IS 15834:2000 is the Indian Standard (BIS) for stainless steel sliding door bolts for use with padlocks -specification bilingual). This standard specifies the material, dimensional, and performance requirements for stainless steel sliding door bolts (often called 'aldrops') intended for use with padlocks. It covers different sizes, manufacturing quality, finish, and mandates tests for endurance and strength to ensure durability and security.
Stainless steel sliding door bolts for use with padlocks -Specification Bilingual)
Overview
- Status
- Current
- Usage level
- Specialized
- Domain
- Architectural — Builder Hardware
- Type
- Specification
Also on InfraLens for IS 15834
Practical Notes
! Ensure the specified stainless steel grade (Grade X04Cr18Ni9 of IS 6603) is used, as this is crucial for corrosion resistance.
! The strength of the entire locking system heavily depends on the quality of fasteners used to fix the bolt and staple to the door and frame.
! For security applications, verify the staple fully shrouds the padlock shackle to prevent easy cutting.
Frequently referenced clauses
stainless steelsteelhardware
International Equivalents
🌐
International Comparison — Coming Soon
We're adding equivalent international standards for this code.
Key Values5
Quick Reference Values
Specified Stainless Steel GradeX04Cr18Ni9 as per IS 6603
Standard Nominal Lengths150 mm, 200 mm, 250 mm, 300 mm
Endurance Test Requirement25,000 cycles of operation without failure
Static Load Strength Test1.0 kN for 5 minutes without deformation
Finish RequirementSmooth, polished, free from burrs and sharp edges
Tables & Referenced Sections
Key Tables
Table 1 - Dimensions of Sliding Door Bolts
Key Clauses
Clause 4 - Material
Clause 5 - Dimensions and Tolerances
Clause 6 - Manufacture and Finish
Clause 8 - Performance Requirements
Clause 10 - Marking
Frequently Asked Questions4
What material is specified for these sliding bolts?+
Stainless steel conforming to Grade X04Cr18Ni9 of IS 6603 (Clause 4).
What are the standard sizes for these bolts?+
The standard nominal lengths are 150, 200, 250, and 300 mm as per Table 1.
What is the endurance test for this bolt?+
The bolt assembly must withstand 25,000 operating cycles without failure (Clause 8.2).
How is the strength of the bolt tested?+
It must withstand a static load of 1.0 kN for 5 minutes without any permanent set or damage (Clause 8.3).
QA/QC Inspection Templates
📋
QA/QC templates coming soon for this code.