Home · Rate Analysis · RCC Reinforcement Steel (Fe500D, cut–bend–place)

Rate Analysis of RCC Reinforcement Steel (Fe500D, cut–bend–place)

Full analysis of rates — material, labour and machinery per tonne — at current market prices. Figures shown for Delhi; compare 12 cities below or use the interactive tool for any of 50 cities.

Total rate (Delhi)₹82,856 – ₹92,156 per tonne

Detailed Analysis — per tonne

Component	Quantity	Rate	Amount
Materials
1050 kg TMT (incl. 5% wastage)	1050 kg	₹60 – ₹66	₹63,000 – ₹69,300
9 kg binding wire	9 kg	₹58 – ₹65	₹522 – ₹585
Labour
Bar Bender / Steel Fixer	9 day	₹637 – ₹778	₹5,733 – ₹7,002
Unskilled Labour	5 day	₹346 – ₹421	₹1,730 – ₹2,105
Machinery / Sundries
Bar cutting/bending machine	—	—	₹350
Sub-total			₹71,335 – ₹79,342
Add: Water charges (1%)			₹713 – ₹793
Add: Contractor's profit & overheads (15%)			₹10,807 – ₹12,020
Total rate per tonne			₹82,856 – ₹92,156

RCC Reinforcement Steel (Fe500D, cut–bend–place) Rate — City Comparison

City	Rate per tonne
Delhi	₹82,856 – ₹92,156
Mumbai	₹85,431 – ₹94,720
Bangalore	₹90,184 – ₹1,06,801
Chennai	₹81,447 – ₹90,747
Hyderabad	₹80,112 – ₹89,402
Pune	₹84,086 – ₹93,386
Kolkata	₹76,453 – ₹88,182
Ahmedabad	₹78,703 – ₹87,999
Jaipur	₹81,342 – ₹90,632
Lucknow	₹79,933 – ₹89,229
Indore	₹77,369 – ₹86,485
Chandigarh	₹81,342 – ₹90,632

Try it for your city

Pick any of 50 cities and any item of work in the interactive tool:

Open the Rate Analysis Tool →

About the RCC Reinforcement Steel (Fe500D, cut–bend–place) rate

The rate analysis of RCC Reinforcement Steel (Fe500D, cut–bend–place) works out the all-in cost of one tonne of work — combining material, labour and machinery as a CPWD-style analysis of rates. For RCC Reinforcement Steel (Fe500D, cut–bend–place), the materials are TMT Bar 12mm, Binding Wire, with labour (Bar Bender / Steel Fixer, Unskilled Labour) and machinery. To the sub-total, 1% water charges and 15% contractor's profit & overheads are added to arrive at the finished rate per tonne.

Worked out on current market prices, RCC Reinforcement Steel (Fe500D, cut–bend–place) costs about ₹82,856–₹92,156 per tonne in Delhi. Across cities it ranges from ₹78,703–₹87,999 in Ahmedabad to ₹90,184–₹1,06,801 in Bangalore — see the full comparison above. The largest single cost is 1050 kg TMT (₹63,000–₹69,300 per tonne). Prices are indicative market ranges and vary by brand, quantity, site and contract.

Frequently asked questions

How much does RCC Reinforcement Steel (Fe500D, cut–bend–place) cost per tonne?

Approximately ₹82,856–₹92,156 per tonne in Delhi (including 1% water charges and 15% contractor's profit & overheads). It varies city to city — from ₹78,703–₹87,999 in Ahmedabad to ₹90,184–₹1,06,801 in Bangalore.

What is the rate analysis of RCC Reinforcement Steel (Fe500D, cut–bend–place)?

It breaks the rate of one tonne into material (TMT Bar 12mm, Binding Wire), labour (Bar Bender / Steel Fixer, Unskilled Labour) and machinery, then adds water charges and contractor's overheads — exactly how a CPWD/PWD schedule-of-rates analysis is prepared.

Are these rates official?

No — they are indicative, computed from live market prices and standard coefficients. They are useful for estimates and cross-checks, but are not a substitute for a sanctioned Schedule of Rates (DSR/state SoR) or a tendered rate.

Method: standard CPWD-style analysis-of-rates coefficients × current market material/labour rates for each city, + 1% water charges + 15% contractor's profit & overheads. Concrete grades use design-mix cement content; reinforcement steel and formwork are separate items. Prices are indicative ranges — actual rates vary by brand, quantity, site and contract. Not a substitute for a sanctioned schedule of rates.