Bareilly Setback Rules
Bareilly Development Authority (BDA) · Bareilly Nagar Nigam (BNN)
The UP Building Bye-laws 2025 is the operative bye-law governing setbacks, building height, and FSI for plots in Bareilly under BDA / BNN jurisdiction (Category UP Building Bye-laws 2025 — Bareilly (BDA + BNN)). Front-side margin is driven by abutting road width; side and rear margins for single-family dwellings depend on plot size; for apartments and other uses the side and rear margins scale with building height. Use the calculator below for a quick lookup, or scroll to the full tables.
Front Setback (Road-side Margin)
| Plot size | Front setback |
|---|---|
| < 150 sq.m (row-housing) | 1 m |
| ≥ 150 & < 300 sq.m | 3 m |
| ≥ 300 & < 500 sq.m | 3 m |
| ≥ 500 & < 1200 sq.m (semi-detached) | 4.5 m |
| ≥ 1200 sq.m (detached) | 6 m |
- UPMBBL-2025 sets residential setbacks by PLOT SIZE (not road width). Front, rear and side all come from the same table (Para 3.2.4.1).
- Corner plots: the side abutting the road takes a setback equal to the front; in already-approved layouts the minimum corner side setback is 1.5 m up to 500 sq.m.
- For plots < 35 sq.m in built-up areas, base FAR 2.0 with maximum coverage after setbacks.
Side & Rear Setback — Single-Family Dwelling
| Plot size | Rear margin | Side margin | Notes |
|---|---|---|---|
| < 150 sq.m (row-housing) | Not required | Not required | Row-housing: only a 1.0 m front; no rear or side setback. Up to 3 floors + stilt (15 m). Base FAR 2.0 (max 2.25). |
| ≥ 150 & < 300 sq.m | 1.5 m | Not required | Front 3.0 m, rear 1.5 m; no mandatory side margin. Base FAR 1.8 (max 2.5). |
| ≥ 300 & < 500 sq.m | 3 m | Not required | Front 3.0 m, rear 3.0 m; no mandatory side margin. Up to 4 storeys + stilt (17.5 m). Base FAR 1.75 (max 2.5). |
| ≥ 500 & < 1200 sq.m (semi-detached) | 4.5 m | 1.5 m | Front 4.5 m, rear 4.5 m, one side 1.5 m (Side-1), other side 0. Base FAR 1.5 (max 2.5). |
| ≥ 1200 sq.m (detached) | 6 m | 1.5 m | Front 6.0 m, rear 6.0 m, both sides 1.5 m. Base FAR 1.25 (max 2.5). |
Side & Rear Setback — Apartments & Other Buildings
| Building height | Rear margin | Side margin | Notes |
|---|---|---|---|
| Group housing ≤ 15 m | 5 m | 5 m | Uniform 5.0 m on all four sides (front, rear, side-1, side-2). |
| Group housing > 15 m (high-rise) | 5 m | 5 m | Minimum 5.0 m, increasing with height for fire access; no maximum height cap (governed by airport funnel / heritage / fire NOC). Front entrance setback per fire norms. |
- UPMBBL-2025 removed the maximum height cap for group housing; height is limited only by airport funnel zones, heritage-site distance and fire-safety requirements.
- A clear corridor for fire-tender movement must be maintained within the setbacks at all times.
Maximum Building Height
| Plot size | Max height | Notes |
|---|---|---|
| < 300 sq.m | 15 m | Up to 3 floors + stilt = 15 m (single unit). |
| ≥ 300 sq.m | 17.5 m | Up to 4 storeys + mandatory stilt = 17.5 m (multi-unit). |
- Group housing has NO maximum height cap under UPMBBL-2025 (subject to airport funnel, heritage distance and fire NOC).
- Rooftop tanks (≤2 m), lift rooms (≤4.5 m), mumty (≤3 m), parapet/aesthetic structures (≤1.5 m) are excluded from height.
