InfraLensInfraLens
IS CodesIRCToolsSORHandbookQA/QCPMCFormatsCPHEEOMapsProjectsDCRRulesAbout Join Channel
Join
IS CodesIRCToolsSORHandbookQA/QCPMCFormatsCPHEEOMapsProjectsDCRDesign RulesBIMAbout Join WhatsApp Channel
InfraLensInfraLens
IS CodesIRCToolsSORHandbookQA/QCPMCFormatsCPHEEOMapsProjectsDCRRulesAbout Join Channel
Join
IS CodesIRCToolsSORHandbookQA/QCPMCFormatsCPHEEOMapsProjectsDCRDesign RulesBIMAbout Join WhatsApp Channel

IS 7760 : 1985steel glass-front cabinets

PDFGoogleCompareBIS Portal
Link points to Internet Archive / others. Not hosted by InfraLens. Details
ANSI/BIFMA X5.9 · BS EN 14073-2 · GSA A-A-304D
CurrentSpecializedSpecificationArchitectural · Furniture
PDFGoogleCompareBIS Portal
Link points to Internet Archive / others. Not hosted by InfraLens. Details
OverviewValues6InternationalTablesFAQ4Related

IS 7760:1985 is the Indian Standard (BIS) for steel glass-front cabinets. This standard specifies the requirements for materials, dimensions, construction, and finish for three standard sizes of steel, glass-front cabinets. It aims to ensure quality and interchangeability for cabinets typically used in offices, laboratories, and institutions for storage purposes.

steel glass-front cabinets

Overview

Status
Current
Usage level
Specialized
Domain
Architectural — Furniture
Type
Specification
International equivalents
ANSI/BIFMA X5.9-2019 · BIFMA (Business + Institutional Furniture Manufacturers Association), USABS EN 14073-2:2004 · BSI (British Standards Institution), UK / CEN, EuropeGSA A-A-304D · GSA (General Services Administration), USABS EN 14073-3:2004 · BSI (British Standards Institution), UK / CEN, Europe
Typically used with
IS 513IS 1079IS 2835
Also on InfraLens for IS 7760
6Key values2Tables4FAQs
Practical Notes
! This standard is for procurement and manufacturing; ensure that the manufacturer's certificate confirms compliance with all clauses, especially material thickness (Table 2) and finish (Clause 6).
! Pay close attention to the locking arrangement (Clause 5.5), which specifies a three-way bolting mechanism for security, a feature often compromised in cheaper alternatives.
! Verify that shelves are adjustable as specified in Clause 5.4, as this is a key functional requirement for versatile storage.
Frequently referenced clauses
Cl. 3MaterialsCl. 4Dimensions and TolerancesCl. 5ConstructionCl. 6FinishCl. 8Marking
Pulled from IS 7760:1985. Browse the full clause & table index below in Tables & Referenced Sections.
steelglass

