Link points to Internet Archive / others. Not hosted by InfraLens. Details
IS 3762:1979 is the Indian Standard (BIS) for metal waste paper bins - specification. This standard specifies the requirements for materials, dimensions, manufacture, and finish of metal waste paper bins used in offices and institutions to ensure structural rigidity and durability.
! Ensure the top edges are properly rolled, beaded, or wired to prevent injury from sharp metal during handling.
! Verify the quality of the stove enamel or powder coating finish, including the application of primer, to prevent premature rusting, especially at the bottom seams.
A-A-182CGeneral Services Administration (GSA), USA
HighCurrent
RECEPTACLE, WASTE
Covers prescriptive requirements for various types of metal waste receptacles for federal procurement.
UL 1315Underwriters Laboratories (UL), USA
MediumCurrent
Standard for Safety for Metal Waste Cans
Focuses on performance-based safety requirements, primarily fire containment, rather than dimensions.
BS 4945:1973British Standards Institution (BSI), UK
MediumWithdrawn
Specification for fire-resistant, self-extinguishing waste-paper bins
Specifies performance requirements for fire resistance, a narrower scope than the general IS 3762.
EN 13501-1European Committee for Standardization (CEN), Europe
LowCurrent
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Provides a fire performance classification system often referenced for products like bins in public areas.
Key Differences
≠IS 3762 is highly prescriptive, defining specific dimensions and material thicknesses. In contrast, modern international counterparts like UL 1315 are performance-based, focusing on safety outcomes like fire containment regardless of exact construction.
≠International standards like GSA A-A-182C and UL 1315 place a strong emphasis on fire safety, often requiring specific tests for fire containment and self-extinguishing properties, which are not specified in IS 3762.
≠The Indian standard references specific Indian material codes (e.g., IS 513 for steel). International standards reference their respective regional material codes, such as ASTM in the US (e.g., ASTM A1008).
≠GSA A-A-182C covers a much broader range of receptacle types, including those with swing-tops, dome tops, and for sanitary waste, whereas IS 3762 is limited to basic open-top cylindrical and rectangular bins.
Key Similarities
≈Both IS 3762 and equivalent standards like GSA A-A-182C identify sheet steel as a primary material of construction for durability.
≈The requirement for a reinforced top rim (beaded or wired) to provide rigidity and user safety is a common construction detail across the Indian and international specifications.
≈All standards mandate a protective and decorative finish, such as paint or powder coating, applied over a properly cleaned and prepared metal surface to prevent corrosion.
≈The fundamental purpose defined by the standards is the same: to specify a durable container for the collection of non-hazardous dry waste in commercial, institutional, or domestic settings.
Parameter Comparison
Parameter
IS Value
International
Source
Steel Sheet Specification
Mild steel sheet conforming to IS 513:1973
Cold-rolled steel sheet, commercial quality, conforming to ASTM A1008/A1008M
GSA A-A-182C
Nominal Sheet Thickness (Small Bin)
0.50 mm (for 250 mm dia x 300 mm H bin)
Not prescriptively specified; must meet performance tests. Typically 0.5 mm to 0.7 mm (26 to 22 gauge).
GSA A-A-182C
Top Edge Construction
Shall be securely wired or beaded.
Top edge shall be curled or beaded over a continuous steel wire ring.
GSA A-A-182C
Finish System
Stove-enamelled or two coats of synthetic enamel over a primer.
Powder coat or liquid coating; must pass adhesion (ASTM D3359) and humidity resistance tests.
GSA A-A-182C
Fire Performance Requirement
Not specified in the standard.
Must be capable of containing burning paper without melting, deforming, or igniting surrounding materials.
UL 1315
Standard Cylindrical Size (Example)
250 mm diameter x 300 mm height (approx. 15 Litres)
11-3/8 inch diameter x 14 inch height (approx. 25 Litres)
GSA A-A-182C (Type I, Style A)
⚠ Verify details from original standards before use