Worked Examples
Key Definitions
Bareilly Setback & Bye-law Reference Guide
What governs setbacks in Bareilly?
Building setbacks in Bareilly are regulated by the Uttar Pradesh (Urban Areas) Building Construction & Development Bye-laws, 2025 (UP Building Bye-laws 2025), notified by the Govt. of Uttar Pradesh, Housing & Urban Planning Dept. / Lucknow Development Authority on 2025. The regulation applies across all Category UP Building Bye-laws 2025 — Bareilly (BDA + BNN) areas — meaning both the Bareilly Development Authority (BDA) city limits and the broader Bareilly Nagar Nigam (BNN) jurisdiction. Three structural factors determine your minimum setbacks: abutting road width (controls front margin and max height), plot size (controls side/rear for single-family), and building height (controls side/rear for apartments).
Front setback — driven by road width
The front (road-side) margin under UP Building Bye-laws 2025 starts at 2.5 m for roads up to 9 m wide and scales up to 9.0 m for roads 45 m and wider. For most residential plots in Bareilly on a typical 30-40 ft (9-12 m) road, the front setback is 2.5 to 3.0 m. Corner plots must observe the road-side margin on every abutting road, which can significantly reduce buildable area on tight plots. Special buildings — high-rises above 25 m, hospitals, hotels, malls, educational institutions — must keep a uniform 12.0 m road-side margin regardless of road width.
Side and rear margins — driven by plot size for residences
For single-family and two-family dwellings (DW1 and DW2 in UP Building Bye-laws 2025 terminology), side and rear margins are determined by plot area. Tiny plots up to 25 sq.m are exempt (with G+1 cap). Plots between 25 and 150 sq.m need only 1.0-1.5 m on any one side. Once plot size crosses 150 sq.m, a mandatory 2.0 m rear margin kicks in. Plots above 500 sq.m must keep 3.0 m on both sides plus 3.0 m rear. This graduated structure gives smaller, dense urban plots more buildable area while ensuring breathing room in larger plots.
Apartments and commercial — driven by building height
Multi-family, mixed-use, and commercial buildings (anything other than DW1-DW2 and industrial) follow a different logic: the taller the building, the larger the side and rear margins. A low-rise apartment up to 16.5 m needs 3.0 m on every side. Buildings between 16.5 and 25 m need 4.0 m. Buildings between 25 and 45 m need 6.0 m. Anything above 45 m needs 8.0 m. This scaling protects fire access and inter-building daylight as buildings get taller.
Margin between buildings on the same plot
Group housing schemes and multi-block developments must observe an internal margin between buildings as well, separate from plot boundaries. Per Table 6.25, this ranges from 4.5 m for buildings up to 16.5 m, to 12.0 m between buildings of 70 m. Margin from a designated common plot (open recreation area within a layout) is 3.0 m for buildings up to 25 m, and 6.0 m above that. These rules are critical at the master-plan stage; missing them means redesigning blocks late in DA approval.
Coverage of overlays and special zones
The setback tables on this page cover the standard Category UP Building Bye-laws 2025 — Bareilly (BDA + BNN) rules. Bareilly additionally has overlay zones with their own special regulations: the Sabarmati Riverfront Development zone, GAMTAL (urbanised village) areas, Core Walled City (heritage), Smart City Node (SPD5), Knowledge Precinct, and Closed Textile Mills Zone (CZ). Plots within these overlays follow the standard setback rules plus the overlay-specific provisions in Sections 7.2-7.6 and 8.1-8.4 of UP Building Bye-laws 2025. If your plot is in any of these zones, consult the full UP Building Bye-laws 2025 PDF (download link at the top of this page) before designing.
Frequently asked questions
What is the minimum front setback for a residential plot in Bareilly?
