Irrigation Engineering MCQ for GATE Civil Engineering
337 Questions5 Difficulty Levels12-14% in GATEFree Practice
This topic is part of the GATE Civil Engineering syllabus. Master it through progressive practice — starting from basic recall at Level 1 and building up to GATE-level problems at Level 5.
Difficulty Levels
L1 · Foundation · 220 Qs
L2 · Understanding · 29 Qs
L3 · Application · 56 Qs
L4 · Analysis · 32 Qs
L5 · GATE Ready · 0 Qs
GATE Exam Tip: Focus on understanding concepts first, then practice numerical problems. Most GATE questions in this topic require applying 2-3 concepts together.
Practice Questions — Try 15 Samples
Select an answer and click "Check Answer" to see the explanation. For the full set of 337+ questions with progress tracking, use the interactive practice mode.
Q1 · Level 1 · WR-IRG-1325
A hydrograph visually depicts the relationship between:
Q2 · Level 1 · WR-IRG-1180
River training interventions primarily focus on which combination of factors?
Q3 · Level 1 · WR-IRG-1034
Methods to mitigate agricultural land saturation (waterlogging) include:
Q4 · Level 2 · WR-IRG-1172
Which of the following strategies can be implemented to minimize the accumulation of sediment within a reservoir?
Q5 · Level 2 · WR-IRG-1041
For agricultural applications, the permissible upper limit of boron concentration in irrigation water is:
Q6 · Level 2 · WR-IRG-1143
For an ogee-shaped spillway, the volume of water passing over it is proportional to which power of the total head (H) above the crest, including velocity head?
Q7 · Level 3 · WR-IRG-1219
When a gravity dam reservoir is empty, which of the following forces is considered in the analysis of its elementary profile?
Q8 · Level 3 · WR-IRG-1164
Reservoirs lacking integrated water management mechanisms are classified as:
Q9 · Level 3 · WR-IRG-1091
In open channel flow, a canal specifically constructed to remove excess water from waterlogged regions is identified as a:
Q10 · Level 3 · WR-IRG-1171
The efficacy of a storage reservoir in managing sediment accumulation is primarily influenced by which ratio?
Q11 · Level 3 · WR-IRG-1323
For achieving the highest possible flow velocity in a canal, what is the corresponding requirement for the hydraulic mean depth?
Q12 · Level 4 · WR-IRG-1036
As the solute concentration in water escalates, its ability to conduct electricity:
Q13 · Level 4 · WR-IRG-1287
If a canal's bed level is at 210.0 m and a drainage's peak flood level is at 212.0 m, what cross-drainage work should be implemented?
Q14 · Level 4 · WR-IRG-1335
What is the primary purpose of a diversion structure built to extract water from a river for a canal?
Q15 · Level 4 · WR-IRG-1334
The primary objectives of constructing a diversion headwork include: