased cover per IS 456 Clause 26.4.3.

Which IS code is used for earthquake-resistant design in India?+

India's seismic design uses the IS 1893 series: Part 1:2016 (buildings, zone map, response spectrum, base shear), Part 2:2022 (liquid retaining tanks), Part 3:2014 (bridges, retaining walls), Part 4:2015 (industrial structures), Part 5 (dams, under revision). Always used with IS 13920:2016 — Ductile Detailing of RCC — which mandates specific detailing for beams, columns, beam-column joints, and shear walls in seismic zones III, IV, and V. Most state PWDs and public-funded projects mandate IS 1893 + IS 13920 for all new construction.

What IS codes are used for steel structure design?+

IS 800:2007 is the core code — limit state and working stress methods for tension, compression, beams, connections, fatigue, fire, and seismic design of steel frames. Supporting: IS 2062:2011 (hot-rolled structural steel specs — E250 to E550 grades), IS 808:2021 (steel section dimensions), IS 4923 (hollow sections — RHS, SHS, CHS), IS 811 (cold-formed sections), IS 9595 (arc welding), IS 4000 (high-strength friction-grip bolts). Fire resistance and composite construction are covered in IS 800 Sections 16 and 10 respectively.

Which IS code is used for wind load calculation?+

IS 875 (Part 3):2015 — basic wind speed (6 zones across India, 33-55 m/s), design wind speed Vz = Vb × k1 × k2 × k3 × k4 (probability, terrain/height, topography, importance factors), design wind pressure pd = 0.6 Vz² (N/m²), force and pressure coefficients. Cyclone-prone areas (Gujarat, TN, AP, Odisha, WB coasts) use k4 = 1.30 for important buildings. Tall or flexible structures (>50 m) require dynamic analysis using the Gust Factor Method instead of the static method.

What water-cement ratio is allowed per IS 456?+

IS 456:2000 Table 5 specifies maximum W/C ratio based on exposure: Mild 0.55 (M20), Moderate 0.50 (M25), Severe 0.45 (M30), Very Severe 0.45 (M35), Extreme 0.40 (M40). These are maximum values for durability — a lower W/C can always be used for better durability. Mix design per IS 10262:2019 validates the chosen W/C via trial mixes. Field W/C is typically lower than the maximum (a good M25 might run 0.42-0.48). For high-performance concrete, admixtures (superplasticizers per IS 9103) allow W/C as low as 0.30 with adequate workability.

Which IS code covers TMT bars?+

IS 1786:2008 — High Strength Deformed Steel Bars and Wires for Concrete Reinforcement. Covers grades Fe 415, Fe 500, Fe 500D, Fe 550, Fe 550D, Fe 600 — chemical composition, mechanical properties, bend/rebend tests, weight per metre, and identification marks. Fe 500D or ductile grades are mandatory in seismic zones III, IV, V per IS 13920 Clause 5.2 — the higher elongation ensures adequate energy dissipation during earthquakes. ISI mark is mandatory for sale of TMT bars in India.

What is the difference between IS codes and IRC codes?+

IS codes are published by BIS for all industries including civil construction. IRC codes (Indian Roads Congress) are published by IRC, an autonomous body since 1934, specifically for roads, highways, bridges, and pavements. Both are used together on infrastructure projects. A typical road bridge references IRC 6 (loads), IRC 112 (limit state design) or IRC 21 (legacy RCC bridges), IRC 78 (substructure/foundation), IS 1893 Part 3 (seismic), IS 456 (general RCC), and IS 800 (steel superstructure). IRC codes are sold via the IRC bookshop and MoRTH-approved distributors — not freely available.

What is the IS code for limit state vs working stress design?+

IS 456:2000 covers both. Limit state method (LSM) — Section 4 and 5, the modern approach — designs for ultimate limit state (collapse) using factored loads (DL×1.5 etc.) and factored material strengths (fck/1.5, fy/1.15), plus serviceability limit state (deflection, cracking). Working stress method (WSM) — Annex B — the classical elastic approach still permitted but effectively legacy. All modern Indian structural codes (IS 800, IS 1893, IS 10262, IS 13920, IRC 112) are LSM-based. WSM survives only in water-retaining structures (IS 3370) and some older infrastructure. Start new projects in LSM.

What does M20, M25, M30 concrete grade mean?+

The M stands for Mix; the number is the characteristic cube compressive strength at 28 days in N/mm² (MPa) — the strength below which not more than 5% of test cubes should fall. Common grades: M10/M15 lean concrete (not RCC), M20 minimum for RCC in mild exposure, M25 common for residential RCC, M30 medium-rise and commercial, M35-M45 high-rise and severe exposure, M50-M70 pre-stressed and bridges, M80+ specialized. Higher grades require lower W/C ratios and often chemical admixtures — they are not simply 'more cement.'

How often are IS codes updated?+

Each IS is reviewed at least every 5 years per BIS policy and either confirmed, amended (minor changes as separate amendment sheets), or revised (new edition with a new year). Core structural codes (IS 456, IS 800) have 10-15 year major revision cycles with interim amendments — IS 456:2000 has had 4+ amendments. Material specifications (IS 269 cement, IS 383 aggregates, IS 1786 TMT) revise more frequently, roughly every 5-8 years. Always verify your version by checking the BIS portal or the code's detail page on InfraLens — never design to a superseded code without written instructions from the project authority.

What IS codes should a fresh civil engineer start with?+

Read these 10 in order to build the foundation: IS 456:2000 (RCC design — the single most important), IS 875 Parts 1-3 (dead, live, wind loads), IS 1893 Part 1:2016 (earthquake design), IS 10262:2019 (concrete mix design), IS 800:2007 (steel design), IS 13920:2016 (ductile detailing). For site execution: IS 516:2021 (concrete testing), IS 1786:2008 (TMT bars), IS 383:2016 (aggregates), IS 2386 series (aggregate tests). With these mastered, any civil engineering project on site or in a design office becomes navigable.

Related resources on InfraLens

IRC Codes — Highways & Bridges

100 Indian Roads Congress codes for bridge design, pavement, geometric design, and traffic engineering.

CE Handbook

75 reference tables and design aids — section properties, TMT weights, mix design charts, rebar schedules.

Design Rules (NBC 2016)

100 quick-reference rules — ceiling heights, stair dimensions, room sizes, ramp slopes, door widths per NBC.

QA/QC Templates

300 QA/QC checklists, test formats, and inspection registers mapped to IS codes by test method.