Per UP Building Bye-laws 2025 Table 6.24, the minimum road-side margin (front setback) for Category D1 plots in Bareilly ranges from 2.5 m on roads up to 9 m wide, to 9.0 m on roads of 45 m or more. For a typical 30 ft (≈9 m) wide road, the front setback is 2.5 m; for a 40 ft (≈12 m) road it's 3.0 m; for an 18 m road it jumps to 6.0 m.
What is the side and rear setback for a 200 sq.m plot in Bareilly?
For a single-family dwelling on a plot between 150 and 300 sq.m, UP Building Bye-laws 2025 requires a rear margin of 2.0 m and a side margin of 1.5 m on any one side. The other side may abut the boundary. This is per Table 6.26 of the regulation.
What is the maximum building height allowed in Bareilly?
Maximum building height under UP Building Bye-laws 2025 is governed by the abutting road width (Table 6.23). On roads less than 9 m wide, height is capped at 10 m (12 m for DW1/DW2 type residential). On 9-12 m roads it goes up to 16.5 m, on 12-18 m roads up to 30 m, and on 18 m and wider roads up to 45 m. In High Density Development Areas (where permitted FSI exceeds 3.5) on 18 m+ roads, height up to 70 m is allowed within 200 m of the road.
Are setback rules different for apartments vs single-family homes in Bareilly?
Yes. Single-family dwellings (Dwelling 1 and Dwelling 2 in UP Building Bye-laws 2025) have setbacks driven by plot size (Table 6.26). Apartments and other multi-family or commercial buildings have setbacks driven by building height — 3.0 m for buildings up to 16.5 m, 4.0 m for 16.5-25 m, 6.0 m for 25-45 m, and 8.0 m for buildings above 45 m. Front (road-side) margins follow the same Table 6.24 for both categories.
How do I calculate setbacks for my plot in Bareilly?
Use three inputs: (1) plot size in square metres, (2) abutting road width in metres, and (3) intended use (single-family, apartment, commercial). The lookup tables on this page give exact values per UP Building Bye-laws 2025. For corner plots, road-side margin applies on every abutting side. The setback calculator at the top of this page returns front, side, rear, and max height in one click.
Where can I download the official UP Building Bye-laws 2025 document?
The official Uttar Pradesh (Urban Areas) Building Construction & Development Bye-laws, 2025 PDF is published by the Govt. of Uttar Pradesh, Housing & Urban Planning Dept. / Lucknow Development Authority and hosted on UP Building Bye-laws 2025 — official Uttar Pradesh regulation. Use the "Download PDF" button at the top of this page for direct access. The regulation is approximately 600 pages; setbacks are covered in Section 6.7 (Margins) and Tables 6.23 through 6.41.
Do these rules apply to plots in AUDA areas outside the AMC limit?
Yes — UP Building Bye-laws 2025 is a state-level regulation that applies uniformly across Category D1 plots, which covers both AMC (city corporation) and AUDA (urban development authority) jurisdictions. The same Tables 6.24 and 6.26 govern setbacks. Gandhinagar Municipal Corporation (GMC) plots fall under separate tables (6.28 onwards) due to its planned-grid layout. Special zones (Riverfront, Heritage Core, GAMTAL, Smart City Node) have their own overlay rules in addition to base setbacks.
What happens if my plot doesn't meet the minimum setback?
Existing buildings in revenue records before the publication of UP Building Bye-laws 2025 are typically protected by transitional provisions. New construction or major alteration must comply with current setbacks. For sub-25 sq.m plots, only G+1 construction is permitted with no mandatory setback. For plots affected by road widening, owners can claim FSI compensation against the original boundary (Section 6.3.3) provided the surrendered land is formally transferred. Always consult a licensed architect for plot-specific guidance.
Bareilly follows the Uttar Pradesh (Urban Areas) Building Construction & Development Bye-laws, 2025, the state-wide Uttar Pradesh code, administered by Bareilly Development Authority, Bareilly Nagar Nigam. Setback, FSI and height tables are the state standard.