IS 9715:1981 is the Indian Standard (BIS) for steel visible indexing system cabinets. This standard specifies the material, dimensional, constructional, and finish requirements for steel visible indexing system cabinets. It is intended to ensure quality and interchangeability for cabinets used in offices and record rooms. Note: This standard has been withdrawn by BIS.
steel visible indexing system cabinets
| Parameter | IS Value | International | Source |
|---|---|---|---|
| Steel Sheet Thickness (Cabinet Body) | Prescribed as 1.0 mm for sides/top/bottom and 0.8 mm for frames, conforming to IS 513. | Not prescribed. Performance is evaluated through tests, allowing for varied thickness. | BS EN 14073-2:2004 |
| Drawer/Tray Load Capacity Test | Static load of 1.4 kg (uniformly distributed) without permanent set. | Static load test (e.g., 25-45 kg) plus a cyclic durability test (e.g., 50,000 cycles with load). | ANSI/BIFMA X5.9-2019 |
| Stability Test (Anti-Tip) | No specific quantitative test method is defined. | Unit must not tip when a specified force (e.g., 100N horizontal pull) is applied to the handle of the top-most extended drawer. | BS EN 14073-2:2004 |
| Drawer Cycle Durability Test | Not specified in the standard. | Must withstand 50,000 open/close cycles with a specified load in the drawer. | ANSI/BIFMA X5.9-2019 |
| Finishing Process | Prescribed: Phosphating pre-treatment and stoving synthetic enamel paint. | Not prescribed. Finish quality is assessed via performance tests for adhesion, corrosion resistance, and abrasion. | ANSI/BIFMA X5.9-2019 |
| Dimensional Requirements | Prescribes specific overall cabinet and tray dimensions for different models (e.g., 10-tray, 15-tray). | No prescribed dimensions. Allows manufacturer flexibility, as long as the final product passes performance tests. | BS EN 14073-2:2004 |