What are the primary applications for IS 1626 Part 1 pipes?

They were historically used for rainwater, soil, waste, and ventilating applications in building drainage systems.

What code dictates the testing methods for these asbestos cement pipes?

Testing methods for asbestos cement products are detailed in IS 5913.

Can these pipes be used for pressurized water supply?

No, these specific pipes are designed for gravity-fed building drainage and ventilation, not for high-pressure water mains.

IS 1626

: 2000

Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings, Part 2: Gutter and gutter fittings )

CurrentRareSpecificationMaterials Science · Cement Matrix Products

Download PDF BIS Portal Google

This standard lays down the specifications for asbestos cement gutters and gutter fittings intended for rainwater drainage in buildings. It details the dimensions, manufacturing tolerances, physical properties, and testing requirements for various gutter types including half-round, valley, and boundary wall gutters.

Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings, Part 2: Gutter and gutter fittings )

Quick Reference Values

Common nominal diameters50 mm, 75 mm, 100 mm, 150 mm

Standard pipe lengths1.5 m, 2.0 m, 3.0 m

Minimum hydraulic test pressure0.05 MPa (for building gravity pipes)

Practical Notes

Due to the severe health hazards and carcinogenic nature of asbestos fibers, these products are banned or heavily restricted in many jurisdictions. Verify local laws before specifying or handling.

Modern construction overwhelmingly uses UPVC, CPVC, or Cast Iron pipes instead of asbestos cement.

If maintenance, removal, or repair of existing AC pipes is required, strict asbestos abatement protocols and safety gear (as per IS 12059) must be used to prevent fiber inhalation.