What is the minimum ground clearance for a standard flat swing seat?

The minimum clearance is 350 mm from the ground to the underside of the seat when at rest (Table 1).

Is a safety surface mandatory under swings?

Yes, an impact attenuating surface is required within the safety area if the free height of fall exceeds 600 mm, which is almost always the case for swings.

Does this standard cover 'group' or 'nest' swings?

This 2003 version primarily addresses traditional swings (Types 1, 2, 3). More modern equipment like nest swings are covered in later revisions or international standards like EN 1176.

How is the structural integrity of a swing tested?

Through static load tests specified in Clause 5.2, where a defined force (e.g., 2070 N per user station) is applied to the swing components to check for permanent deformation or failure.

IS 10987 Part 2

: 2003

Playground Equipment - Additional Specific Safety Requirements and Test Methods for Swings

CurrentSpecializedSafety CodeBIMArchitectural · Swimming Pools and Sports Facilities

Download PDF BIS Portal Google

This standard specifies additional safety requirements and test methods for swings intended for permanent installation in public children's playgrounds. It covers various types of swings and addresses hazards related to structural failure, entrapment, and falls to ensure user safety.

Specifies additional safety requirements and test methods specific to swings used in playgrounds.

Quick Reference Values

Minimum ground clearance at rest (Type 1 & 2)350 mm

Minimum ground clearance for cradle swings (Type 3)400 mm

Minimum clearance between swing seat and frame20% of suspension length + 200 mm

Minimum distance between adjacent swing seats20% of suspension length + 300 mm

Static load test force per user station2070 N

Practical Notes

This code is Part 2 of a series and must be read in conjunction with IS 10987 (Part 1), which details general safety requirements for all playground equipment.

Pay close attention to calculating the 'falling space' and 'safety area' (Clause 4.6) as this is critical for preventing collisions and providing adequate room for safe use.

The standard does not apply to toy swings intended for domestic family use, which are covered by different standards.