International Equivalents

Similar International Standards
ANSI/BIFMA X5.9-2019BIFMA (Business + Institutional Furniture Manufacturers Association), USA
MediumCurrent
Storage Units - Tests
Covers safety and durability performance tests for various storage units, including steel cabinets.
BS EN 14073-2:2004BSI (British Standards Institution), UK / CEN, Europe
MediumCurrent
Office furniture - Storage furniture - Part 2: Safety requirements
Specifies safety requirements for office storage furniture, focusing on stability and structural safety.
GSA A-A-304DGSA (General Services Administration), USA
HighCurrent
Commercial Item Description: Cabinets, Storage, Steel
Provides descriptive and performance requirements for US government procurement of steel storage cabinets.
BS EN 14073-3:2004BSI (British Standards Institution), UK / CEN, Europe
LowCurrent
Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure
Provides test methods for strength and stability, often referenced by full product standards.
Key Differences
≠IS 7760 is primarily prescriptive, specifying exact material thicknesses (e.g., 0.8 mm for body), dimensions, and construction methods. International standards like BIFMA X5.9 are performance-based, defining test outcomes (e.g., cycle tests, load tests) without dictating construction.
≠The Indian Standard mandates specific materials, such as CRCA steel sheets conforming to IS 513 and a 6-lever unpickable lock. International equivalents are material-agnostic as long as performance criteria for strength, stability, and security are met.
≠IS 7760 specifies a single set of overall dimensions (1980 x 915 x 485 mm). International standards do not specify product dimensions, focusing instead on safety and ergonomic considerations applicable to a wide range of sizes.
≠Durability in IS 7760 is implied through construction requirements, whereas standards like ANSI/BIFMA X5.9 and BS EN 14073 explicitly test for durability with dynamic tests, such as door cycle tests (e.g., 20,000 cycles) and drop tests.
≠The IS code specifies a particular finishing process (seven-tank phosphating and stoving enamel paint), while international standards specify performance requirements for the finish, such as adhesion and corrosion resistance (e.g., ASTM D3359 for adhesion).
Key Similarities
≈All standards share the fundamental scope of ensuring that steel storage cabinets are fit for their intended purpose in an office or institutional environment.
≈Both IS 7760 and its international counterparts include requirements for the structural integrity of shelves, specifying their ability to bear a significant distributed load without failure or excessive deflection.
≈All standards address user safety. IS 7760 requires the removal of sharp edges and secure glazing, while international standards include explicit, rigorous tests for stability (anti-tipping) and structural safety.
≈The provision for adjustable shelves is a common feature across IS 7760 and the cabinets tested under international standards, acknowledging the need for user flexibility.
Parameter Comparison
ParameterIS ValueInternationalSource
Cabinet Body Sheet Steel Thickness0.80 mm (minimum)Not specified; performance-based. Manufacturer selects gauge to pass strength and durability tests.ANSI/BIFMA X5.9-2019
Shelf Sheet Steel Thickness1.00 mm (minimum)Not specified; must withstand specified load test without failure.ANSI/BIFMA X5.9-2019
Shelf Load Capacity (Distributed)40 kg, with maximum deflection of 6.5 mm.Must withstand a specified proof load (e.g., ~75 kg for a similar size shelf) with minimal permanent deflection.BS EN 14073-3:2004
Stability Against TippingNot specified via a quantitative test method.Must not tip when a horizontal force of 200 N is applied at 1m height, or with specified loads in open doors.BS EN 14073-2:2004
Door DurabilitySpecified by construction (e.g., double-walled, continuous piano hinge). No cycle test.Hinged doors must complete 20,000 opening/closing cycles without loss of serviceability.ANSI/BIFMA X5.9-2019
Glass Specification4 mm thick sheet glass conforming to IS 2835.Specifies Type I (tempered) or Type II (laminated) safety glazing, typically 1/4 inch (6.35 mm) thick.GSA A-A-304D
Locking Mechanism6-lever unpickable lock.Must withstand 100 lbf force test and 10,000 lock/unlock cycles.ANSI/BIFMA X5.9-2019
⚠ Verify details from original standards before use

Key Values6

Quick Reference Values
Minimum sheet thickness for body1.00 mm
Minimum sheet thickness for shelves0.80 mm
Minimum sheet thickness for door stiffener0.63 mm
Glass thickness4 mm
Standard dimensions (Size 1)1800 H x 900 W x 450 D mm
Number of shelves4 adjustable shelves

Tables & Referenced Sections

Key Tables
Table 1 - Nominal Dimensions of Cabinets
Table 2 - Thickness of Steel Sheets
Key Clauses
Clause 3 - Materials
Clause 4 - Dimensions and Tolerances
Clause 5 - Construction
Clause 6 - Finish
Clause 8 - Marking

Related Resources on InfraLens

Cross-Referenced Codes
IS 513:2018Cold Rolled Low Carbon Steel Sheets and Strip...
→
IS 1079:2017Hot Rolled Carbon Steel Sheets and Strips
→
IS 2835:2009Flat Transparent Sheet Glass
→

Frequently Asked Questions4

What is the minimum steel sheet thickness for the main body of the cabinet?+
1.00 mm for the body, top, bottom, and door frame, as per Table 2.
What are the standard dimensions of the largest specified cabinet?+
Size 1 is 1800 mm high, 900 mm wide, and 450 mm deep, according to Table 1.
What type of locking system is required?+
A three-way bolting mechanism operated by a 6-lever lock conforming to IS 6005 (Clause 5.5).
How many shelves should be included?+
The cabinet must be supplied with four adjustable shelves (Clause 5.4).

QA/QC Inspection Templates

📋
QA/QC templates coming soon for this code.
Browse all 300 templates →